Raspberry Pi Behuizingen

3 producten


  • Argon ONE M.2 Case for Raspberry Pi 4

    Argon ONE M.2 Case for Raspberry Pi 4

    The Argon ONE M.2 Case ups the ante by providing two full-sized HDMI ports, power management modes that allows for automatic booting, built-in IR support with streamlined options for configuration and integrated M.2 SATA SSD support through the USB 3 ports of the Raspberry Pi 4.Argon ONE M.2 Case extended support for M.2 SATA SSDs allows you to maximize the true potential speeds of your Raspberry Pi 4. You will now be able to boot via an M.2 SATA SSD for faster boot times and larger storage capacity compared to the traditional microSD card.Argon ONE M.2 is UASP supported for the Raspberry Pi 4 which means you can maximize the transfer speeds of your M.2 SATA Drive.It is compatible with any M.2 SATA SSD with Key-B and Key B&M.Features M.2 SATA SSD CompatibilityAccepts any size of M.2 SATA SSD with Key-B or Key-B&M UASP Supported for Raspberry Pi 4Maximizes the high speed data transfers for Raspberry Pi 4 Two Full-Sized HDMIImproves the dual-monitor support of the Raspberry Pi 4 for its video input Power Management ModesOffers 2 power management options with automatic booting or “Always ON Mode” Built-in IR SupportProgrammable IR support to the Raspberry Pi with streamlined options. Works out of the box with the Argon ONE Remote. Active CoolingSoftware Programmable 30 mm FAN via the Argon ONE software Passive CoolingAluminum alloy top case acts as a giant heatsink connected to the CPU of the Raspberry Pi 4 Cable ManagementRepositioned all ports to the back of the Raspberry Pi 4 to highlight its sleek and modern design.

    € 64,95

    Leden € 58,46

  • Pibow Coupé 4 (Ninja) – Slim Case for Raspberry Pi 4

    Pibow Coupé 4 (Ninja) - Slim Case for Raspberry Pi 4

    Features Compatible with Raspberry Pi 4 only Cutout in lid for 40x30mm heatsink or Fan SHIM Super-slimline profile Fully HAT-compatible Protects your beloved Pi Clear top and base leave Raspberry Pi 4 visible GPIO cut-out Handy laser-etched port labels Leaves all ports accessible Made from lightweight, high-quality, cast acrylic Great for hacking and tinkering! Made in Sheffield, UK Weighing just over 50 grams, the case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly. The dimensions are: 99 × 66 × 15 mm. In the video below you can see a quick assembly guide.

    € 11,95

    Leden € 10,76

  • SunFounder NAS Kit for Raspberry Pi with Dual Fan

    SunFounder NAS Kit for Raspberry Pi with Dual Fan

    Features Abundant Expandability- You can add a hard drive by merely adding the nylon standoff and acrylic board. The OpenMediaVault includes services such as SSH, (S)FTP, SMB/CIFS, DAAP media servers, RSync, BitTorrent clients. The E-Ink screen makes it more power-efficient. It provides you with an excellent visual experience, which is used to display Raspberry Pi's CPU temperature, CPU usage, disk usage, fan power, etc. Simple product composition, accessories with corresponding numbers, and providing detailed tutorials make it easy to set up. Dual fans and heat sinks installed, working automatically when the CPU temperature exceeds 54 degrees, quickly and effectively solving the heating problem of Raspberry pi motherboard. Specification for E-Ink Working voltage?3.3 V Communication interface? 3-wireSPI, 4-wireSPI Dimensions: 59.2 mm x 29.2 mm x 1.05 mm Display size: 48.55 mm x 23.71 mm Pitch: 0.194 x 0.194 Resolution: 250 x 122 Display color: black and white Gray level: 2 Global refresh: 2s Refresh function: 26.4 Mw (Typ.) Standby power consumption < 0.017 Mw Viewing angle > 170 ° If the manual refresh mode is set, you will need to press OK to refresh. In auto mode, the E-Ink screen will refresh automatically every 500 ms; Package List 1 x NAS HAT 3 x NAS 3 mm transparent acrylic 1 x Micro SD card (8 G) 1 x SATA to USB hard drive cable ( length 0.45 M) 1 x Screwdriver 4 x Silicone Pad 1 x Dual fan 3 x Heat sink 10 x M2 x 12 Screws 10 x M2 Nut 14x M3 x 8 mm Screws 10 x M2.5 x 6 mm Screws 6 x M3 x 26 mm Nylon Standoff 6 x M3 x 13 + 6 mm Single-pass Nylon Standoff 6 x M2.5 x 11 mm Nylon Standoff 6 x M2.5 x 8 + 6 mm single-pass Nylon Standoff NOTE: It is recommended to use the RPi 4B with the SunFounder NAS Kit together, as the USB3.0 interface can provide you with higher file transfer efficiency. The SunFounder NAS Kit currently only supports the expansion of two hard-drive.

