Power Supplies

27 producten

  • EU Voeding voor Arduino Uno (9 V, 1 A)

    € 7,95

    Leden € 7,16

  • Bijna uitverkocht PeakTech 6080 A DC Power Supply (15 V, 3 A)

    PeakTech PeakTech 6080 A DC Power Supply (15 V, 3 A)

    Due to the linear technology used, this model does not generate any high-frequency interference, and a safety transformer, according to EN-61558-2-6, was also used, which outputs a safety extra-low voltage (SELV) to ensure maximum user safety. This power supply, with its modern design, was specially designed for the service and education sector and convinced with its excellent price/performance ratio. Linear regulated DC laboratory power supply unit Overload protection and short-circuit proof 4-digit blue digital display for current and voltage 4 mm safety sockets Passive cooling / fanless housing design Safety transformer for SELV according to EN-61558-2-6 Safety: EN-61010-1 Accessories: Power cord and operating instructions

    € 84,95

    Leden € 76,46

  • Bijna uitverkocht OWON P4603 DC Power Supply (180 W)

    OWON OWON P4603 DC Power Supply (180 W)

    Features Channel Single Channel Output Total Output Power 180 W Channel Output 0 - 60 V / 0 - 3 A × 1-CH Display 3.7' color LCD display Dimension 117 mm(L) × 194 mm(H) × 295 mm(D) Weight Approx. 5.8 kg Interface RS232 Specifications Rated Output (0 ℃ - 40 ℃) Voltage 0 - 60 V Current 3 A Load Regulation Voltage ≤ 0.01% + 3 mV Current ≤ 0.01% + 3 mA Power Regulation Voltage ≤ 0.01% + 3 mV Current ≤ 0.01% + 3 mA Setting Resolution Voltage 1 mV Current 1 mA Readback Resolution Voltage 1 mV Current 1 mA Setpoint accuracy (within 12 months) (25 ℃ ± 5 ℃) Voltage ≤ 0.03% + 10 mV Current ≤ 0.1% + 5 mA Readback Resolution (25 ℃ ± 5 ℃) Voltage ≤ 0.03% + 10 mV Current ≤ 0.1% + 5 mA Ripple/Noise (20 Hz - 20 MHz) Voltage (Vp-p) ≤ 4 mVp-p Voltage (Vrms) ≤ 1 mVrms Current (rms) ≤ 4 mArms Output temperature coefficient (0 ℃ - 40 ℃) Voltage ≤ 0.03% + 10 mV Current ≤ 0.1% + 5 mA Readback temperature coefficient Voltage ≤ 0.03% + 10 mV Current ≤ 0.1% + 5 mA Response Time 100 μs Storage 5 groups of data Working Temperature 0 - 40 ℃

    € 169,95

    Leden € 152,96

  • Bijna uitverkocht JOY-iT DPM8605 Programmable Power Supply (0-60 V, 0-5 A)

    JOY-iT JOY-iT DPM8605 Programmable Power Supply (0-60 V, 0-5 A)

    The JT-DPM8605 is a programmable buck power supply which converts voltage and current down. It has both a constant voltage – and a constant current mode. With its TTL interface, it is possible to manage any setting comfortably via your PC with a free software. This easy operability and the high accuracy of the current and voltage display make this device stand out. On the device, there are 4 buttons to control it manually, too. The display has got a diagonal of 1.7 Inch (4.3 cm).As optional equipment for this power supply, there is a wireless control panel available, which enables telecommanding from a distance of up to 10 meters (without any obstacles) to any setting and data.Specifications Interface TTL Input Voltage 10-75 VDC Output Voltage 0-60 VDC Output Current 0-5 A Power 0-300 W Voltage Resolution 10 mV Current Resolution 1 mA Ripple <50 mVpp Response Time <50 ms Voltage Display Accuracy 10 mV Current Display Accuracy 1 mA Voltage Fault Tolerance 2 ‰ + 1 digit Current Fault Tolerance 5 ‰ + 1 digit Operating Temperature -10°C - 45°C Dimemsions 131 x 112 x 55 mm Weight 260 g Downloads JT-DPM8605 Datasheet JT-DPM8600 Manual JT-DPM86xx Driver Software

