JYE Tech DSO Shell 150 Oscilloscope DIY Kit

Compared to DSO138, the new DSO Shell has similar bandwidth with significant improvements in structure, mechanical, and operation. The sensitivity has been extended in both directions : 5mV/div – 20V/div (DSO138: 10mV/div – 5V/div.

Display and MCU are now mounted on the same mainboard to avoid inter-board pin-headers.
For better separation between analog and digital circuits, the analog channel is on a separated board. Without the analog portion, the mainboard is actually a general-purpose control board. The mainboard is fully installed (except a few through-hole components), and factory tested.DSO Shell comes with an easy to modify enclosure. Rotary encoder makes parameter adjustment quick and easy.

Power supply (not included): 9V (< 10V!) standard 5.5mm/2.1mm DC plug or 2-pin connector (0.1' pitch)Adequate soldering and troubleshooting skills required.

  • Mainboard: 109-15000-00E or 109-15000-00E1 (Performance & assembly are identical)
  • Analog board: 109-15001-00E or 109-15001-00F (Performance & assembly are identical)

Product Documents and firmware:

Specifications

Vertical Number of Channels 1
Analog Bandwidth 0 - 200 kHz
Sensitivity 5 mV/Div - 20 V/Div
Sensitivity error < 5 %
Resolution 12-bit
Input Impedance 1 MΩ
Maximum Input voltage 50 Vpk
Coupling DC, AC, GND
Horizontal Max Real-time Sampling Rate 1 Msps
Timebase 10 µs/Div - 500 s/Div
Record Length 1024
Trigger Trigger Modes Auto, Normal, Single
Trigger Types Rising / falling edge
Trigger Position 1 / 2 of buffer size fixed
Display 2.4-inch color TFT LCD 320 x 240 px
Power Supply 9 V DC (8 - 10 V acceptable)
Supply Current 120 mA @ 9 V
Physical Dimensions 115 x 75 x 22 mm
Weight 100 g without cables & power supply
Productformulier

Compared to DSO138, the new DSO Shell has similar bandwidth with significant improvements in structure, mechanical, and operation. The sensitivity... Lees meer

No reviews

SKU: 18107
EAN: 018107

Nog 3 op voorraad

€ 44,95 Incl. BTW
Leden € 40,46

    • Vandaag verstuurd? Je hebt nog: Feb 21, 2024 17:00:00 +0100

    Compared to DSO138, the new DSO Shell has similar bandwidth with significant improvements in structure, mechanical, and operation. The sensitivity has been extended in both directions : 5mV/div – 20V/div (DSO138: 10mV/div – 5V/div.

    Display and MCU are now mounted on the same mainboard to avoid inter-board pin-headers.
    For better separation between analog and digital circuits, the analog channel is on a separated board. Without the analog portion, the mainboard is actually a general-purpose control board. The mainboard is fully installed (except a few through-hole components), and factory tested.DSO Shell comes with an easy to modify enclosure. Rotary encoder makes parameter adjustment quick and easy.

    Power supply (not included): 9V (< 10V!) standard 5.5mm/2.1mm DC plug or 2-pin connector (0.1' pitch)Adequate soldering and troubleshooting skills required.

    • Mainboard: 109-15000-00E or 109-15000-00E1 (Performance & assembly are identical)
    • Analog board: 109-15001-00E or 109-15001-00F (Performance & assembly are identical)

    Product Documents and firmware:

    Specifications

    Vertical Number of Channels 1
    Analog Bandwidth 0 - 200 kHz
    Sensitivity 5 mV/Div - 20 V/Div
    Sensitivity error < 5 %
    Resolution 12-bit
    Input Impedance 1 MΩ
    Maximum Input voltage 50 Vpk
    Coupling DC, AC, GND
    Horizontal Max Real-time Sampling Rate 1 Msps
    Timebase 10 µs/Div - 500 s/Div
    Record Length 1024
    Trigger Trigger Modes Auto, Normal, Single
    Trigger Types Rising / falling edge
    Trigger Position 1 / 2 of buffer size fixed
    Display 2.4-inch color TFT LCD 320 x 240 px
    Power Supply 9 V DC (8 - 10 V acceptable)
    Supply Current 120 mA @ 9 V
    Physical Dimensions 115 x 75 x 22 mm
    Weight 100 g without cables & power supply

    Recently viewed products

    Login

    Wachtwoord vergeten?

    Heb je nog geen account?
    Maak gratis een account aan en geniet van vele voordelen.