    € 89,95

    Leden € 80,96

Ben je op zoek naar een Raspberry Pi behuizing? Als elektrotechnicus, elektronicamaker of elektronicaliefhebber wil je je Raspberry Pi natuurlijk goed beschermen. Gelukkig biedt Elektor een ruim assortiment aan behuizingen voor de Raspberry Pi!

Wij hebben voor elke wens een passende behuizing in ons aanbod. Zo weet je zeker dat jouw kostbare mini-computer beschermd is tegen stof, vuil en mogelijke valpartijen.

Waarom een Raspberry Pi behuizing?

Waarom kies je voor een behuizing voor je Raspberry Pi? Ten eerste biedt een behuizing bescherming. Je kan de Pi in een kast of lade opbergen zonder je zorgen te hoeven maken over beschadiging.

Daarnaast biedt een behuizing ook koeling voor je Pi, wat de prestaties ten goede komt. Ook wordt het gebruik van GPIO-pinnen vereenvoudigd, omdat de pinnen van de Pi beter toegankelijk zijn wanneer deze zich in een behuizing bevinden.

Bij Elektor bieden we alleen hoogwaardige Raspberry Pi behuizingen aan. Onze behuizingen zijn gemaakt van stevig materiaal en bieden optimale bescherming tegen schade van buitenaf. Zo hoef je je geen zorgen meer te maken over de veiligheid van jouw Raspberry Pi.

Kortom, als het gaat om Raspberry Pi behuizingen, is Elektor jouw one-stop-shop. Of je nu op zoek bent naar bescherming, koeling of toegankelijkheid, wij hebben het antwoord. Bekijk ons assortiment vandaag nog en bescherm jouw Raspberry Pi met onze hoogwaardige behuizingen.

Raspberry Pi 4 behuizing: bescherm je krachtige mini-computer

Als je op zoek bent naar een hoge mate van bescherming voor je Raspberry Pi 4, dan biedt onze Raspberry Pi 4 behuizing uitkomst. Gemaakt van duurzaam materiaal, en ontworpen met het oog op functionaliteit, biedt deze behuizing ultieme bescherming voor je krachtige mini-computer.

Door de nauwsluitende pasvorm en goed geventileerde behuizing blijft je Pi koel en efficiënt werken. Of je nu een beginner bent of een ervaren gebruiker, onze Raspberry Pi 4 behuizing is de perfecte oplossing voor al je behoeften.

Raspberry Pi 4 behuizing met SSD: optimale prestaties voor je Raspberry Pi

De Raspberry Pi 4 is een krachtige minicomputer, maar als je de prestaties nog verder wilt verbeteren, dan is onze Raspberry Pi 4 behuizing met SSD de juiste keuze voor jou. Deze behuizing is speciaal ontworpen om jouw Raspberry Pi 4 te upgraden met een SSD, zodat je circuits razendsnel worden geladen en software en bestanden snel worden opgeslagen. De behuizing biedt een goede koeling en bescherming tegen schade.

Raspberry Pi behuizing met ventilator: houd je Pi koel en efficiënt

Ben je op zoek naar een oplossing om oververhitting van je Raspberry Pi te voorkomen? Dan is onze Raspberry Pi behuizing met ventilator de ideale oplossing. Deze behuizing is ontworpen met het oog op efficiënte koeling, zodat je Pi optimaal blijft presteren, zelfs tijdens de meest intensieve taken. De ventilator is niet alleen geruisloos, maar zorgt er ook voor dat de behuizing altijd goed geventileerd blijft.

Login

Wachtwoord vergeten?

Heb je nog geen account?
Maak account aan