This aluminium case in a precious design is very robust and protects your Raspberry Pi 4 perfectly against outer influences. There are cut-outs for all interfaces to make them accessible. The channel milling at the top side serves as a heat sink and inside the housing the case is in direct contact with the CPU and the RAM to maximize cooling results. Features Color: Matt black (gun-metal black) Material: High-quality, cast aluminium Special Features: Channel milling which serves as a heatsink, cut outs for all interfaces, heatsink in contact with CPU and RAM of the Raspberry Pi for better cooling performance Dimensions: 91 x 65 x 34 mm Items delivered Aluminium case Screws Heat conduction pads
This aluminium-based Armor Case is perfect for your Raspberry Pi 4 if it gets hot, as this protects it against shocks and heat equally. Channel milling combined with dual fans offers best cooling performance. That‘s why it is suitable for extreme settings. Another benefit is that this case does not need more space than the Raspberry Pi itself and can be integrated in existing projects.Features
Material: CNC milled aluminium alloy
Compatible with Raspberry Pi 4B
Assembly: 4 included screws connect the case to the Raspberry Pi
Special features: Large heat sink and dual fan each Ø24 mm, massive protection against heat and shocks, no additional space needed
Wiring: Fan 5V (Red) - 5V (Pin4), Fan GND (Black) - GND (Pin6)
Scope of delivery: Armor case “BLOCK ACTIVE”, screws, thermal tape
Size top side: 69 x 56 x 15.5 mm
Size bottom side: 87 x 56 x 7.5 mm
DownloadsManual
The robust plastic housing made of acrylic convinces by modern design and technical innovation. The only distinguishing feature is the new locking mechanism of this housing. It can be assembled in a few steps and the magnetic lock provides easy access to the GPIO pins and the Raspberry Pi 4 B at any time. Thanks to the strong magnets in the upper, middle and lower part of this housing, screw-less mounting is possible. So the cover can be removed at any time. The two integrated fans and the included heat sinks provide a constant cooling of the Raspberry PI 4B. The JOY-iT Acrylic Case with Dual Fan will protect your Raspberry Pi 4 B against exterior impacts and excessive heat development. You can assemble the screwless case in just 4 clicks. The silent twin fans work reliably under high load. Features Material: Plastic Colour: Black and transparent Compatible with Raspberry Pi 4 B Special Features: Built-in dual fan Dimensions: 67 x 97 x 27 mm Weight: 154 g Downloads Datasheet Manual
USB-A to Micro USB-B power cable (power supply only) 1.5 m length with ON/OFF switch Add the ability to control the power to your USB-powered project simply by plugging a cable with a switch between the USB power port and the USB cable. There's no more need to pull the cable to restart or reboot your devices, just press the button to turn on and off, which helps to prevent the USB connector from wear and tear due to frequent pulling and inserting the USB cable. It can be used as a power supply up to 2 A. Not applicable for data transfer.
Met de StromPi 3 heeft JOY-iT nu het volgende uitbreidingsbord op de markt gebracht dat aan uw stroombehoefte zal voldoen. Met een spanningsbereik van 6-61 V en een stroom tot 3 A, kunnen zelfs grotere projecten van voldoende stroom worden voorzien. De afzonderlijke ingangen kunnen nu op verschillende manieren worden geprioriteerd, waardoor de StromPi 3 perfect aan uw project kan worden aangepast. Naast de reeds beschikbare spanningsingangen kan de nieuwe StromPi 3 nu worden aangevuld met een optionele plug-in batterij-unit die met een LiFePO4-batterij een oplaadbare noodstroombron toevoegt aan uw Raspberry Pi. Hierdoor behoren onverwachte stroomonderbrekingen tot het verleden! Daarnaast heeft de StromPi 3 nu ook zijn eigen configureerbare en autonoom werkende microsysteemunit, die gebruikt kan worden voor een programmeerbaar start-stop gedrag. Laat uw systeem op vooraf ingestelde tijden op en neer lopen om metingen uit te voeren of om apparaten aan en uit te schakelen (ook ideaal voor digital signage of machinebesturing). De RTC (real-time klok) in het microsysteem kan ook worden gebruikt om de werkende Raspberry Pi te synchroniseren zonder toegang tot internet. Met de nieuwe StromPi 3 bent u perfect toegerust voor allerlei projecten! Technische specificaties Voltage-ingang Micro-USB, breed bereik: 6-61 V Voltage uitgang 5 V, 3 A / RPi-PinHeader + USB Compatibel met Raspberry Pi (A+, B+, 2B, 3, 3B, 3B+, 4B), Banana Pi M2, via USB-uitgang: veel meer single board computers zoals Arduino, pcDuino, Red Pitaya en nog veel meer Optionele Uitbreidingen Inplugbaar batterijpakket (apart verkrijgbaar) met een 1000 mAh LiFePO4 batterij Microcontrollerbesturing Programmeermogelijkheid door prioriteit te geven aan de afzonderlijke ingangen in geval van nood (Power Path) Extra functies RTC real-time klok (programmeerbaar start/stop-gedrag), besturing via seriële interface (data-uitgang, besturing), optionele oplaadbare batterij wordt tijdens bedrijf direct opgeladen Afmetingen Afmetingen 55 x 54 x 20 mm Downloads Klik hier voor bijgewerkte handleidingen, scripts en nieuwe firmware >>
