Meetapparatuur

The OWON XSA1015-TG Spectrum Analyzer offers a variety of features that will make it an indispensable part of your lab. Features Frequency Range from 9 kHz up to 1.5 GHz 150 dBm Displayed Average Noise Level Phase Noise -82dBc/Hz @1 Gz and offset at 10 KHz Total Amplitude Accuracy <1.5dB 10 Hz Minimum Resolution Bandwidth (RBW) EMI Pre-compliance Test Kit 1.5 GHz Tracking Generator Kit 10.4 inches display Specifications Frequency Specification Frequency Range 9kHz - 1.5 GHz Resolution 1Hz Frequency span Range 0 Hz, 100 Hz to maximum frequency of device Accuracy ± span /?swept points -1? Internal reference Reference frequency 10.000000 MHz Temperature stability < 2.5 ppm (15 ? to 35 ?? Aging rate < 1 ppm / year Bandwidth Resolution bandwidth (-3 dB) 10 Hz to 500 kHz (in 1 to 10 sequence), 1 MHz, 3 MHz Video bandwidth (-3 dB) 10 Hz to 3 MHz Amplitude Specification Displayed average noise level?DANL? Input attenuation 0 dB?1Hz resolution bandwidth Preamp off 1 MHz ~ 10 MHz - 140 dBm?nominated?10 MHz ~ 1GHz - 140 dBm?nominated?1 GHz ~ 1.5 GHz - 138 dBm (nominated) Preamp on <-82 dBc / Hz @ 10 kHz offset<-100 dBc / Hz @ 100 kHz offset<-110 dBc / Hz @ 1 MHz offset Level display range Log scale coordinate 1 dB ~ 255 dB Linear scale coordinate 0 to reference level level unit dBm, dBuW, dBpW, dBmV, dBuV, W, V Points 201 ~ 1001 Number of traces 5 Detectors Positive-peak, negative-peak, sample, normal, RMS Trace functions Clear write, Max Hold, Min Hold, View, Blank, Average Accuracy Input Attenuation Switching Uncertainty 20? ~ 30?, fc=50 MHz, Preamplifier Off, 20dB RF attenuation, input signal 0~39 dB±0.5 dB Absolute Amplitude Uncertainty 20? ~ 30?, fc=50 MHz, RBW=1 kHz, VBW=1 kHz, peak detector, 20 dB RF attenuationPreamplifier Off ±0.4 dB, input signal= -20 dBmPreamplifier On ±0.5 dB, input signal= -40 dBm Uncertainty input signal range 0 dbm ~ -50 dbm±1.5 dB VSWR input 10 dB RF attenuation?1 MHz ~ 1.5GHz<1.5, nominal Tracking generator Output frequency range 100 kHz ~ 1.5 GHz Output power level range -30 dBm ~ 0 dBm Output power level resolution 1dB Output flatness +/-3 dB Maximum safe reverse level Average total power: 30 dBm, DC: ±50 VDC Inputs and Outputs Front panel RF input connector 50 ??N-type female Front panel track generator output 50 ??N-type female 10 M reference input 50 ??N-type female Communication port USB Host, USB Device, LAN, earphone port, and VGA General technical specification Display TFT LCD, 10.4 inches Weight 5.0 kg Dimension (W x H x D) 421 x 221 x 115 mm Downloads User manual Quick guide Datasheet PC software

