SunFounder 4WD Robot Car Kit for Raspberry Pi Pico

  • FabrikantSunFounder

Omschrijving

Features

  • The Pico Car Kit is a Raspberry Pi Pico based, cool, robotics kit for beginners (12+ Teens) and adults to learn Raspberry Pi Pico programming, electronics assembling and robotics knowledge. (Raspberry Pi Pico with pre-soldered GPIO pins is included.)
  • The Raspberry Pico Car is equipped with a variety of module, ultrasonic module, grayscale sensor, speed sensor, etc and three 8-bit WS2812 RGB boards. In addition, this 4-wheel drive car with Pico RDP also can be DIY interesting functions.
  • The Pico robot building kit can perform Obstacle Avoidance, Object Tracking, Speed Measurement, Mileage Calculation, Line Following and Cliff Detection. In addition, the car is surrounded by three 8-bit WS2812 RGB boards that are capable of displaying cool light effects and direction indications.
  • In addition to providing MicroPython code and tutorials, the customizable application SunFounder Controller is also provided to control this robotic kit.
  • The Raspberry Pi Pico-4WD robot car kit is completely Open Source, providing structure diagrams, module schematics and source code.
  • Includes 3 8-Bit WS2812 RGB Boards Strip. Each LED can be Independently Controlled to Display a Myriad of Colors.

Package List

  • Raspberry Pi Pico × 1
  • Speed Module × 1
  • Grayscale Semsor Module × 1
  • 8-Bit WS2812B RGB × 3
  • Pico RDP × 1
  • Encoder Disk × 2
  • Ultrasonic Module × 1
  • Motor × 4
  • Servo × 1
  • Top Plate × 1
  • Bottom Plate × 1
  • Support × 4
  • Radar support × 1
  • R2056 Rivet × 4
  • R2655 Rivet × 12
  • R3055 Rivet × 6
  • Battery Holder × 1
  • Wheel × 4
  • M1.5x 4 Self-tapping Screw × 4
  • M3x8 Self-tapping Screw × 4
  • M1.4x6 Screw × 6
  • M2.5x6Screw × 10
  • M3x6 Screw × 12
  • M3x28 Screw × 10
  • M1.4 Nut × 6
  • M3 Nut 6 × 12
  • M2.5 x 11Standoff × 6
  • M3X30 Standoff × 7
  • Screwdriver × 1
  • 5-pin Wire × 2
  • 4-pin Wire × 4
  • 3-pin Wire × 5
  • Riboon × 1
  • USB Cable × 1
  • Zip Tie × 4

Online Tutorial

https://docs.sunfounder.com/projects/pico-4wd-car


Productformulier

Features The Pico Car Kit is a Raspberry Pi Pico based, cool, robotics kit for beginners (12+ Teens) and adults... Lees meer

Geen beoordelingen

Niet op voorraad

€ 84,95 incl. BTW
Leden € 76,46

      Details

      SKU: 19992
      EAN: 019992

      Omschrijving

      Features

      • The Pico Car Kit is a Raspberry Pi Pico based, cool, robotics kit for beginners (12+ Teens) and adults to learn Raspberry Pi Pico programming, electronics assembling and robotics knowledge. (Raspberry Pi Pico with pre-soldered GPIO pins is included.)
      • The Raspberry Pico Car is equipped with a variety of module, ultrasonic module, grayscale sensor, speed sensor, etc and three 8-bit WS2812 RGB boards. In addition, this 4-wheel drive car with Pico RDP also can be DIY interesting functions.
      • The Pico robot building kit can perform Obstacle Avoidance, Object Tracking, Speed Measurement, Mileage Calculation, Line Following and Cliff Detection. In addition, the car is surrounded by three 8-bit WS2812 RGB boards that are capable of displaying cool light effects and direction indications.
      • In addition to providing MicroPython code and tutorials, the customizable application SunFounder Controller is also provided to control this robotic kit.
      • The Raspberry Pi Pico-4WD robot car kit is completely Open Source, providing structure diagrams, module schematics and source code.
      • Includes 3 8-Bit WS2812 RGB Boards Strip. Each LED can be Independently Controlled to Display a Myriad of Colors.

      Package List

      • Raspberry Pi Pico × 1
      • Speed Module × 1
      • Grayscale Semsor Module × 1
      • 8-Bit WS2812B RGB × 3
      • Pico RDP × 1
      • Encoder Disk × 2
      • Ultrasonic Module × 1
      • Motor × 4
      • Servo × 1
      • Top Plate × 1
      • Bottom Plate × 1
      • Support × 4
      • Radar support × 1
      • R2056 Rivet × 4
      • R2655 Rivet × 12
      • R3055 Rivet × 6
      • Battery Holder × 1
      • Wheel × 4
      • M1.5x 4 Self-tapping Screw × 4
      • M3x8 Self-tapping Screw × 4
      • M1.4x6 Screw × 6
      • M2.5x6Screw × 10
      • M3x6 Screw × 12
      • M3x28 Screw × 10
      • M1.4 Nut × 6
      • M3 Nut 6 × 12
      • M2.5 x 11Standoff × 6
      • M3X30 Standoff × 7
      • Screwdriver × 1
      • 5-pin Wire × 2
      • 4-pin Wire × 4
      • 3-pin Wire × 5
      • Riboon × 1
      • USB Cable × 1
      • Zip Tie × 4

      Online Tutorial

      https://docs.sunfounder.com/projects/pico-4wd-car


      Recent bekeken producten

      Login

      Wachtwoord vergeten?

      Heb je nog geen account?
      Maak account aan