Tower-Case for Raspberry Pi Server Cluster Material Acryl, brass Capacity up to 7 boards Color Transparent Dimensions 75 mm x 104 mm x 202 mm Weight 226 g
This small 14.1 x 8.2 cm Mini Wireless Keyboard is a practical universal tool with an integrated touchpad that saves you the hassle of using a separate mouse. If you use your Raspberry as a multimedia platform, this keyboard is a must. The large range of 10 metres allows you to take control from the comfort of your sofa. Due to the integrated RGB lighting, operation in the dark is no problem. Beside many special keys all keys of a conventional keyboard are also present. The integrated rechargeable battery can be recharged conveniently via the existing Micro USB connection with any commercially available power supply unit. Features Full functionality of a large keyboard Many additional function keys Wireless connection with 10-meter range Integrated rechargeable battery / charging via Micro-USB Adjustable RGB illumination Touchpad Technical details Number of keys: 80 Keyboard layout: QWERTZ with ä, ü, ö Frequency: 2.4 GHz Transmission power: +5 db max. Operating voltage: 3.7 V Charge current: < 200 mA Current in idle state: < 30 µA Battery type: BL-5B Battery capacity: 300 mAh Special functions: Adjustable RGB backlight, media buttons, integrated touchpad, rechargeable battery Dimensions: 141 x 82 x 13 mm Weight: 105 g
Material: Aluminium Color: Matt black Compatible with: Raspberry Pi 2, 3 and 4 with attached StromPi 3 and Battery Hat Options of Mounting: DIN rail, M4 threaded holes on the bottom of the case Amounts of M4 threads: 4 Active cooling Low-profile heatsink and PCB for fan control and power button included Dimensions: 59 mm x 64 mm x 105 mm
This battery hat with LiFePO4 battery turns the StromPi V3 into a full-featured UPS solution. The replacement battery is provided as third current source, is surveilled and will be recharged automatically. With the doubling of the rated capacity, the lifespan is nearly twice as long as well in comparison to the 1000 mAh battery. It is based of the LiFePo4 technoloy and offers more essential advantages compared to the standard lithium-ION structures: increased security because there can not be a chemical spontaneous combustion a longer life time as lithium ION technology more charge cycles the battery gets automatically charged if it runs with a external voltage source In the battery electronic, protection circuits against overload, short-circuits and deep discharging are integrated. SPECIFICATIONS TYPE Lithium iron phosphate (LiFePO4) CAPACITY 2000 mAh VOLTAGE 3.2 V SPECIAL FEATURES directly attachable to the StromPi 3, will be charged immediately, pin header lead-through, own protection- and charge electronic, More Security: no chemical self ignition possible, Essentially longer Lifespan than Lithium-Ion technology DIMENSIONS 65 x 56 x 22 mm ITEMS SHIPPED Battery Pack EAN 4250236819891 ARTICLE NO. RB-StromPi3BAT-XL
De BME680 van Bosch Sensortec is de nieuwe, compacte omgevingssensor met geïntegreerde sensortechnologie voor luchtvochtigheid, luchtdruk, temperatuur en luchtkwaliteit.De digitale interfaces I²C en SPI maken bovendien een eenvoudige en snelle uitlezing van de meetwaarden mogelijk.Specificaties
Digitale interfaces
I²C, SPI
Werkspanning
3-5 V
Compatibel met
Arduino, Raspberry Pi
Afmetingen
30 x 14 x 10 mm
Gewicht
10 g
Luchtvochtigheids sensor
Reactietijd
8s
Tolerantie nauwkeurigheid
± 3%
Hysteresis
? 1.5%
Luchtdruk sensor
Luchtdrul bereik
300-1100 hPa
Relatieve nauwkeurigheid
± 0.12 hPa
Absolute nauwkeurigheid
± 1 hPa
Temperatuur sensor
Temperatuurbereik
-40°C - 85°C
Bereik nauwkeurigheid
0°C - 65°C
Luchtkwaliteit sensor
Reactietijd
1s
Downloads
Datasheet
Gebruiksaanwijzing
If you are searching for a possibility to keep your Raspberry Pi cool, than this mini fan is the perfect possibility for this. The active cooler is ready to use right after pluging in the two GPIO pins into the 5V and GND GPI-O port. The cooler is compatible to all Raspberry Pis and is perfect to keep them cool, even under full load. Voltage: 5 V Current: 0.2 A Dimensions: 30 x 30 x 7 mm
Features Jack: 1x Micro USB power plug + 1x RJ45 output port Input Voltage: 36~57 V (standard PoE voltage 48 V, 52 V) Output Voltage: DC 5 V Output Current: 2 A Transmission Distance: 10~100 m PoE Protocol: IEEE802.3af Network Bandwidth: 10/100 Mbps Weight: 40 g Product Dimension: 82 x 28 x 23 mm Cable Length: 205 mm Operation Temperature: -50 °C up to +75 °C
The extension set adds 5 more sensors and modules to your experiment case. The required connections are provided by the Port-Doubler board.The set includes an ADC, a linear potentiometer, a joystick module, a magnetic sensor, a pressure and temperature sensor, the Port-Doubler board, a breadboard and a cable set.With the Port-Doubler board, you can now also connect your own projects with the Raspberry Pi and the Joy-Pi, thus extending the range of applications considerably.Specifications
ADC (for connecting analog sensors): 4-channel 12-bit accuracy (ADS1115)
Linear potentiometer: 10 k?