    € 42,95

    Leden € 38,66

  • Bijna uitverkocht JOY-iT DPS5005 Programmable Power Supply

    JOY-iT JOY-iT DPS5005 Programmable Power Supply

    This power supply combines analog and digital technologies in an advanced design, offering outstanding precision and accuracy. The adjustable output reaches up to 50 V or 5 A and can be precisely configured in 10 mV or 1 mA steps. The operation of the device has been optimised for particularly simple operation and the colour display offers a particularly detailed and comprehensive presentation of information. Among other things, the current voltage and current values, pre-settings and output powers can be depicted here. Dynamic notification symbols also provide a clear overview. The additional settings menu offers maximum control of overcurrent and overvoltage values as well as other parameters. The DPS5005 offers modern design and advanced technology in a compact package, making it the ideal power supply. Input voltage 6 V - 55 V Output voltage 0 - 50 V Output current 0 - 5 A Output power 0 - 250 W Weight 88g Display size 1,44“ Case cut-out 39 x 71 mm Dimensions 42 x 45 x 80 mm Accuracy of the output voltage ± 0,5% Accuracy of the output current ± 0,5%

    € 42,95

    Leden € 38,66

  • JOY-iT DPH5005 Programmable Buck & Boost Power Supply

    JOY-iT JOY-iT DPH5005 Programmable Buck & Boost Power Supply

    2 reviews

    De DPH5005 voldoet aan vele eisen van een labvoeding. Deze voeding combineert analoge en digitale technologieën in een geavanceerd ontwerp met uitstekende precisie en nauwkeurigheid. De regelbare uitgang kan tot 50 V of 5 A reiken en nauwkeurig worden ingesteld in stappen van 10 mV of 1 mA.De voedingseenheid is bovendien uitgerust met een uitschakelbaar parametergeheugen en tien programmeerbare datageheugens.De bediening van het apparaat is geoptimaliseerd voor bijzonder eenvoudige bediening en het kleurendisplay biedt goede gedetailleerde en uitgebreide informatie. Hier kunnen onder andere de actuele spannings- en stroomwaarden, voorinstellingen en uitgangsvermogens worden weergegeven. Ook dynamische waarschuwingssymbolen bevorderen de duidelijkheid. Een extra instellingenmenu biedt maximale controle over overstroom- en overspanningswaarden en andere parameters. De DPH5005 biedt een modern ontwerp en geavanceerde technologie in een compacte behuizing, waardoor het de ideale voeding is.Bovendien kun je de laboratoriumvoeding aanvullen met de optioneel verkrijgbare behuizing.Specificaties Display Type LCD Ingangsspanning 6-50 V (DC) Uitgangsspanning 0-50 V Uitgangsstroom 0-5 A Uitgangsvermogen 0-250 W Spannings resolutie 0.01 V Stroom resolutie 0.001 A Speciale kenmerken Programmeerbaar, compact Rimpel 100 mVpp Afmetinegen (Display module) 43 x 79 x 38 mm Afmetingen (Power module) 93 x 35 x 72 mm Display afmetingen 1.5' (3.8 cm) Gewicht 202 g In de doos Display en power module, 2 verbindingskabels Downloads Datasheet Handleiding PC Software / Android APK

    € 74,95

    Leden € 67,46

  • Sale -19%Bijna uitverkocht PeakTech 1575 DC Power Supply (32 V, 20 A)

    PeakTech PeakTech 1575 DC Power Supply (32 V, 20 A)

