Pirate Audio Speaker is perfect voor het maken van een Lilliputian radio, geluidseffect speler, of zelfs als een teeny-weeny games console! De ingebouwde 1W luidspreker is niet de luidste, maar het is erg leuk voor veel projecten. Met het display en de afspeelknoppen kun je in een handomdraai je audio of geluidseffecten regelen. Gebruik Pimoroni's Pirate Audio software om lokale audio bestanden af te spelen (MP3, FLAC, etc) of te streamen vanaf diensten als Spotify.Features
MAX98357A DAC / versterker chip
Mono audio
Miniluidspreker (1W / 8?, bevestigd)
Push-fit luidsprekeraansluitingen
1,3' IPS-kleurenscherm (240x240px) (ST7789-driver)
Vier tactiele knoppen
Mini HAT-formaat bord
Volledig gemonteerd
Compatibel met alle 40-pin header Raspberry Pi modellen
Pirate Audio software
Afmetingen: 65x30.5x9.5mm
SoftwareDe Pirate Audio software en installer installeert de Python bibliotheek voor de LCD, configureert de I2S audio en SPI, en installeert vervolgens Mopidy en onze aangepaste Pirate Audio plugins om album art en track info weer te geven, en om de knoppen te gebruiken voor playback control.Hier ziet u hoe u aan de slag kunt:
Stel een SD-kaart in met de laatste versie van Raspberry Pi OS.
Gebonden met Wi-Fi of een bekabeld netwerk.
Open een terminal en typ het volgende:git clone https://github.com/pimoroni/pirate-audiocd pirate-audio/mopidysudo ./install.sh
Reboot uw Pi
Downloads
MAX98357A Datasheet
Pirate Audio software
This neat little board from Nanomesher adds a programmable power switch to your Raspberry Pi A+/B+/2/3/Zero/Zero W, which can be controlled by a single button or IR remote. The Cap part of the name indicates that it connects via the GPIO pins, attached to the top of the Raspberry Pi much like a HAT. It only uses the first twelve GPIO pins, though, leaving 28 spare on (most) Raspberry Pi models allowing you to attach additional hardware. The board uses 5 V micro USB input port as the Raspberry Pi itself. You only need to press the power button on the board or on the remote and the Cap will start providing power to the RPi. Features: Fully assembled ready to use Single button or Infrared (IR) remote On / Off operation Turn off Pi by triggering system shutdown, wait for the system to be fully halted and cuts power Suitable for mounting on a front face-plate Onboard Attiny85 Microprocessor can be removed and reprogrammed if needed Open Source for both Attiny software and Shutdown Script , which means you can adopt other remote controls. Directly plug onto Raspberry Pi, no jumper cable required Infrared Remote signals of all buttons can be read from Pi. It's LIRC compatible which means you can adopt other remote controls. Kodi Control support 1 x LED controllable via GPIO 3 x I2C ports Confirmed to work with latest Pi 3 B+ as well as older Raspberry Pis Note: Raspberry Pi is not included. The Pi Switch Cap comes with the generic remote. While it works out as a Pi Switch out of the box, you can also reprogram it using an Attiny MCU programmer. Being hackable, the firmware can be modified to suit your needs. The switch can be used as an Attiny development board with the following functions: Output to trigger relay. Output to LED Analog input to detect a voltage between 0-5 V Input for push button Input fan or infrared receiver which can be coded to distinguish all the buttons in the remote included Output to trigger an external digital input (pull down) The video below features the predecessor Nanomesher Hackable Pi Switch (not Pi Switch Cap).
With the Picade Desktop Retro Arcade Machine (10-inch Display) you can build your very own arcade machine.
Cabinet Features
Black, powder-coated panels
Joystick with black ball top
Acrylic marquee and console with authentic artwork
Dedicated illuminated power button
Push-fit arcade buttons
Easy access with removable back panel
3' speaker (5 W, 4 ?)
Grippy rubber feet
Dimensions: 350 x 230 x 210 mm
1024x768 (4:3 ratio) IPS (wide viewing angle) display
Pimoroni-designed and manufactured HDMI display driver board and keypad controls
Powered by micro-USB cable (included) from your Pi
Picade X HAT Features
Easy DuPont connectors for buttons and joystick
Push-fit speaker terminals
USB-C power management, power switch pins, and power button
I²S audio DAC with 3 W amplifier (mono)
4-way joystick inputs
4 utility buttons
6 player buttons
Metal standoffs to hold your Picade X HAT securely
Included
Picade enamel pin badge
Pimoroni Super Sticker Selection
Picade poster/assembly instructions
Please note: You will need to add a Raspberry Pi, USB-C power supply, and a MicroSD Card.
