DiP-Pi Pico Power Master for Raspberry Pi Pico

The DiP-Pi Power Master is an Advanced Powering System with embedded sensors interfaces that cover most of possible needs for application based on Raspberry Pi Pico. It can supply the system with up to 1.5 A @ 4.8 V delivered from 6-18 VDC on various powering schemes like Cars, Industrial plant etc., additionally to original micro-USB of the Raspberry Pi Pico. It supports LiPo or Li-Ion Battery with Automatic Charger as also automatic switching from cable powering to battery powering or reverse (UPS functionality) when cable powering lost. Extended Powering Source (EPR) is protected with PPTC Resettable fuse, Reverse Polarity, as also ESD.

The DiP-Pi Power Master contains Raspberry Pi Pico embedded RESET button as also ON/OFF Slide Switch that is acting on all powering sources (USB, EPR or Battery). User can monitor (via Raspberry Pi Pico A/D pins) battery level and EPR Level with PICO’s A/D converters. Both A/D inputs are bridged with 0402 resistors (0 OHM) therefore if for any reason user needs to use those Pico pins for their own application can be easy removed. The charger is automatically charging connected battery (if used) but in addition user can switch charger ON/OFF if their application needs it. DiP-Pi Power Master can be used for cable powered systems, but also for pure Battery Powered System with ON/OFF. Each powering source status is indicated by separate informative LEDs (VBUS, VSYS, VEPR, CHGR, V3V3).

User can use any capacity of LiPo or Li-Ion type; however, must take care to use PCB protected batteries with max discharge current allowed of 2 A. The embedded battery charger is set to charge battery with 240 mA current. This current is set by resistor so if user need more/less can himself to change it.

In Addition to all above features DiP-Pi Power Master is equipped with embedded 1-wire and DHT11/22 sensors interfaces. Combination of the extended powering, battery, and sensors interfaces make the DiP-Pi Power Master ideal for applications like data logger, plants monitoring, refrigerators monitoring etc.

DiP-Pi Power Master is supported with plenty of ready to use examples written in Micro Python or C/C++.

Specifications

General

  • Dimensions 21 x 51 mm
  • Raspberry Pi Pico pinout compatible
  • Independent Informative LEDs (VBUS, VSYS, VEPR, CHGR, V3V3)
  • Raspberry Pi Pico RESET Button
  • ON/OFF Slide Switch acting on all powering sources (USB, EPR, Battery)
  • External Powering 6-18 V DC (Cars, Industrial Applications etc.)
  • External Power (6-18 VDC) Level Monitoring
  • Battery Level Monitoring
  • Inverse Polarity Protection
  • PPTC Fuse Protection
  • ESD Protection
  • Automatic Battery Charger (for PCB protected LiPo, Li-Ion – 2 A Max) Automatic/User Control
  • Automatic Switch from Cable Powering to Battery Powering and reverse (UPS Functionality)
  • Various powering schemes can be used at the same time with USB Powering, External Powering and Battery Powering
  • 1.5 A @ 4.8 V Buck Converter on EPR
  • Embedded 3.3 V @ 600mA LDO
  • Embedded 1-wire Interface
  • Embedded DHT-11/22 Interface

Powering Options

  • Raspberry Pi Pico micro-USB (via VBUS)
  • External Powering 6-18 V (via dedicated Socket – 3.4/1.3 mm)
  • External Battery

Supported Battery Types

  • LiPo with protection PCB max current 2A
  • Li-Ion with protection PCB max current 2A

Embedded Peripherals and Interfaces

  • Embedded 1-wire interface
  • Embedded DHT-11/22 Interface

Programmer Interface

  • Standard Raspberry Pi Pico C/C++
  • Standard Raspberry Pi Pico Micro Python

Case Compatibility

  • DiP-Pi Plexi-Cut Case

System Monitoring

  • Battery Level via Raspberry Pi Pico ADC0 (GP26)
  • EPR Level via Raspberry Pi Pico ADC1 (GP27)

Informative LEDs

  • VB (VUSB)
  • VS (VSYS)
  • VE (VEPR)
  • CH (VCHR)
  • V3 (V3V3)

System Protection

  • Direct Raspberry Pi Pico Hardware Reset Button
  • ESD Protection on EPR
  • Reverse Polarity Protection on EPR
  • PPTC 500 mA @ 18 V fuse on EPR
  • EPR/LDO Over Temperature protection
  • EPR/LDO Over Current protection

System Design

  • Designed and Simulated with PDA Analyzer with one of the most advanced CAD/CAM Tools – Altium Designer
  • Industrial Originated

PCB Construction

  • 2 ozcopper PCB manufactured for proper high current supply and cooling
  • 6 mils track/6 mils gap technology 2 layers PCB
  • PCB Surface Finishing – Immersion Gold
  • Multi-layer Copper Thermal Pipes for increased System Thermal Response and better passive cooling

Downloads

Productformulier

The DiP-Pi Power Master is an Advanced Powering System with embedded sensors interfaces that cover most of possible needs for... Lees meer

No reviews

SKU: 19988
EAN: 019988

€ 17,95€ 14,95 Incl. BTW
Leden identiek

    • Vandaag verstuurd? Je hebt nog: Feb 21, 2024 17:00:00 +0100

    The DiP-Pi Power Master is an Advanced Powering System with embedded sensors interfaces that cover most of possible needs for application based on Raspberry Pi Pico. It can supply the system with up to 1.5 A @ 4.8 V delivered from 6-18 VDC on various powering schemes like Cars, Industrial plant etc., additionally to original micro-USB of the Raspberry Pi Pico. It supports LiPo or Li-Ion Battery with Automatic Charger as also automatic switching from cable powering to battery powering or reverse (UPS functionality) when cable powering lost. Extended Powering Source (EPR) is protected with PPTC Resettable fuse, Reverse Polarity, as also ESD.