    This high graded Switching Mode Power Supply is designed for a wide range of applications for telecommunications, laboratory and industry. The power efficient circuit design allows units to have a small form factor with low profile and small footprint casing. The intelligent fan speed control program checks the fan at power on and adapts the right speed to ensure a quiet and safe operation of the power supply at different ambient temperatures and power output levels. The new developed control of the USB 2.0-interface via PC-Software gives the user the ability to run cyclical operations with programmable voltage, current, period of time and cycles. The dual action (coarse and fine set) control knobs make tuning the voltage and current level ever so smooth, precise and fast, due to the rotary encoder and microprocessor control. Setting the CC current limiting can be done in open circuit at output jacks. The three user defined presets of voltage and current limiting levels facilitate quick access to frequently used Volt/Ampere settings. The full remote control functionality offer a wide range of operation possibilities for the industrial and professional users. High RFI immunity and excellent EMI Overload, over temperature an tracking over voltage protections 3 user defined, recallable settings for voltage and current values Full remote control of voltage and current and output control on an off via the analog port PC-Software for remote control via USB 2.0 Time programmable cycles of current and voltage with PC software Isolated ground, active PFC and high power efficiency, intelligent fan control from zero to full speed Rotary encoder control knob with coarse and fine tuning LabVIEW driver included Saftey: EN 61010-1, EN 60950-1 Accessories: power cable, USB interface cable, software for Windows XP/Vista/7/8 and manual Display 3-digit 15 mm green LED display Output voltage 1 ~ 32 V DC adjustable Output current 20 A / 5 A (main output (rear panel) / front output) Output power 640 W Residual ripple 5 mVrms Efficiency > 87 % Operating voltage 200 ~ 240 V AC; 50/60 Hz Dimensions (WxHxD) 200 x 90 x 255 mm Weight 2.6 kg

    € 369,00€ 299,00

    Leden identiek

  • Miniware MDP-P906 Digital Power Supply (300 W)

    Miniware Miniware MDP-P906 Digital Power Supply (300 W)

    De MDP-P906 heeft een ingebouwde ventilator en een maximaal uitgangsvermogen van 300 W, wat toereikend is voor een breed scala aan testbehoeften en toepassingen. Via 2,4 GHz draadloze communicatie kan hij worden aangesloten op de MDP-M01 Smart Digital Monitor module om daarmee een flexibele combinatie van meerdere kanalen van 300 W per kanaal te kunnen realiseren. De MDP-P906 heeft een basis, stabiliteit en betrouwbaarheid die te vergelijken is met een professionele voeding. Hij kan puur stroom leveren én krachtige functies hieraan toevoegen, zoals programmeerbare uitgang, getimede uitgang, getimede regeling, automatische compensatie, boost modus, enz. Dit maakt hem tot een kosteneffectieve, slimme en op maat programmeerbare lineaire DC-voeding. De MDP-P906 heeft een zorgvuldig CNC-gefreesde aluminium behuizing, met verfijnde afwerking, eigentijds, bescheiden en prachtig uiterlijk. Hij wijkt hiermee volledig af van het standaard uiterlijk van een traditionele desktop voeding. Door een stackable modulair ontwerp en de draadloze communicatie kan de MDP-P906 onafhankelijk of onderling gekoppeld worden gebruikt, zowel in de normale werkruimte als bij onderhoud op locatie. De MDP-P906 is een perfecte oplossing voor elektrotechnici, met name servicemonteurs, om bij verschillende situaties en toepassingen de stroom te leveren. Ingebouwde stille ventilator, instant cooling, voor een stabiele en efficiënte output! Slimme lineaire compensatie, constante spanning & constante stroom Positieve en negatieve output, series boost, parallelle stroomverdeling Toepassingen Universele tests en onderwijsexperimenten in R&D laboratoria Onderhoud van digitale producten Eigendomsverificatie en foutdiagnose van apparaten en circuits Noodstroomvoorziening voor modelvliegtuigen en voertuigen Voedingen testen van RF en microgolfcircuits of -modules Kwaliteitscontrole en kwaliteitsinspectie Zuivere voeding voor zeer nauwkeurige digitaal-analoge hybride circuits en Hi-Fi audioapparaten Specificaties Input DC 4.2-30 V / 14 A (Max)QC 3.0/PD2.0, 20 V / 5 A (Max) Uitgang 0-30 V / 0-10 A, 300 W (Max) Conversie efficiëntie 95% Output resolutie 10 mV / 2 mA, tot 1 mV / 1 mA via Display Control module Output nauwkeurigheid 0,03%+5 mV0,05%+2 mV Adjustment rate Load adjustment rate <±0,01%Power adjustment rate <±0,01% Ripple en noise <250 uVrms, 3 mVpp; 2 mArms Transient response <4 uS Beveiligingen Te hoge voedingsspanning, onderspanning, omgekeerd aansluiten, te hoge uitgangsstroom, retourstroom en oververhitting Overig Automatisch afsluiten en naar micro-power modeOndersteuning van USB firmware upgrade Afmetingen 112 x 66 x 20 mm Gewicht 181 g Inbegrepen 1x MDP-P906 digitale voeding 2x uitgangskabel 1x gebruikershandleiding Downloads User Manual v1.1 Firmware v1.32