Lees meer minder

Peak UTP05E is a comprehensive CAT 5/5e/6 network cable analyser with superb accessories. Easy to use and very fast. Automatically identifies cable type (Straight through, cross-over, token ring etc) and verifies all the connections. Faults are clearly displayed and explained on screen. The Atlas IT will even instruct you on making up standard and special cables, complete with wire colors. Display type is alphanumeric LCD (not backlit). Features Automatic connection pattern recognition. Rapid assessment of all 8 wires within your cable. Identifies missing connections, shorted connections or incorrect connections. Will display the identity number of the 'identified' terminators to allow for easy testing and identification of multiple cable runs. Can display common cable colour codes to help you make up cables. Included UTP05 instrument. 2 miniature terminators to plug into another end of the cable run. 4 short patch cables to enable testing of patch panels and wall sockets. 24 miniature identified terminators, great for testing and identifying multiple cable runs. Pair of RJ11-to-RJ45 adapters to allow for easy testing of RJ11 based cabling. RJ45 to 8 x gold plated crocodile adapter for testing unterminated cables. Detailed printed user guide, complete with full-colour Ethernet wiring chart for common cable configurations. Alkaline battery installed and a spare alkaline battery. All supplied in a durable padded carry case. Specifications Category Cat 5, 5e, 6 (UTP) Connection type RJ45 plug or socket (RJ11 using supplied adapter set) Lines tested 8 lines (shielding not tested) Max. cable length 150 metres (500 feet) Test voltage ±5 V Test current ±2.5 mA Temperature range 10°C to 50°C (50°F to 122°F) Battery operating range 7 V to 13 V Battery type GP23, L1128, MN21, V23 (12 V Alkaline) Instrument dimensions 103 x 70 x 20 mm (4.1' x 2.8' x 0.8') Terminator dimensions 18 x 15 x 14 mm (0.7' x 0.6' x 0.6') Downloads Datasheet (EN) User Guide (EN) User Guide (DE) User Guide (FR) Common Ethernet Wiring Diagrams Avoid socket damage

Lees meer minder

Keep printing with a pack of 4 nozzles (225 micron inner diameter). These metal dispensing tips offer excellent resolution and accurate deposition of ink and solder paste.

Lees meer minder

Een SMD-Magazine Rail kan tot acht SMD-magazijnen bevatten. Een bepaalde rail kan voor onbepaalde tijd worden gebruikt voor een set magazijnen voor een specifiek project. Magazijnen worden in een rechte hoek gehouden, klaar om gepakt en geplaatst te worden door de Pixel Pump. Elke SMD-Magazine Rail presenteert tot acht magazijnen in de perfecte hoek zodat je de componenten kunt pakken en plaatsen met behulp van de Pixel Pump. Je kunt deze rails ook gebruiken om componenten te groeperen voor specifieke projecten. Ze zijn voorzien van rubberen antislipvoetjes en verzwaard voor extra stabiliteit.

Lees meer minder

SMD-Magazijnen zijn spuitgegoten houders en een geweldige manier om SMD-onderdelen te organiseren en te gebruiken. Ze zijn op maat gemaakt om onderdelen in op te slaan en te presenteren voor picking. Ze kunnen tot 12 mm brede en 9,5 mm hoge banden bevatten. Ze vervangen die moeilijk te vinden plastic zakken en zijn een uitstekende bron van onderdelen om te verzamelen en te plaatsen met de Pixel Pump. Elke SMD-Magazine Rail presenteert tot acht magazijnen in de perfecte hoek zodat je de componenten kunt pakken en plaatsen met behulp van de Pixel Pump. Je kunt deze rails ook gebruiken om componenten te groeperen voor specifieke projecten. Ze zijn voorzien van rubberen antislipvoetjes en verzwaard voor extra stabiliteit.