Magnetic sensor: Linear magnetic Hall sensor (49E)
Pressure and temperature sensor: BMP280
Joystick: Analog 2-axis joystick module with button
Included
Port-Doubler board
Joystick module
ADC
Pressure and temperature sensor
Linear potentiometer
Magnetic sensor
Cable set
Breadboard
Met dit flash-geheugen kun je gegevens extern opslaan en lezen via de SPI-interface van je microcontroller. De bediening van de module is precies hetzelfde als bij een gewone SD-kaart en is daarom bijzonder eenvoudig. De module is vooral geschikt voor mobiele opstellingen, waar normale SD-kaarten uit het SD-cardslot zouden kunnen glippen. Specificaties Speciaal kenmerk Werking op 3 V en 5 V door de geïntegreerde spanningsconverter Voeding Vcc 3-5 V Logica niveau Vcc Interface SPI Geheugen 512 MB Klok frequentie Up to 50 MHz Afmetingen 18 x 22 x 12 mm Gewicht 3 g
StromPi sends you an e-mail when his backup battery is flat! Technical details Battery type Lithium iron phosphate (LiFePO4) Capacity 1000 mAh Voltage 3.2 V Features Can be plugged directly to the StromPi 3
Charges immediately on StromPi 3
Own protection circuitry Own charging electronics Increased safety, as chemical self-ignition is not possible Significantly longer life than lithium-ion technologies Wide operating temperature range To our customers residing outside Europe: This product is prohibited from shipment by air!
The Explorer Board is the easy and efficient way to develop your Raspberry Pi Pico projects.
Since the most important components are already integrated, you save time and effort on wiring. The Explorer Board has a wide range of interface connectors so you can connect your projects to a variety of modules and devices. With the integrated breadboard, you can quickly build and realize your own projects.
Thanks to the possibility to connect or disconnect all modules individually, you can use your pins, which are additionally led separately to the outside, for other projects or experiment on the integrated breadboard at any time.
Features
Fast and efficient experimenting with the Raspberry Pi Pico
Raspberry Pi Pico can be plugged in directly
All modules can be switched on and off individually
Additional integrated breadboard for own development
Specifications
Integrated modules: 4 RGB LEDs, buzzer, relay, 1.8“ TFT display, DHT11 temperature sensor, 4 buttons, breadboard
Interfaces: 4x servo motor, SPI, I²C, UART, 5x crocodile clip connector
Power supply: 5 V USB-C
Dimensions: 219 x 110 x 27 mm
Downloads
Manual
Examples and libraries
The Pico Reset Button offers a direct and user-friendly solution for rebooting your Raspberry Pi Pico.
With the Reset Button, you no longer need to disconnect your Raspberry Pi Pico from the power source to reboot. Instead, the button allows you to quickly reboot with just a simple push of a button. Its compact size and easy installation by soldering it to just three points make it a handy tool.
The Reset Button is compatible with both the Raspberry Pi Pico and the newer Raspberry Pi Pico W and can be used regardless of model generation. Especially for hobbyists and developers the Pico Reset Button is a useful addition and allows an even easier and more efficient handling of the Raspberry Pi Pico.
Features
Ultra compact reset button
Allows restarting with just a simple push of a button
Reliable and permanent connection through soldering
Mounting: Soldering on the pins GND, GP22 & RUN
Dimensions: 9 x 7 x 4 mm