    € 194,95

    Leden € 175,46

  • Bijna uitverkocht PeakTech 1525 DC Power Supply (16 V, 40 A)

    PeakTech PeakTech 1525 DC Power Supply (16 V, 40 A)

    This high graded Switching Mode Power Supply is designed for a wide range of applications for telecommunications, laboratory and industry. The power efficient circuit designs allow units to have small form factor with low profile and small footprint casing. The intelligent fan speed control program checks the fan at power on and adapts the right speed to ensure a quiet and safe operation of the power supply at different ambient temperatures and power output levels. The dual action (coarse and fine set) control knobs make tuning the voltage and current level ever so smooth, precise and fast, due to the rotary encoder and microprocessor control. Setting the CC current limiting can be done in open circuit at output poles. The three user defined presets of voltage and current limiting levels facilitate quick access to frequently used Volt/Ampere settings. The full remote control functionality offer a wide range of operation possibilities for the industrial and more sophisticated users. High RFI immunity and excellent EMI Over load, Over Temperature and Tracking Over Voltage protections 3 user defined, recallable settings for voltage and current values Full Remote control of voltage and current and output control on and off Isolated ground, Active PFC and high power efficiency, Intelligent fans control from zero to full speed Rotary Encoder Control Knob with coarse and fine tuning Safety: EN 61010-1, EN 60950-1 Accessories: power cable and manual Display 3-digit 15 mm green LED-display Output voltage 1 ~ 16 V DC adjustable Output current 40 A / 5 A (main output (rear panel) / front output) Output power 640 W Residual ripple 5 mV rms Efficiency > 85,5 % Operation voltage 200 ~ 240 V AC; 50/60 Hz Dimension (WxHxD) 200 x 90 x 255 mm Weight 2.6 kg

    € 349,00

    Leden € 314,10

  • Connex SMPS800RE Switched-mode Power Supply (230 V, ±40 V)

    Connex SMPS800RE Switched-mode Power Supply (230 V, ±40 V)

    De SMPS800RE Switched-mode Power Supply (SMPS) heeft een differentiële uitgangsspanning en twee extra afzonderlijke regelbare spanningen. Hij is speciaal ontworpen om te worden gebruikt met zowel single-ended als BTL-uitgangsklasse AB, H, D of T audioversterkers. De SMPS800RE maakt gebruik van de meest recente high efficiency LLC Series Resonant Converter Topology. Door gebruik te maken van soft-switched topologie heeft de SMPS800RE een zeer lage EMI-ruis, lagere verliezen, en is compacter dan een klassiek hard-switched SMPS met vergelijkbaar vermogen. Kenmerken LLC Series Resonant Converter Topology voor hoog rendement, tot 95,2% en laagste EMI 230 V AC (200-250 V) AC compatibel 800 W continu uitgangsvermogen met koeling, 1000 W piek uitgangsvermogen, 1150 W kortdurend piekvermogen Volledige beveiliging: onderspanning, overspanning, overstroom en overtemperatuur Burst-Mode gebruik bij lage belasting, of onbelast, voor hoog rendement, met minder dan 3 W verbruik Ingebouwde Soft Start voor naadloos inschakelen zonder stroompieken of breaker tripping Ingebouwde ventilatorregeling met variabel toerental, met optioneel een ventilator, en uitschakeling bij overtemperatuur IEC connector voor netspanning, en aansluitingen voor de uitgangsspanningen, LED-lampje voor Power ON Specificaties Netspanning 230 V Uitgangsspanning ±40 V Aux Uitgangsspanning ±12 V Uitgangsvermogen 800 W Ventilator Nee Afmetingen 150 x 100 x 42 mm Gewicht 0,78 kg Downloads Datasheet

    € 174,95

    Leden € 157,46

  • PeakTech 6226 Laboratory Switching Mode Power Supply DC (0-30 V, 0-10 A)

    PeakTech PeakTech 6226 Laboratory Switching Mode Power Supply DC (0-30 V, 0-10 A)