Lees meer minder

Pixel Pump is een open source vacuümpomp voor handmatige SMD-assemblage. Hij wordt geleverd met een comfortabele pen, een voetpedaal, RGB LED-knoppen en een aantal functies die handmatige assemblage veel leuker maken. Het is de perfecte metgezel voor het handmatig SMD-solderen, van individuele prototypes tot kleine productieruns. Doordacht ontwerp van hoge kwaliteit Pixel Pump wordt geleverd met een set van vijf roestvrijstalen mondstukken in vijf verschillende maten, met buitendiameters van 0,3 mm tot 1,8 mm. Met deze set zou je de meeste SMD-componenten moeten kunnen plaatsen, inclusief kleine 0402 componenten, grotere onderdelen zoals spoelen en IC's, en zowat alles daartussenin. De mondstukken worden op hun plaats gehouden door een Luer lock slip fitting die snel wisselen van deze mogelijk maakt en brede compatibiliteit met mondstukken van andere fabrikanten. De pen zelf heeft een snelkoppeling voor de luchtslang en vier M8 stalen moeren om hem wat stevigheid te geven en magnetische bevestiging aan de Pixel Pump mogelijk te maken. Tactiele siliconen knoppen met RGB-achtergrondverlichting bieden volledige controle over het apparaat. Je kunt de werkingsmodi wijzigen, schakelen tussen hoge en lage energie-instellingen of de omgekeerde modus activeren om de zuigmond te reinigen. Met de knoppen kun je ook dingen configureren zoals zuigkracht en LED-helderheid. Pixel Pump heeft een drukontlastingsventiel dat vacuüm dumpt om ervoor te zorgen dat je onderdeel snel wordt vrijgegeven wanneer je het voetpedaal loslaat. Optioneel kun je dat ventiel zo instellen dat het overschakelt van de zuigmodus naar de drukmodus, waardoor het mondstuk snel en eenvoudig wordt gereinigd als je per ongeluk vuil hebt opgezogen, zoals soldeerpasta. Een gesinterd luchtfilter beschermt de vacuümpomp en kleppen tegen vuil dat anders in het systeem zou kunnen worden gezogen. Het is van buitenaf toegankelijk en kan eenvoudig worden gereinigd en hergebruikt. Een perfecte metgezel voor prototypeboards en kleinschalige productie Pixel Pump is voornamelijk ontworpen voor mensen en organisaties die eenmalige prototypes maken, maar het is ook zeer geschikt voor kleine productieseries. Het is zeer eenvoudig te gebruiken en is eigenlijk sneller dan een geautomatiseerde pick-and-place machine voor kleinere batchgroottes, vooral in combinatie met SMD-Magazijnen. Pixel Pump is de perfecte metgezel voor hobbyisten en professionals die graag hun eigen printplaten maken. Kenmerken Comfortabele pen waarin verschillende mondstukken passen Kleine, flexibele, hittebestendige siliconenslang die de pen met de Pixel Pump verbindt Magnetische basis voor de pen Sterk, regelbaar vacuüm, perfect voor het oppakken van zowel kleine als grote onderdelen Tactiele, siliconen RGB-knoppeninterface Voetpedaal voor het activeren van de pomp Instelbaar hoog/laag vermogen Instelbare LED-helderheid Omgekeerde modus, die druk creëert in plaats van zuigkracht om mondstukken te reinigen Vacuümontlastklep voor snelle drukverlaging om onderdelen sneller te laten vallen Eenvoudige software-updates via USB-C Compact ontwerp dat het beperkte oppervlak van je werkbank respecteert Downloads 3D STL Files Firmware Mainboard Schematics UI Board Schematics Motor Controller Schematics

Lees meer minder

De ZD-8951 is een 3-in-1 temperatuurgeregeld digitaal soldeerstation met ingebouwde rookafzuiging en LED-verlichting. De rapid-heating functie bereikt een temperatuur van 400°C in minder dan 1 minuut. Specificaties (Soldeerbout) Vermogen: 60 W (max. 130 W) Temperatuurbereik: 160 °C tot 480 °C (320 °F tot 896 °F) PTC rapid-heating element Met °C/°F conversiefunctie Temperatuur kan eenvoudig worden aangepast met de knop. LCD-scherm met wisselende achtergrondverlichting. Met de rapid-heating functie duurt het minder dan 1 minuut om van kamertemperatuur naar een temperatuur van 400 °C (752 °F) te stijgen. Specificaties (Rookafzuiger) Vermogen: 23 W Luchtafzuiging: 1 m³/min (max) Specificaties (LED-verlichting) Vermogen: 5 W Verlichting: 12 LED's Helderheid: 242 lm