StromPi sends you an e-mail when his backup battery is flat! Technical details Battery type Lithium iron phosphate (LiFePO4) Capacity 1000 mAh Voltage 3.2 V Features Can be plugged directly to the StromPi 3
Charges immediately on StromPi 3
Own protection circuitry Own charging electronics Increased safety, as chemical self-ignition is not possible Significantly longer life than lithium-ion technologies Wide operating temperature range To our customers residing outside Europe: This product is prohibited from shipment by air!
Raspberry Pi 4 was welcomed by the Pi enthusiasts for the increased processing power. However, this came at a price. The RPi 4 can draw up to 3 Amps, which means it has to dissipate 15 W of power. Raspberry Pi cooling is a must. From the simplest passive heat sink, through elaborate fan blowers and even to an exotic water-cooled idea, many options are available.The Smart Fan has the form factor of the Raspberry Pi HAT. Its own tinny 32-bit processor receives commands from Raspberry Pi through the I²C interface. A step-up power supply converts the 5 V provided by Raspberry Pi to 12 V, ensuring precise speed control. Using pulse width modulation, it powers the fan just enough to maintain a constant temperature of the Raspberry Pi processor.The Smart Fan preserves all the GPIO pins, allowing any number of cards to be stacked on top of Raspberry Pi. If another add-on card has to dissipate power, a secondary Smart Fan can be added to the stack.DIN-Rail MountingTogether with multiple add-on cards, the Smart Fan can be installed on the DIN-Rail, for sturdy industrial applications.Stack Level JumperTwo Smart Fans can be installed on top of each Raspberry Pi. The assumption is that you have one more card in the stack which requires cooling. The bottom side of the Smart Fan has a jumper which needs to be installed on the second fan, in order for the Raspberry Pi to differentiate the two I²C addresses.Features
40 x 40 x 10 mm fan with 6 CFM airflow
Step-up 12 V power supply for precise fan speed control
PWM Controller modulates the fan to keep constant Pi temperature
Draws less than 100 mA of power
Stackable to itself, 2 fans can be added to Raspberry Pi
Fully stackable allows adding other cards to Raspberry Pi
Uses only I²C interface, leaves full use of all GPIO pins
Super quiet and efficient
Included
Smart Han HAT
40 x 40 x 10 mm Fan with mounting Screws
Mounting Hardware
Downloads
User's Guide
Open Source Hardware Schematic
2D CAD Drawing
Command line
Python Libraries
Node-Red Nodes
The GrovePi+ is an easy-to-use and modular system for hardware hacking with the Raspberry Pi, no need for soldering or breadboards: plug in your Grove sensors and start programming directly. Grove is an easy-to-use collection of more than 100 inexpensive plug-and-play modules that sense and control the physical world. By connecting Grove Sensors to Raspberry Pi, it empowers your Pi in the physical world. With hundreds of sensors to choose from Grove families, the possibilities for interaction are endless. Set-up in 4 simple steps Slip the GrovePi+ board over your Raspberry Pi Connect the Grove modules to the GrovePi+ board Upload your program to Raspberry Pi Begin taking in the world data Please note: Raspberry Pi board is not included
Features Support Raspberry Pi 4 Model B/ Raspberry Pi 3 Model B /Raspberry Pi 3 Model B+ DC 5V Power in (Can be powered by the Raspberry Pi) Ice Tower Structure 5mm copper tube Super heat dissipation Rated power 0.4W @5V, 0.08A Part List 2x Steel Mounting Fixer Fit for Raspberry Pi 3B+/4B 1x Ice tower CPU fan 4x M2.5x6 copper columns 2x M2x4 screws 4x M2.5x4 screws 4x Nuts 3x Thermal Conductive Tape 1x Screwdriver
Features
Abundant Expandability- You can add a hard drive by merely adding the nylon standoff and acrylic board. The OpenMediaVault includes services such as SSH, (S)FTP, SMB/CIFS, DAAP media servers, RSync, BitTorrent clients.
The E-Ink screen makes it more power-efficient. It provides you with an excellent visual experience, which is used to display Raspberry Pi's CPU temperature, CPU usage, disk usage, fan power, etc.
Simple product composition, accessories with corresponding numbers, and providing detailed tutorials make it easy to set up.
Dual fans and heat sinks installed, working automatically when the CPU temperature exceeds 54 degrees, quickly and effectively solving the heating problem of Raspberry pi motherboard.