    Blue LED display to show the output voltage - and current values Adjustable voltage range: 0 ~ 30 V; Current range: 0 ~ 10 A Voltage and current pre-selection with switchable output C.C. (Constant Current) and C.V. (Constant Voltage) mode with connected load Protection against short circuit, overload and overtemperature Automatic shutdown at short circuit as protection Safety: EN 61010-1 Accessories: Power cable and manual Output Voltage 0 V ~ 30 V DC Output Current 0 A ~ 10 A DC Output Power 300 W Display Voltage 10 mV (0 to 30V) Display Current 1 mA (0 A to 9.9 A) ; 10 mA (from 10 A) Ripple & noise ≤ 10 mV RMS; ; ≤ 10 mA RMS Load regulation ≤ 0.02% + 5 mV Line regulation ≤ 0.02% + 10 mV Display accuracy +/- 0.5% + 5 dgt. Protection Overload, overtemperature, short circuit protections by constant current circuitry and output overvoltage Operating voltage 115 / 240 V AC; 50 / 60 Hz Dimensions 80 x 160 x 260 mm Weight 1.6 kg For more information, check out the User Manual here.

    € 149,95

    Leden € 134,96

  • PeakTech 6225 A DC Power Supply (30 V, 5 A)

    PeakTech PeakTech 6225 A DC Power Supply (30 V, 5 A)

    This switching mode power supply is ideal of its very handy shape and low weight for applications in the development and education area. The high visibility of the display, the easy operation and low weight, as well as the slim design are excellent conditions for use in education and service area. Blue LED display to show the output voltage – and current values High effiency >85% Low ripple & noise Protection against short circuit, overload and over-temperature Adjustable voltage range: 0 ~ 30 V Safety: EN 61010-1 Accessories: Power cable and manual Technical Specifications Output voltage (fixed) 0 ~ 30 V DC Output current 0 ~ 5 A DC Ripple & noise ≤ 3 mV RMS; ; ≤ 3 mA RMS Load regulation ≤ 0.01% + 5 mV Line regulation ≤ 0.01% + 1 mV Display accuracy +/- 0,1% + 2 dgt. Protection Overload, overtemperature, short circuit protections by constant current circuitry and output overvoltage Operating voltage 110 ~ 240 V AC; 50/60 Hz Dimensions (WxHxD) 78 x 160 x 255 mm Weight 2.6 kg

    € 89,95

    Leden € 80,96

  • Bijna uitverkocht PeakTech 6227 DC Switching Power Supply (0-60 V, 0-6 A) with colour LCD & 2x USB

    PeakTech PeakTech 6227 DC Switching Power Supply (0-60 V, 0-6 A) with colour LCD & 2x USB

    This laboratory power supply offers a controllable 0...60 V or 0...6 A DC main output with a maximum continuous power of 150 W. For developers, this laboratory power supply offers two switchable USB outputs with their own LCD display with voltage and current values.If you use a load up to 2.5 A, you can set the output voltage up to 60 V. If you want to use a higher current up to 6 A, set the load to a maximum of 25 V. Of course, all stages are also adjustable in between, e.g. 30 V/5 A, 40 V/3.7 A or 50 V/3 A.The current and voltage setting also can be done when the output is switched off. By pressing the knob for current or voltage, the setting resolution can be fine/coarse switched from 1 mA to 100 mA or 10 mV to 1 V.Due to the high range of functions and the simple operation with the best price-performance ratio, this laboratory power supply is ideal for the education, hobby, development and service sector. Blue LCD display showing the output voltage and current values Green LCD display showing the USB output voltage and current values 150 W constant output power Adjustable voltage range: 0~60 V at 0~2.5 A and 0~25 V at 2.5~6 A Voltage and current pre-selection with switchable output C.C. (Constant Current) and C.V. (Constant Voltage) mode with connected load Protection against short circuit, overload and overtemperature Accessories: Power cable, Connection Leads and Manual Output Voltage 0 ~ 60 V DC (@2,5 A) Output Current 0 ~ 6 A DC (@ 25 V) Output Power 150 W Display Resolution (V) 10 mV Display Resolution (A) 1 mA Setting Resolution (V) 10 mV / 1 V switchable Setting Resolution (A) 1 mA / 100 mA switchable Ripple & noise ≤ 5 mV RMS; ≤ 20 mA RMS Load regulation ≤ 0.05% + 5 mV, ≤ 0.5% + 5 mA Line regulation ≤ 0.1% + 3 mV, ≤ 0.2% + 3 mA Display accuracy +/- 0,5% + 5 dgt. Protection Overload, overtemperature, short circuit Operating voltage 115 / 240 V AC; 50/60 Hz Dimensions (WxHxD) 80 x 160 x 260 mm Weight 1.6 kg