Lees meer minder

De iDraw is een veelzijdige penplotter, handschrift-imiterende tekenmachine, en XY-plotter.Gebouwd op open source is de iDraw het beste tool en hulpmiddel voor bouwers, geeks, doe-het-zelvers, studenten en docenten, en heeft multifunctionele eigenschappen. Hij kan handschrift imiteren, meesterwerken of cartoons tekenen, en lasergraveren op papier, leer, of hout. Zonder iets te hoeven solderen of programmeren is de iDraw binnen enkele minuten operationeel.Specificaties Versie A4 Metaal Oplader DC 12 V/1 A Communicatie USB-poort, offlinemodus niet ondersteund Modus Schrijven/Tekenen/Lasergraveren Werkgebied 210 x 297 mm OS Windows/Mac/Linux Ondersteuningsformaat INVOER/DRAW/SVG/JPG/BMP/PNG/DXF Herhaalbaarheid 0,1 mm XY bewegende precisie 0,1 mm Motor 42 stappenmotor, A4988-stuurprogramma Software Inkscape V1.0 Motherboard Drawcore, compatibel met EBBV2.3 Fireware coderingstype C, EBB Fireware Verpakking 100 x 100 x 550mm Gewicht 2,3 kg Downloads GitHub Software Step by step guide to assemble the hardware and install the software Seven Unboxing Tips for Metal iDraw How to assemble motors for iDraw How to install the servo and pen holder for iDraw What to buy a laser head? Video tutorials

Lees meer minder

The SQ series of handsfree probes from Sensepeek have a lower point of gravity making them even more stable compared with the original SP series of handsfree probes. All probes in the SQ series are also insulated and can be used handheld as any traditional probe but their full potential is used when measuring handsfree. The SQ series of oscilloscope probes also includes more ground options, have probe tip protection, longer cable and support for oscilloscopes with automatic scaling (10:1). All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle, color-coded cable holders and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Both length and weight of the SQ probes are perfectly balanced to be used with PCBite PCB holders and base plate which is a must for handsfree function. Features Passive 10:1 probe with support for oscilloscopes with automatic scaling Spring-loaded test needle for fine pitch measurements Multiple ground options Color coded cable holders Probe tip protection Insulated, can be used handheld Improved probe holder for handsfree measurement when used with PCBite PCB holders Included 1x SQ500 500 MHz probe with spring tipped test needle 1x SQ probe holder for handsfree measurement 1x Testhook with detachable cables (5 cm & 10 cm) for convenient ground connection 1x Alligator cable for convenient ground connection 1x Standard ground spring, for handheld measurements at rated bandwidth 1x Unique ground spring, for total handsfree measurements at rated bandwidth 1x Set of color coded cable holders (4 colors) 1x Probe tip protection 1x Extra test needle Downloads User Guide SQXX0 Rev1.1

Lees meer minder

Features Safe Design: Pinter will be immediately shut off if the top cover has been removed. This feature is turned off by default. Anycubic Slicer Software: New features are added to the software. Supports up to 8x anti-aliasing: Fast slicing, Hollowing, Split Model, Text Paste. Fast Printing Speed: The time of exposure is as low as 1.5-2 seconds, and the max print speed is 60 mm/h, making printing speed 3x faster than the Photon. High Performance Z-axis: The Z-axis is supported by dual linear rails?stepper motor and clearance nut combination which dramatically improves stability while in motion and reduces the risk of layer shifting. New Matrix UV Light Source: High quality quartz lamp bead and new matrix design for uniform UV light energy. 4K monochrome LCD delivers high-quality prints Anycubic APP Remote Control: Remote control of print operations?monitor printing progress?adjust the print settings UV Cooling System: Cooling device for stable printing performance and longer service life. Large Build Volume: A large build area for your 3D-printed creations: 192 mm (L) x 120 mm (W) x 245 mm (H) 8.9? 4K Monochrome LCD: Monochrome screens can last several thousand hours. Monochrome screens allow for very short layer exposure times for faster print times. Specifications System: ANYCUBIC Photon Mono X Operation: 3.5 inch Touch Screen Software: ANYCUBIC Photon workshop Connectivity: USB Technology: LCD-based SLA Light-source: high-quality filament?wavelength 405 nm) XY Res.: 0.050 mm 3840 x 2400 (4K) Z Axis Res.: 0.01 mm Layer Res.: 0.01-0.15 mm Printing Speed: Max 60 mm/h Rated Power: 120 W Printer Size: 270 mm (L) x 290 mm (W) x 475 mm (H) Build Volume: 192 mm (L) x 120 mm (W) x 245 mm (H) Material: 405 nm UV Resin Net Weight: ~10.75 kg Parts List User Manual SD-Card Tool set SD-Card Reader Scraper Resin Vat Platform Power Cord Service Card Wifi Antenna Glove