Specification for E-Ink
Working voltage?3.3 V
Communication interface? 3-wireSPI, 4-wireSPI
Dimensions: 59.2 mm x 29.2 mm x 1.05 mm
Display size: 48.55 mm x 23.71 mm
Pitch: 0.194 x 0.194
Resolution: 250 x 122
Display color: black and white
Gray level: 2
Global refresh: 2s
Refresh function: 26.4 Mw (Typ.)
Standby power consumption < 0.017 Mw
Viewing angle > 170 °
If the manual refresh mode is set, you will need to press OK to refresh.
In auto mode, the E-Ink screen will refresh automatically every 500 ms;
Package List
1 x NAS HAT
3 x NAS 3 mm transparent acrylic
1 x Micro SD card (8 G)
1 x SATA to USB hard drive cable ( length 0.45 M)
1 x Screwdriver
4 x Silicone Pad
1 x Dual fan
3 x Heat sink
10 x M2 x 12 Screws
10 x M2 Nut
14x M3 x 8 mm Screws
10 x M2.5 x 6 mm Screws
6 x M3 x 26 mm Nylon Standoff
6 x M3 x 13 + 6 mm Single-pass Nylon Standoff
6 x M2.5 x 11 mm Nylon Standoff
6 x M2.5 x 8 + 6 mm single-pass Nylon Standoff
NOTE: It is recommended to use the RPi 4B with the SunFounder NAS Kit together, as the USB3.0 interface can provide you with higher file transfer efficiency. The SunFounder NAS Kit currently only supports the expansion of two hard-drive.
Add global GSM connectivity and GPS tracking to your project with a BerryGPS-GSM. This is an all in one module which can provide location tracking and GSM services such as data, text and SMS to your project. It comes in the same form factor as a Raspberry Pi Zero, which makes it nice and compact when used with a Raspberry Pi Zero. The two main components that make this board great are; uBlox CAM-M8 GPS module (Same GPS found on BerryGPS-IMU V3) uBlox SARA-U201 GSM for GSM connectivity, which has global coverage. Both of these modules working together results in obtaining a GPS fix in secs, using Assisted GPS. Typically, a GPS module can take a few minutes to get Time To First Fix(TTFF), or even longer if you are in built up areas. This is because the Almanac needs to be downloaded from satellites before a GPS fix can be acquired and only a small portion of the Almanac is sent in each GPS update. Assisted GPS speeds this up significantly by downloading ephemeris, almanac, accurate time and satellite status over the network, resulting in faster TTTF, in a few seconds. This is very similar how to GPS works on a smartphone. BerryGPS-GSM has been designed for the Raspberry Pi Zero, however it works with all versions of Raspberry Pi. We have created a USB-to-USB PCB connector to be used with a Raspberry Pi Zero, which is designed to make your project more compact. GPS Specific Datasheets CAM-M8-FW3_DataSheet_(UBX-15031574) CAM-M8-FW3_HardwareIntegrationManual_(UBX-15030063) GSM Specific Datasheets SARA-U201 DataSheet (UBX-13005287) SARA-U201 SysIntegrationManual_(UBX-13000995) u-blox CEL_ATCommands_(UBX-13002752)
This board is the ultimate interface between two cameras and a Raspberry Pi Compute Module. It comes with all the bells and whistles, including Ethernet, dual USB ports, GPIO header, microSD slot, HDMI output, and more. To use this board, you will need your own Raspberry Pi Compute Module, cameras, and camera ribbon cables. Two short power cables already included. Features & Specifications
Raspberry Pi Compatibility: Raspberry Pi Compute Module 1 Raspberry Pi Compute Module 3 Raspberry Pi Compute Module 3 Lite Raspberry Pi Compute Module 3+ 8 GB / 16 GB / 32 GB eMMC flash Raspberry Pi Compute Module 3+ Lite
Dimensions: Width x length: 90 mm x 40 mm Height: 23 mm (standard edition) / 15 mm (slim edition)
Video: Input: two 15-pin CSI-2 camera connectors Output: HDMI
Camera Support: Raspberry Pi camera V1 (OV5647 sensor) Raspberry Pi camera V2 (Sony IMX 219 sensor) HDMI video capture module (single mode, on Toshiba TC358743XBG chip)
Connectivity: GPIO: 40-pin classic Raspberry Pi header USB: 2 x USB Type-A, 1 x USB pin header Ethernet: RJ45 jack
Storage: MicroSD card slot (accessed by Raspberry Pi CM3/3+ Lite)
Power: 5 VDC input via two-pin header Manual power switch
Software: Firmware update via Micro USB connector Runs standard Raspbian Excellent Python support Tons of example code A. boot mode jumper H. dual USB Type-A connector B. camera 1 CSI-2 connector I. HDMI out C. micro USB (for firmware upload) J. USB port pin header D. 5 VDC power connector K. camera 2 CSI-2 connector E. power switch L. 40-pin RPi GPIO header F. microSD slot M. RPi Compute SO-DIMM connector G. RJ45 Ethernet jack
Features Portability - a 6 W panel that folds down into a super compact size. Easy to pack up and go Easily mountable - metal eye-holes in each corner (4 total) allow easy attachment to backpacks, trees, or tents Water resistant up to IPX4 rating One Regulated 5v/1A USB output - it works with your PiJuice, smartphones, tablets, audio players and more! Features SunPower solar panels which provide an industry-leading solar conversion efficiency Specification Solar panel - 5.5 V / 6 W Regulated Max output - 5 V / 5 W Single USB max output - 5 W Built-in smart-power chip Folded dimensions - 16.3 cm x 15.6 cm x 2.5 cm Unfolded dimensions - 32.8 cm x 15.6 cm x 2.4 cm Weight - 320 g CE and FCC tested Includes PiJuice Solar Panel - 6 W USB to microUSB Cable User Manual
The Explorer Board is the easy and efficient way to develop your Raspberry Pi Pico projects.