    € 129,95

    Leden € 116,96

  • Bijna uitverkocht Siglent SPD3303X DC Power Supply

    Siglent Siglent SPD3303X DC Power Supply

    Deze SPD3000X Series Linear Programmable DC Power Supply heeft een 4,3-inch TFT LCD-scherm, is te programmeren en heeft Real Time Wave Display, wat gebruikers een geheel nieuwe ervaring geeft. Hij heeft drie aparte uitgangen: twee regelbare uitgangen, en een instelbare uitgang van 2,5V, 3,3V en 5V. Hij heeft ook beveiligingsfuncties tegen kortsluiting en overbelasting, en kan goed worden ingezet bij productie en ontwikkeling. 3 onafhankelijk instelbare en apart uitgevoerde uitgangen: 32V/3,2A×2, 2,5V/3,3V/5V/3,2A×1, totaal 220W. 5 digit spannings- en 4 digit stroomweergave, minimale resolutie: 1mV/1mA. Ondersteunt panel timing uitgangsfuncties. 4,3-inch true color TFT LCD-scherm, 480 x 272 pixels. 3 soorten uitgangsmodi: onafhankelijk, serie, parallel. 100V/120V/220V/230V compatibel ontwerp, om te kunnen worden aangesloten op verschillende elektriciteitsnetten. Intelligente temperatuur-gestuurde ventilator, waardoor het geluid effectief verminderd wordt. Duidelijke grafische interface, met golfvorm weergave functie. Intern 5 groepen van systeemparameters op te slaan / op te vragen, ondersteuning voor uitbreiding van de data opslagruimte. Met PC-software: Easypower, ondersteunt SCPI, LabVIEW driver. Uitgangen met hoge resolutie en hoge precisie De hoge resolutie van 1mV/1mA zorgt voor een uitstekende instel- en afleesnauwkeurigheid. Dit zorgt voor een zeer precieze uitvoer, zelfs bij zeer kleine veranderingen in spanning of stroom. Dit zou onmogelijk zijn bij een voeding met een lage resolutie. Serie/parallel/onafhankelijke uitgang De serie- en parallelfunctie maakt het mogelijk om twee kanalen te combineren in één uitgang met meer uitgangsvermogen, waardoor het aantal toepassingen kan worden uitgebreid. Elk van de 3 kanalen kan onafhankelijk worden in- of uitgeschakeld, of ze kunnen allemaal tegelijk worden in- of uitgeschakeld. Paneel geeft de output timing weer Via het bedieningspaneel kunnen 5 groepen timing-instellingen en de output controle worden weergegeven, wat gebruikers een eenvoudige power-programmeer functie geeft. Er kan ook een verbinding worden gemaakt met Siglent's EasyPower PC-software, die een volledig scala aan communicatie- en besturingsopties biedt. Instelparameters opslaan/opvragen De programmeerbare voeding van de SPD3000X-serie kan 5 groepen instellingsparameters in de interne opslag opslaan of hieruit opvragen, en ondersteunt tevens uitbreiding van externe opslag. U kunt daarmee eenvoudig de benodigde instellingen opvragen.