Lees meer minder

T80-D (T80-D12) Soldering Tip for Soldering Station AE970D (1.2 mm, chisel)

Lees meer minder

T80-B (T80-D08) Soldering Tip for Soldering Station AE970D (0.8 mm, pointed)

Lees meer minder

The 2-channel OWON XDG2035 is a function/waveform generator that can generate signals with a maximum frequency of 35 Hz. The generator has a resolution of 1 µHz and a sample rate of 500 MSa/s.The OWON XDG2035 is capable of generating 6 standard waveforms and 150 arbitrary waveforms. With the included software you can write advanced functions up to 10 million points. Waveforms can be saved to the function generator's internal memory using a PC via USB or LAN.The OWON XDG2035 also supports SCPI commands and LabView. The function generator has an integrated high-quality frequency counter, which can operate from 100 to 200 MHz.Features Max. 35 MHz frequency output 500 MSa/s Sample rate, Vertical resolution 1?Hz 14 bits Vertical Resolution, 10 Marb waveform length Comprehensive waveform output: 6 basic waveforms,and 150 built-in arbitrary waveforms Comprehensive modulation functions: AM, FM, PM, FSK, 3FSK, 4FSK, PSK, OSK, ASK, BPSK, PWM, Sweep, and Burst High-accuracy frequency counter integrated, supported range 100-200 MHz SCPI and LabVIEW supported 7 inch multi-touch screen (800 x 480 pixels) Specifications Channel 2 Frequency Output 35 MHz Sample Rate 500 MSa/s Vertical Resolution 14 bits Waveform Standard Waveform sine, square, pulse, ramp, noise, and harmonic Arbitrary Waveform exponential rise, exponential fall, sin(x)/x, step wave, and others, total 150 built-in waveforms, and user-defined arbitrary waveform Frequency (resolution 1 ?Hz) Sine 1 ?Hz-100 MHz Square 1 ?Hz ~ 30 MHz Pulse 1 ?Hz ~ 25 MHz Ramp 1 ?Hz ~ 3 MHz Noise (-3 dB, typical) 100 MHz Arbitrary Waveform 1 ?Hz ~ 15 MHz Harmonic 1 ?Hz ~ 50 MHz Accuracy ±2ppm, 25°C ±5°C Waveform Length 2 points - 10M points Amplitude Into 50? load 1mVpp ~ 10Vpp (?25 MHz); 1mVpp ~ 5Vpp (?60 MHz); 1mVpp ~ 2.5Vpp (?100 MHz) Modulation Type AM, DSB-AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, 3FSK, 4FSK, OSK, PWM, SUM Frequency Counter Function Frequency, period, +width, -width, +duty, and -duty Frequency Range 100 ~ 200 MHz Frequency Resolution 7 digits Input/Output Input mode frequency counter, external modulation input, external trigger input, internal clock output, external reference clock input/output Communication Interface USB Host, USB Device, LAN, RS232 (optional) Mechanical specifications Dimensions 340 x 177 x 90 mm Weight 2.3 kg Included 1x OWON XDG2035 1x Power Cord 1x CD-ROM 1x Quick start guide 1x USB Cable 1x BNC-BNC Cable DownloadsQuick Guide

