Arduino Nano ESP32 (met headers)

Omschrijving

The Arduino Nano ESP32 is a Nano form factor board based on the ESP32-S3 (embedded in the NORA-W106-10B from u-blox). This is the first Arduino board to be based fully on an ESP32, and features Wi-Fi, Bluetooth LE, debugging via native USB in the Arduino IDE as well as low power.

The Nano ESP32 is compatible with the Arduino IoT Cloud, and has support for MicroPython. It is an ideal board for getting started with IoT development.

Kenmerken

  • Tiny footprint: Designed with the well-known Nano form factor in mind, this board's compact size makes it perfect for embedding in standalone projects.
  • Wi-Fi and Bluetooth: Harness the power of the ESP32-S3 microcontroller, well-known in the IoT realm, with full Arduino support for wireless and Bluetooth connectivity.
  • Arduino and MicroPython support: Seamlessly switch between Arduino and MicroPython programming with a few simple steps.
  • Arduino IoT Cloud compatible: Quickly and easily create IoT projects with just a few lines of code. The setup takes care of security, allowing you to monitor and control your project from anywhere using the Arduino IoT Cloud app.
  • HID support: Simulate human interface devices, such as keyboards or mice, over USB, opening up new possibilities for interacting with your computer.

Specificaties

Microcontroller u-blox NORA-W106 (ESP32-S3)
USB connector USB-C
Pins Built-in LED pins 13
Built-in RGB LED pins 14-16
Digital I/O pins 14
Analog input pins 8
PWM pins 5
External interrupts All digital pins
Connectivity Wi-Fi u-blox NORA-W106 (ESP32-S3)
Bluetooth u-blox NORA-W106 (ESP32-S3)
Communication UART 2x
I²C 1x, A4 (SDA), A5 (SCL)
SPI D11 (COPI), D12 (CIPO), D13 (SCK). Use any GPIO for Chip Select (CS)
Power I/O Voltage 3.3 V
Input voltage (nominal) 6-21 V
Source Current per I/O pin 40 mA
Sink Current per I/O pin 28 mA
Clock speed Processor Up to 240 MHz
Memory ROM 384 kB
SRAM 512 kB
External Flash 128 Mbit (16 MB)
Dimensions 18 x 45 mm

Downloads

Productformulier

The Arduino Nano ESP32 is a Nano form factor board based on the ESP32-S3 (embedded in the NORA-W106-10B from u-blox).... Lees meer

Nog 1 op voorraad

€ 24,95 € 12,50 (incl. BTW)
Leden identiek

    Details

    SKU: 20529
    EAN: 7630049203969

    Omschrijving

    The Arduino Nano ESP32 is a Nano form factor board based on the ESP32-S3 (embedded in the NORA-W106-10B from u-blox). This is the first Arduino board to be based fully on an ESP32, and features Wi-Fi, Bluetooth LE, debugging via native USB in the Arduino IDE as well as low power.

    The Nano ESP32 is compatible with the Arduino IoT Cloud, and has support for MicroPython. It is an ideal board for getting started with IoT development.

    Kenmerken

    • Tiny footprint: Designed with the well-known Nano form factor in mind, this board's compact size makes it perfect for embedding in standalone projects.
    • Wi-Fi and Bluetooth: Harness the power of the ESP32-S3 microcontroller, well-known in the IoT realm, with full Arduino support for wireless and Bluetooth connectivity.
    • Arduino and MicroPython support: Seamlessly switch between Arduino and MicroPython programming with a few simple steps.
    • Arduino IoT Cloud compatible: Quickly and easily create IoT projects with just a few lines of code. The setup takes care of security, allowing you to monitor and control your project from anywhere using the Arduino IoT Cloud app.
    • HID support: Simulate human interface devices, such as keyboards or mice, over USB, opening up new possibilities for interacting with your computer.

    Specificaties

    Microcontroller u-blox NORA-W106 (ESP32-S3)
    USB connector USB-C
    Pins Built-in LED pins 13
    Built-in RGB LED pins 14-16
    Digital I/O pins 14
    Analog input pins 8
    PWM pins 5
    External interrupts All digital pins
    Connectivity Wi-Fi u-blox NORA-W106 (ESP32-S3)
    Bluetooth u-blox NORA-W106 (ESP32-S3)
    Communication UART 2x
    I²C 1x, A4 (SDA), A5 (SCL)
    SPI D11 (COPI), D12 (CIPO), D13 (SCK). Use any GPIO for Chip Select (CS)
    Power I/O Voltage 3.3 V
    Input voltage (nominal) 6-21 V
    Source Current per I/O pin 40 mA
    Sink Current per I/O pin 28 mA
    Clock speed Processor Up to 240 MHz
    Memory ROM 384 kB
    SRAM 512 kB
    External Flash 128 Mbit (16 MB)
    Dimensions 18 x 45 mm

    Downloads

    Login

    Wachtwoord vergeten?

    Heb je nog geen account?
    Maak account aan