OWON HDS1021M-N 1-ch Oscilloscope (20 MHz) + Multimeter

  • FabrikantOWON

Omschrijving

Features

  • 2 in 1 (DSO + Multimeter)
  • Auto-scale function
  • 20 automatic measurements
  • Bandwidth: 20 MHz
  • USB data transmission supported
  • Waveform record and replay
  • Multimeter newly supported SCPI
  • Rechargeable Li-ion battery (6 hours' backup)

2-in-one measurement device

Oscilloscope + 3 3/4 digits multimeter + FFT spectrum analyzer.

Auto-scale function

While in auto-scale status, the oscilloscope will switch to the specific trigger mode, vertical scale, and timebase scale according to the type, amplitude, and frequency of input signal.

Adjustable trigger sensitivity

Thanks to adjustable trigger sensitivity, this device filters the overlay noise and triggers the signal stably under the circumstance of noise.

Specifications

Bandwidth 20 MHz
Sample Rate (real-time ) 500 MS/s
Horizontal Scale (s/div) 5 ns/div?100 s/div, step by 1?2.5?5
Display 3.7” color TFT display (640 × 480 pixels)
Channel single
Record Length 24K points
Vertical Sensitivity 5 mV/div?5 V/div (at input)
Vertical Resolution (A/D) 8 bits
Trigger Type Edge and Video
Trigger Mode Auto, Normal, and Single
Trigger Level ±6 divisions from screen center
Acquisition Mode Sample, Peak Detect, and Average
Waveform Storage 4 waveforms
Communication Interface mini-USB, mini-RS232
Power Supply 100 V-240 V AC, 50/60 Hz
Li-ion Battery 7.4 V, 6 hours’ operation
Dimensions (W × H × D) 115 × 180 × 40 (mm)

Multimeter Specifications

Full-Scale Reading 3 (3/4) digits (max 4000-count) diode 0 V - 1.5 V
Input Impedance 10 M? On / Off Test < 50 (± 30) beeping
Voltage VDC : 400 mV, 4 V, 40 V, 400 V, 1000 V : ±(1% ± 1 digit);
max input: DC 1000 V
VAC : 4 V, 40 V, 400 V : ±(1% ± 3 digits), 750 V : ±(2% ± 3 digits);
Frequency : 40 Hz - 400 Hz;
max input : AC 750 V (virtual value)
Current DC : 40 mA, 400 mA : ±(1.5% ± 1 digit), 10 A : ±(3% ± 3 digits)
AC : 40 mA : ±(1.5% ± 3 digits), 400 mA : ±(2% ± 1 digit), 10 A : ±(5% ± 3 digits)
Impedance 400 ? : ±(1% ± 3 digits), 40 ??
4 ?? : ±(1% ± 1 digit), 40 M? : ±(1.5% ± 3 digits)
Capacitance 51.2 nF - 100 µF : ±(3% ± 3 digits)

Software

Productformulier

Features 2 in 1 (DSO + Multimeter) Auto-scale function 20 automatic measurements Bandwidth: 20 MHz USB data transmission supported Waveform... Lees meer

Niet op voorraad

€ 239,00 incl. BTW
Leden € 215,10

    Details

    SKU: 18778
    EAN: 6950821601068

    Omschrijving

    Features

    • 2 in 1 (DSO + Multimeter)
    • Auto-scale function
    • 20 automatic measurements
    • Bandwidth: 20 MHz
    • USB data transmission supported
    • Waveform record and replay
    • Multimeter newly supported SCPI
    • Rechargeable Li-ion battery (6 hours' backup)

    2-in-one measurement device

    Oscilloscope + 3 3/4 digits multimeter + FFT spectrum analyzer.

    Auto-scale function

    While in auto-scale status, the oscilloscope will switch to the specific trigger mode, vertical scale, and timebase scale according to the type, amplitude, and frequency of input signal.

    Adjustable trigger sensitivity

    Thanks to adjustable trigger sensitivity, this device filters the overlay noise and triggers the signal stably under the circumstance of noise.

    Specifications

    Bandwidth 20 MHz
    Sample Rate (real-time ) 500 MS/s
    Horizontal Scale (s/div) 5 ns/div?100 s/div, step by 1?2.5?5
    Display 3.7” color TFT display (640 × 480 pixels)
    Channel single
    Record Length 24K points
    Vertical Sensitivity 5 mV/div?5 V/div (at input)
    Vertical Resolution (A/D) 8 bits
    Trigger Type Edge and Video
    Trigger Mode Auto, Normal, and Single
    Trigger Level ±6 divisions from screen center
    Acquisition Mode Sample, Peak Detect, and Average
    Waveform Storage 4 waveforms
    Communication Interface mini-USB, mini-RS232
    Power Supply 100 V-240 V AC, 50/60 Hz
    Li-ion Battery 7.4 V, 6 hours’ operation
    Dimensions (W × H × D) 115 × 180 × 40 (mm)

    Multimeter Specifications

    Full-Scale Reading 3 (3/4) digits (max 4000-count) diode 0 V - 1.5 V
    Input Impedance 10 M? On / Off Test < 50 (± 30) beeping
    Voltage VDC : 400 mV, 4 V, 40 V, 400 V, 1000 V : ±(1% ± 1 digit);
    max input: DC 1000 V
    VAC : 4 V, 40 V, 400 V : ±(1% ± 3 digits), 750 V : ±(2% ± 3 digits);
    Frequency : 40 Hz - 400 Hz;
    max input : AC 750 V (virtual value)
    Current DC : 40 mA, 400 mA : ±(1.5% ± 1 digit), 10 A : ±(3% ± 3 digits)
    AC : 40 mA : ±(1.5% ± 3 digits), 400 mA : ±(2% ± 1 digit), 10 A : ±(5% ± 3 digits)
    Impedance 400 ? : ±(1% ± 3 digits), 40 ??
    4 ?? : ±(1% ± 1 digit), 40 M? : ±(1.5% ± 3 digits)
    Capacitance 51.2 nF - 100 µF : ±(3% ± 3 digits)

    Software

    Customer Reviews

    Based on 1 review
    0%
    (0)
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    A
    A d.
    OW18B Sleep mode probleem

    Prima meter, Bluetooth en logging mode werken. De sleep mode heeft wel een probleem: normaal (geen backlight, bluetooth uit) batterij gebruik is 1.2mA, maar in sleep mode stijgt dit naar 6.5mA. De batterij is dan snel leeg. Altijd met de hand uitzetten dus!

    Login

    Wachtwoord vergeten?

    Heb je nog geen account?
    Maak account aan