Lees meer minder

STEMlab 125-14 (originally Red Pitaya V1.1) is an open source measurement and control tool in size of a credit card (dimensions: 107 x 60 x 21 mm). It can replace many expensive laboratory measurement instruments. The STEMlab 125-14 unit is a network attached device based on Linux operating system. It includes Radio Frequency signal acquisition and generation technologies, FPGA, Digital Signal Processing and CPU processing. The STEMlab 125-14 unit is equipped with a Micro USB socket used for console connection, a microSD slot for microSD memory card, a RJ45 socket for Ethernet connection and a USB socket used for standard USB devices.Features High performance hardware at a surprising price tag. Replaces most essential instruments: (Oscilloscope, Spectrum analyser, Signal generator, LCR meter) LAN or wireless access from any WEB browser via tablet or a PC regardless of the OS (MAC, Linux, Windows, Android, iOS). LabView and MATLAB® interface. Possibility to make your own application and share it with others. Open source software. RF inputs Number of channels: 2 Bandwidth: 50 MHz (3 dB) Sample rate: 125 Msps Input impedance: 1 M? / 10 pF Connector: SMA-F RF outputs Number of channels: 2 Bandwidth: 50 MHz Sample rate: 125 Msps Load impedance: 50 ? Connector: SMA-F Auxiliary analog input channels Number of channels: 4 Nominal sampling rate: 100 ksps ADC resolution: 14 bit Input voltage range: 0 to +3.5 V Input coupling: DC Connector: IDC connector Auxiliary analog output channels Number of channels: 4 Output type: Low pass filtered PWM PWM time resolution: 4ns (1/250 MHz) Output voltage range: 0 to +1.8 V Dimensions: 107 x 60 x 21 mmKit contents 1x STEMlab 125-14 board 1x Aluminium case 1x micro USB power supply adaptor 1x microSD card (4 GB) with pre-installed OS 1x Ethernet cable (1 m) 2x Osciloscope probes 2x SMA to BCN adapter 2x 50 ohm termination 2x SMA T adapter 1x WIFI dongle

Lees meer minder

The Siglent SDS1204X-E is a powerful 200 MHz four-channel oscilloscope that is built on the same platform as the very popular SDS1202X-E but with several significant improvements, including two 1 GSa/s ADCs and two 14 Mpt memory modules. Waveform capture rates are up to 100,000 wfms/s in normal mode and 400,000 wfms/s in sequence mode. The SDS1000X-E scopes feature a large 7” 256-level color display with intensity grading and color temperature features.Specifications Model SDS1204X-E Bandwidth 200 MHz Sampling Rate (Max.) 1 GSa/s Channels 2CH+EXT4CH Memory Depth (Max.) 7 Mpts/CH (not interleave mode); 14 Mpts/CH (interleave mode) Waveform Capture Rate (Max.) 100,000 wfms/s (normal mode), 400,000 wfms/s (sequence mode) Trigger Types Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video Serial Trigger (Standard) I2C, SPI, UART/RS232, CAN, LIN Decode Type (Standard) I2C, SPI, UART/RS232, CAN, LIN 16 Digital Channels (four channel series only, option) Maximum waveform capture rate up to 1 GSa/s, Record length up to 14 Mpts/CH USB AWG module (four channel series only, option) One channel, 25 MHz, sample rate of 125 MHz, wave length of 16 kpts Bode plot ( four channel series only) Minimum start frequency of 10 Hz, minimum scan bandwith of 500 Hz, maximum scan bandwidth of 120 MHz (dependent on Oscilloscope and AWG bandwidth), 500 maximum scan frequency points USB WIFI adapter (four channel series only, option) 802.11b/g/b, WPA-PSK, the adapter must be supplied by Siglent to ensure proper functioning

