Omschrijving
The FNIRSI 1013D is a fully featured 2-channel tablet oscilloscope with a high-resolution 7-inch LCD screen (800 x 480 pixels). The oscilloscope has a real-time sampling rate of 1 GSa/s and an analog bandwidth of 100 MHz.
With full trigger functions (single/normal/automatic), it can be used for periodic analog signals or non-periodic digital signals. The built-in high-voltage protection module can withstand a continuous voltage of up to 400 V.
Kenmerken
- Intelligent anti-burn,1X can withstand up to 400 V withstand voltage.
- 100 MHz analog bandwidth @ 1 GSa/s sampling rate (1X = 5 MHz,10X = 100 MHz).
- Fully fit 7-inch 800 x 480 resolution color TFT LCD display with bright colors and high contrast.
- Capacitive touching screen, the same as the touching mode of modern mobile tablet, is not a resistive touching screen with ancient nail operation.
- High measurement voltage range, 1X can measure 0~40 V, 10X can measure 0~400 V,100X can measure 0~4000 V.
- Up to 12 parameters measurement: VPP, VP, Vmax, Vmin, Vavg, Vrms, Frequent, Duty+, Duty-, Time+, Time?, Period.
- Cursor measurement function, it is convenient to manually measure the period and frequency and voltage.
- Complete triggering function (single, normal, automatic).
- At any time, the waveform display (pause function) is frozen.
- Equipped with high efficiency One-button AUTO.
- One-button waveform storage and screenshot.
- Built-in 1 GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data.
- Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc.
- Equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis.
- Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals.
- FFT display function, can analyze the spectral characteristics of the signal.
- Built-in 6000 mAh rechargeable lithium battery, fully charged for 4 hours of continuous use at the highest screen brightness.
- Memory compression technology, waveform refresh screen does not flicker.
- Screen brightness adjustment.
- Background grid brightness adjustment.
Toepassingen
- Electronic DIY
- Appliance repair
- Car repair
- Equipment debug
- Scientific research
- Product development
Specificaties
| Channels |
2 |
| LCD size |
7 inch |
| LCD resolution |
800 x 480 |
| Display technology |
TFT |
| Bandwidth |
100 Mhz |
| Sampling rate |
1 GSa/s |
| Rise time |
<3nS |
| Storage depth |
240 Kbit |
| Input resistance |
1 M? |
| Sensitivity |
50 mV ~ 500 V |
| Time base |
50S ~ 10nS |
| Trigger mode |
Single/Normal/Auto |
| Trigger edge |
Rising/Falling |
| Coupling |
AC/DC |
| Highest test voltage |
1X: 40 V, 10X: 400 V |
| Cursor |
Position XY, Trigger Y |
| Roll mode |
Yes |
| One button AUTO |
Yes |
| Waveform storage |
1000 pictures + 1000 waveforms |
| Waveform manager |
Yes |
| Voltage accuracy |
±2% |
| Frequency precision |
±0.01% high precision |
| Parameter |
12 kinds in total |
| Battery |
6000 mAh Lithium |
| Standby |
4 hours |
| Extension |
USB export |
| Power supply |
USB-C, 5 V @ 2 A/3 A/4 A |
| Dimensions |
184 x 124 x 50 mm |
| Weight |
650 g |
Inbegrepen
- 1x FNIRSI 1013D 2-ch Tablet Oscilloscope
- 2x 100 MHz Probes (1X and 10X)
- 1x USB charger
- 1x USB cable
- 1x Manual
Downloads