    € 649,00

    Leden € 584,10

  • Envox EEZ Bench Box 3 (BB3) 2-ch – Modular Test & Measurement Solution

    Envox Envox EEZ Bench Box 3 (BB3) 2-ch - Modular Test & Measurement Solution

    Need a modular, open and hackable test and measurement chassis? The two-channel Envox EEZ Bench Box 3 (BB3) includes two DCP405 advanced DC power modules (max. power 310 W). It is a great solution for product development, debugging, and circuit testing.Features Modular design – use up to three modules in any combination 4.3' TFT color touchscreen display with customizable and responsive GUI Four types of power outputs coupling under firmware control (incl. in series for max. 80 V and parallel for max. 10 A) Max. output power: 310 W Multiple output values views including YT-view for DCP405 modules Programmable lists Tracking mode OVP, OCP, OPP and OTP protection Speed controlled cooling fan SCPI programming via USB or Ethernet MicroPython scripting, Node-RED integration RTC with NTP synchronization MQTT support Easily programmable with 400+ SCPI commands Built-in Ethernet, USB and UART for remote control Build-in removable 8 GB micro SD card for data logging and programming Fast boot, FreeRTOS firmware Quiet operation thanks to multi-sensor fan speed control Software simulator Quick and easy upgrade of the DIB module’s firmware Easy maintenance, disassembling and repair Typical Applications Product development and debugging Laboratories and educational facilities Quality control and assessment Automobile electronic circuit testing Production automation testing Device or circuit characteristic verification and troubleshooting Technical Specifications STM32F769 32-bit ARM Cortex-M7 MCU, 216 MHz, 2 MB Flash, 512 KB SRAM Digital I/O: 2x buffered inputs and 2x buffered outputs (alternative functions: UART, PWM out) Rotary encoder with switch 1x user switch 3x dedicated SPI channels (2x Chip selects per channel), 40-pin IDC connector (DIB v1.0) Battery backup (CR2032 button cell type) USB FS OTG Ethernet PHY (10/100 Mbit/s) 32 KB I²C system EEPROM 8 MB SDRAM 8 GB Micro SD card 4.3' TFT color resistive touchscreen display with brightness control SWG/JTAG connector (optional) Small on-board speaker Four power relays for various power outputs coupling Full range autoswitch AC input (115 / 230 Vac) AC Soft-start (In-rush current limitation) and stand-by AC IEC C14 inlet with two 20 x 5 mm fuse AC power switch AC power input protection and EMI filter Standby LED indicator Ø80 mm DC cooling fan with speed control Kensington lock slot™ Compact size: 290 (W) x 123 (H) x 240 (D) mm Weight (populated with 2x DCP405 and 1x DCM224): 4.05 kg

    € 799,00

    Leden € 719,10

  • Bijna uitverkocht PeakTech 2240 AC Power Source (230 V, 500 W)

    PeakTech PeakTech 2240 AC Power Source (230 V, 500 W)

    Under consideration of the high safety requirements in the service centers, schools and industry, it is absolutely necessary to use an AC isolation transformer. This AC power source is provided with a galvanic isolation between primary and secondary voltage for measuring and servicing of open instruments granting a high safety standard. Accessories: power cable, fuse and manual Input voltage 230 V AC ~ 50/60 Hz Output voltage 230 V AC ~ 50/60 Hz Output power / continous current 500 W / 2.5 A Protection class I (case connected to PE) Dimensions (WxHxD) 160 x 125 x 235 mm Weight 7.5 kg

    € 249,00

    Leden € 224,10

  • Miniware MDP-M01 Smart Digital Monitor

    Miniware Miniware MDP-M01 Smart Digital Monitor

    De MDP-M01 is een display control module uitgerust met een 2,8-inch TFT-scherm. Het scherm kan 90 graden worden gedraaid, wat voor gebruikers handig is om gegevens en golfvormen goed te kunnen bekijken. De MDP-M01 is geschikt voor het online monitoren en beheren van MDP-P906 mini digitale voedingsmodules en andere modules van het MDP-systeem via 2,4 GHz draadloze communicatie, en kan tot 6 submodules tegelijkertijd beheren. Specificaties Schermgrootte 2,8' TFT Schermresolutie 240 x 320 cm Voeding Micro USB voedingsingang, of voeding uit een submodule via speciale voedingskabel Voedingsspanning DC 5 V / 0,3 A Andere functies Kan tot 6 submodules beherenUpgrade firmware via Micro USB Afmetingen 107 x 66 x 13,6 mm Gewicht 133 g Inbegrepen 1x MDP-M01 Smart Digital Monitor 1x kabeltje (2.5 mm jack naar Micro USB) Downloads User Manual v3.4 Firmware v1.32

    € 84,95

    Leden € 76,46

  • Hypex SMPS400A400 Power Supply (400 W)

    Hypex Hypex SMPS400A400 Power Supply (400 W)

