OWON HDS2102s 2-ch Oscilloscope (100 Mhz) + Multimeter + Signal Generator

  • FabrikantOWON

Omschrijving

The OWON HDS2102s is a portable 3-in-1 multifunctional tester, which can be used as a 2-ch oscilloscope with a bandwidth of 100 MHz, multimeter and signal generator. It features a high-contrast 3.5-inch color display suitable for outdoor facility maintenance, rapid on-site measurement, automobile maintenance, power detection. etc.

Features

  • Oscilloscope + multimeter + waveform generator, multifunction in one
  • 3.5-inch high-resolution, high-contrast color LCD display, suitable for outdoor use
  • 18650 lithium battery, can work continuously for 3-6 hours
  • USB Type-C interface, support power bank, support PC software connection
  • Self-calibration function
  • SCPI supported, facilitate secondary development

Specifications

Bandwidth 100 MHz
Channels 2-ch Oscilloscope + 1-ch Generator
Sample Rate 500 MSa/s
Acquisition Model Normal, Peak detect
Record Length 8K
Display 3.5-inch LCD
Waveform Refresh Rate 10,000 wfrms/s
Input Coupling DC, AC, and Ground
Input Impedance 1 M? ±2%, in parallel with 16pF ±10pF
Probe Attenuation Factors 1X,10X,100X,1000X,10000X
Max. input Voltage 400 V (DC+AC, PK-PK, 1M? input impedance) (10:1 probe attenuation)
Bandwidth Limit (typical) 20 MHz
Horizontal Scale 2ns/div - 1000s/div, step by 1 - 2 - 5
Vertical Sensitivity 10mV/div - 10V/div
Vertical Resolution 8 bits
Trigger Type Edge
Trigger Modes Auto, Normal, single
Automatic Measurement Frequency, Period, Amplitude, Max, Min, Mean, PK-PK
Cursor Measurement ?V, ?T, ?T&?V between cursors
Communication Interface USB Type-C

Multimeter Specifications

Max. Resolution 20,000 counts
Testing Mode Voltage, Current, Resistance, Capacitance, Diode, and Continuity test
Input Impedance 10 M?
Max Input Voltage AC 750 V, DC 1000 V
Max Input Current DC: 10 A, AC: 10 A
Diode 0-2 V

Waveform Generator Specifications

Frequency Output Sine 0.1 Hz - 25 MHz
Square 0.1 Hz - 5MHz
Ramp 0.1 Hz - 1 MHz
Pulse 0.1 Hz - 5 MHz
Arbitrary 0.1 Hz - 5 MHz
Sampling Rate 125 MSa/s
Channel 1-ch
Amplitude Range (high impedance) 20 mVpp - 5 Vpp
Waveform Length 8K
Vertical Resolution 14 bits
Output Impedance 50?

Included

  • 1x OWON HDS2102s
  • 1x Power adapter
  • 1x USB cable
  • 1x Passive probes
  • 2x Crocodile clip cable
  • 1x Set of multimeter probes (one red and one black)
  • 1x User manual
  • 1x Probe correction adjustment knife

Downloads

Productformulier

The OWON HDS2102s is a portable 3-in-1 multifunctional tester, which can be used as a 2-ch oscilloscope with a bandwidth... Lees meer

€ 249,00 incl. BTW
Leden € 224,10

      Details

      SKU: 20503
      EAN: 020503

      Omschrijving

      The OWON HDS2102s is a portable 3-in-1 multifunctional tester, which can be used as a 2-ch oscilloscope with a bandwidth of 100 MHz, multimeter and signal generator. It features a high-contrast 3.5-inch color display suitable for outdoor facility maintenance, rapid on-site measurement, automobile maintenance, power detection. etc.

      Features

      • Oscilloscope + multimeter + waveform generator, multifunction in one
      • 3.5-inch high-resolution, high-contrast color LCD display, suitable for outdoor use
      • 18650 lithium battery, can work continuously for 3-6 hours
      • USB Type-C interface, support power bank, support PC software connection
      • Self-calibration function
      • SCPI supported, facilitate secondary development

      Specifications

      Bandwidth 100 MHz
      Channels 2-ch Oscilloscope + 1-ch Generator
      Sample Rate 500 MSa/s
      Acquisition Model Normal, Peak detect
      Record Length 8K
      Display 3.5-inch LCD
      Waveform Refresh Rate 10,000 wfrms/s
      Input Coupling DC, AC, and Ground
      Input Impedance 1 M? ±2%, in parallel with 16pF ±10pF
      Probe Attenuation Factors 1X,10X,100X,1000X,10000X
      Max. input Voltage 400 V (DC+AC, PK-PK, 1M? input impedance) (10:1 probe attenuation)
      Bandwidth Limit (typical) 20 MHz
      Horizontal Scale 2ns/div - 1000s/div, step by 1 - 2 - 5
      Vertical Sensitivity 10mV/div - 10V/div
      Vertical Resolution 8 bits
      Trigger Type Edge
      Trigger Modes Auto, Normal, single
      Automatic Measurement Frequency, Period, Amplitude, Max, Min, Mean, PK-PK
      Cursor Measurement ?V, ?T, ?T&?V between cursors
      Communication Interface USB Type-C

      Multimeter Specifications

      Max. Resolution 20,000 counts
      Testing Mode Voltage, Current, Resistance, Capacitance, Diode, and Continuity test
      Input Impedance 10 M?
      Max Input Voltage AC 750 V, DC 1000 V
      Max Input Current DC: 10 A, AC: 10 A
      Diode 0-2 V

      Waveform Generator Specifications

      Frequency Output Sine 0.1 Hz - 25 MHz
      Square 0.1 Hz - 5MHz
      Ramp 0.1 Hz - 1 MHz
      Pulse 0.1 Hz - 5 MHz
      Arbitrary 0.1 Hz - 5 MHz
      Sampling Rate 125 MSa/s
      Channel 1-ch
      Amplitude Range (high impedance) 20 mVpp - 5 Vpp
      Waveform Length 8K
      Vertical Resolution 14 bits
      Output Impedance 50?

      Included

      • 1x OWON HDS2102s
      • 1x Power adapter
      • 1x USB cable
      • 1x Passive probes
      • 2x Crocodile clip cable
      • 1x Set of multimeter probes (one red and one black)
      • 1x User manual
      • 1x Probe correction adjustment knife

      Downloads

      Customer Reviews

      Be the first to write a review
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)

      Login

      Wachtwoord vergeten?

      Heb je nog geen account?
      Maak account aan