    The DiP-Pi Power Master contains Raspberry Pi Pico embedded RESET button as also ON/OFF Slide Switch that is acting on all powering sources (USB, EPR or Battery). User can monitor (via Raspberry Pi Pico A/D pins) battery level and EPR Level with PICO’s A/D converters. Both A/D inputs are bridged with 0402 resistors (0 OHM) therefore if for any reason user needs to use those Pico pins for their own application can be easy removed. The charger is automatically charging connected battery (if used) but in addition user can switch charger ON/OFF if their application needs it. DiP-Pi Power Master can be used for cable powered systems, but also for pure Battery Powered System with ON/OFF. Each powering source status is indicated by separate informative LEDs (VBUS, VSYS, VEPR, CHGR, V3V3).

    User can use any capacity of LiPo or Li-Ion type; however, must take care to use PCB protected batteries with max discharge current allowed of 2 A. The embedded battery charger is set to charge battery with 240 mA current. This current is set by resistor so if user need more/less can himself to change it.

    In Addition to all above features DiP-Pi Power Master is equipped with embedded 1-wire and DHT11/22 sensors interfaces. Combination of the extended powering, battery, and sensors interfaces make the DiP-Pi Power Master ideal for applications like data logger, plants monitoring, refrigerators monitoring etc.

    DiP-Pi Power Master is supported with plenty of ready to use examples written in Micro Python or C/C++.

    Specifications

    General

    • Dimensions 21 x 51 mm
    • Raspberry Pi Pico pinout compatible
    • Independent Informative LEDs (VBUS, VSYS, VEPR, CHGR, V3V3)
    • Raspberry Pi Pico RESET Button
    • ON/OFF Slide Switch acting on all powering sources (USB, EPR, Battery)
    • External Powering 6-18 V DC (Cars, Industrial Applications etc.)
    • External Power (6-18 VDC) Level Monitoring
    • Battery Level Monitoring
    • Inverse Polarity Protection
    • PPTC Fuse Protection
    • ESD Protection
    • Automatic Battery Charger (for PCB protected LiPo, Li-Ion – 2 A Max) Automatic/User Control
    • Automatic Switch from Cable Powering to Battery Powering and reverse (UPS Functionality)
    • Various powering schemes can be used at the same time with USB Powering, External Powering and Battery Powering
    • 1.5 A @ 4.8 V Buck Converter on EPR
    • Embedded 3.3 V @ 600mA LDO
    • Embedded 1-wire Interface
    • Embedded DHT-11/22 Interface

    Powering Options

    • Raspberry Pi Pico micro-USB (via VBUS)
    • External Powering 6-18 V (via dedicated Socket – 3.4/1.3 mm)
    • External Battery

    Supported Battery Types

    • LiPo with protection PCB max current 2A
    • Li-Ion with protection PCB max current 2A

    Embedded Peripherals and Interfaces

    • Embedded 1-wire interface
    • Embedded DHT-11/22 Interface

    Programmer Interface

    • Standard Raspberry Pi Pico C/C++
    • Standard Raspberry Pi Pico Micro Python

    Case Compatibility

    • DiP-Pi Plexi-Cut Case

    System Monitoring

    • Battery Level via Raspberry Pi Pico ADC0 (GP26)
    • EPR Level via Raspberry Pi Pico ADC1 (GP27)

    Informative LEDs

    • VB (VUSB)
    • VS (VSYS)
    • VE (VEPR)
    • CH (VCHR)
    • V3 (V3V3)

    System Protection

    • Direct Raspberry Pi Pico Hardware Reset Button
    • ESD Protection on EPR
    • Reverse Polarity Protection on EPR
    • PPTC 500 mA @ 18 V fuse on EPR
    • EPR/LDO Over Temperature protection
    • EPR/LDO Over Current protection

    System Design

    • Designed and Simulated with PDA Analyzer with one of the most advanced CAD/CAM Tools – Altium Designer
    • Industrial Originated

    PCB Construction

    • 2 ozcopper PCB manufactured for proper high current supply and cooling
    • 6 mils track/6 mils gap technology 2 layers PCB
    • PCB Surface Finishing – Immersion Gold
    • Multi-layer Copper Thermal Pipes for increased System Thermal Response and better passive cooling

    Downloads

    Recently viewed products

    Login

    Wachtwoord vergeten?

    Heb je nog geen account?
    Maak gratis een account aan en geniet van vele voordelen.