Lees meer minder

Components are both shrinking and getting increasingly finer pitch year after year but your PCBs might have grown in size or the number of interconnected PCBs or the number of handsfree PCBite probes needed to test your design may have increased making it crowded on our other smaller base plates. Features With a size of 297 x 420 mm (DIN A3) the extra large baseplate has room for most PCBs and many handsfree PCBite probes for those measurements sessions where more channels than available is needed. So if you are looking for more space, extra protection or just want to clean up your work surface then this accessory is a perfect match. Designed to be used with Sensepeeks magnetic PCBite line of products including PCB holders, hands free probes and magnifier. Included 1x XL base plate (DIN A3) with pre-fitted insulation cover

Lees meer minder

Features Internal LNA amplifier and selectable attenuator Low frequency support from 50KHz covering LF, MF, HF, VHF and UHF up to 960Mhz New HELP and SET buttons to improve user interface and configuration selection with 2-clicks Wide band coverage to all popular sub-1Ghz bands, including FM, TV and DTV, ISM, RFID, GSM, etc. Ideal choice for HAM bands from 160meters to 33cm Pocket size and light weight Solid metal case Spectrum Analyzer mode with Peak Max and Hold, Normal, Overwrite and Averaging modes High capacity internal Lithium battery for 20hs+ of continuous run, rechargeable by USB Multi-platform Windows/Linux/MacOS Open Source software and API libraries Can be extended with internal Expansion Modules for additional band and functionality Specification Frequency band: 0.05 MHz - 960 MHz Frequency span: 0.1 MHz - 960 MHz Internal selectable LNA 25 dB gain Internal selectable Attenuator 30 dB Graphics LCD 128 x 64 pixels, great visibility outdoors Support included for Windows, Linux and MacOS X Backlight for great visibility indoor Internal Lithium Ion 1800mA/h rechargeable battery Standard SMA 50 ? connector Wideband 144/433MHz dual band telescopic antenna included UHF 400-900 MHz rubber duck articulated antenna included Amplitude resolution: 0.5dBm Dynamic range: -125 dBm to 10 dBm Absolute Max input power: +30dBm Average noise level (typical LNA): -125 dBm Frequency stability and accuracy (typical): +-10 ppm Amplitude stability and accuracy (typical): +-2d Bm Frequency resolution: 1kHz Resolution bandwidth (RBW): automatic 2.6 kHz to 600 kHz Part List 1x Spectrum Analyzer 1x Mini USB cable 1x Dual band 144/430MHz Telescopic antenna 1x UHF 400-900Mhz antenna 1x EVA case

Lees meer minder

Get creative and dispense your own fluids with this pack of cartridges.

Lees meer minder

Looking to dispense materials with a lower viscosity? These are the nozzles for you. Don't use this with our standard ink or solder paste... that will result in poor performance.This pack contains 4 extra fine nozzles with an internal diameter of 0.100 mm (4 mil)

Lees meer minder

The EiBotBoard ('EBB') is a USB-based dual stepper motor controller board that is useful for many general purpose robotics applications. Originally designed for the EggBot project, it is the 'brain' of all current models of the EggBot, but also of the AxiDraw and WaterColorBot as well. The EBB was designed by Brian Schmalz of Schmalz Haus LLC. It is an open source (in both hardware and software), PIC18F46J50-based motor controller board. Standard features include two Allegro A4983 16X microstepping motor drivers for bipolar steppers. It also has a separate onboard regulator to power up to two hobby servo motors. It is 2.2 x 2.2 inches square (5.6 x 5.6 cm). We are currently shipping version 2.7 of the EBB, which features several improvements for reliability. Version 2.7 uses a standard USB micro connector and has a switch that by default turns off power to the pen-lift servo motor after one minute of inactivity. You can change the timeout duration or disable this feature using the serial command protocol. Specifications Motor driver ICs: Two Allegro A4983 Stepper motor type: Bipolar (2) Step size: Full, 1/2, 1/4, 1/8, 1/16 Motor connectors: Screw terminal USB jack type: Micro-B Power connector: Barrel Jack, 2.1 x 5.5 mm, center positive Voltage input range: 9-25 V DC Output current adjustment: 46 mA to 1.25 A per phase Downloads/Documentation GitHub

Lees meer minder