Since the most important components are already integrated, you save time and effort on wiring. The Explorer Board has a wide range of interface connectors so you can connect your projects to a variety of modules and devices. With the integrated breadboard, you can quickly build and realize your own projects.
Thanks to the possibility to connect or disconnect all modules individually, you can use your pins, which are additionally led separately to the outside, for other projects or experiment on the integrated breadboard at any time.
Features
Fast and efficient experimenting with the Raspberry Pi Pico
Raspberry Pi Pico can be plugged in directly
All modules can be switched on and off individually
Additional integrated breadboard for own development
Specifications
Integrated modules: 4 RGB LEDs, buzzer, relay, 1.8“ TFT display, DHT11 temperature sensor, 4 buttons, breadboard
Interfaces: 4x servo motor, SPI, I²C, UART, 5x crocodile clip connector
Power supply: 5 V USB-C
Dimensions: 219 x 110 x 27 mm
Downloads
Manual
Examples and libraries
The Pico Reset Button offers a direct and user-friendly solution for rebooting your Raspberry Pi Pico.
With the Reset Button, you no longer need to disconnect your Raspberry Pi Pico from the power source to reboot. Instead, the button allows you to quickly reboot with just a simple push of a button. Its compact size and easy installation by soldering it to just three points make it a handy tool.
The Reset Button is compatible with both the Raspberry Pi Pico and the newer Raspberry Pi Pico W and can be used regardless of model generation. Especially for hobbyists and developers the Pico Reset Button is a useful addition and allows an even easier and more efficient handling of the Raspberry Pi Pico.
Features
Ultra compact reset button
Allows restarting with just a simple push of a button
Reliable and permanent connection through soldering
Mounting: Soldering on the pins GND, GP22 & RUN
Dimensions: 9 x 7 x 4 mm
This is a high-performance cooling solution designed to effectively dissipate heat and ensure optimal operating temperatures for the Raspberry Pi. It is an essential accessory for users who want to enhance the performance and longevity of their Raspberry Pi device.
The compact design of the Water cooling kit for Raspberry Pi 5 allows it to be seamlessly installed on the top and bottom of the Raspberry Pi 5, ensuring efficient heat transfer and perfectly protecting the bottom of the Raspberry Pi. Its simple installation process eliminates the need for complex wiring or additional tools, making it friendly to both beginners and experienced Raspberry Pi enthusiasts.
With its powerful cooling performance, the water cooling kit for Raspberry Pi 5 for effectively dissipates heat generated by the Raspberry Pi during intensive tasks or prolonged usage. This helps prevent overheating and ensures stable performance. Efficient water-cooled cooling will allow you to connect multiple Raspberry Pi boards to a set of cooling devices. When using Raspberry Pi in a cluster, you can use a set of water-cooled devices to effectively cool multiple Raspberry Pi boards.
Features
Made for Raspberry Pi: Specially designed for Raspberry Pi 5, 1:1 mold opening, covering all heat sources, including CPU, Wi-Fi, power chip, and eMMC.
Cooling Performance: Effectively dissipates the heat generated by the Raspberry Pi, ensuring optimal operating temperatures and preventing overheating.
Easy to Use: The integrated design of the water pump and cooling fan is convenient for users to install.
RGB Color Lighting: RGB-colored lights are installed at the fan and water pump locations.
Included
1x Water cooling kit
1x Water cooling radiator
1x Black heatsink
2x Silicone hose
1x 12 V/2 A power adapter (US)
4x Hexagonal screw M2.5x10
1x L-key hex wrench