    The SMPS400 Power Supply is a 400 W high efficiency switch mode power supply specially designed to be used in combination with our range of UcD amplifier modules. This model is made for the UcD400 modules. Also available for the UcD180. Attention: Order cable set and spacers separately! Specifications Applications Supply for single or multiple amplifiers of the UcD range Active loudspeakers Highlights High efficiency Selectable input voltage range Extremely small form factor Low EMIl General features Advanced over current protection Remote controlled operation Low weight Compact Fits in 1HE (additional insulation required) Fixed output voltage (3 versions available) Electrical features High Line Input Voltage: 190-250 VAC Low Line Input Voltage: 95-130 VAC Output Voltage: 2x64 VDC Max. Output power: 600 W Max. Output power: 400 W @ 20 Hz Switching Frequency: 100 kHz Mechanical features Weight: 300 g Dimensions: 105 x 100 x 42 (37) mm

    € 124,95

    Leden € 112,46

  • Envox EEZ Bench Box 3 (BB3) 4-ch – Modular Test & Measurement Solution

    Envox Envox EEZ Bench Box 3 (BB3) 4-ch - Modular Test & Measurement Solution

    Need a modular, open and hackable test and measurement chassis? The four-channel Envox EEZ Bench Box 3 (BB3) includes includes two DCP405 advanced DC power modules and one DCM224 dual output supplementary DC power module (max. output power 465 W). It is a great solution for product development, debugging, and circuit testing.Features Modular design – use up to three modules in any combination 4.3' TFT color touchscreen display with customizable and responsive GUI Four types of power outputs coupling under firmware control (incl. in series for max. 80 V and parallel for max. 10 A) Max. output power: 465 W Multiple output values views including YT-view for DCP405 modules Programmable lists Tracking mode OVP, OCP, OPP and OTP protection Speed controlled cooling fan SCPI programming via USB or Ethernet MicroPython scripting, Node-RED integration RTC with NTP synchronization MQTT support Easily programmable with 400+ SCPI commands Built-in Ethernet, USB and UART for remote control Build-in removable 8 GB micro SD card for data logging and programming Fast boot, FreeRTOS firmware Quiet operation thanks to multi-sensor fan speed control Software simulator Quick and easy upgrade of the DIB module’s firmware Easy maintenance, disassembling and repair Typical Applications Product development and debugging Laboratories and educational facilities Quality control and assessment Automobile electronic circuit testing Production automation testing Device or circuit characteristic verification and troubleshooting Technical Specifications STM32F769 32-bit ARM Cortex-M7 MCU, 216 MHz, 2 MB Flash, 512 KB SRAM Digital I/O: 2x buffered inputs and 2x buffered outputs (alternative functions: UART, PWM out) Rotary encoder with switch 1x user switch 3x dedicated SPI channels (2x Chip selects per channel), 40-pin IDC connector (DIB v1.0) Battery backup (CR2032 button cell type) USB FS OTG Ethernet PHY (10/100 Mbit/s) 32 KB I²C system EEPROM 8 MB SDRAM 8 GB Micro SD card 4.3' TFT color resistive touchscreen display with brightness control SWG/JTAG connector (optional) Small on-board speaker Four power relays for various power outputs coupling Full range autoswitch AC input (115 / 230 Vac) AC Soft-start (In-rush current limitation) and stand-by AC IEC C14 inlet with two 20 x 5 mm fuse AC power switch AC power input protection and EMI filter Standby LED indicator Ø80 mm DC cooling fan with speed control Kensington lock slot™ Compact size: 290 (W) x 123 (H) x 240 (D) mm Weight (populated with 2x DCP405 and 1x DCM224): 4.05 kg

    € 899,00

    Leden € 809,10

  • JOY-iT RD6006 Labvoeding Bundel (360 W)

    JOY-iT JOY-iT RD6006 Labvoeding Bundel (360 W)

    2 reviews

    De JT-RD6006 is een buck DC/DC converter gelijkspanningsvoeding die in verschillende bedrijfsmodi gebruikt kan worden (b.v. constante stroom of constante spanning, enz.). Dankzij het toetsenbord en een druk- en draai-encoder is de bediening van de voedingseenheid heel comfortabel. Bovendien kun je met het toetsenbord gemakkelijk tot negen instellingen opslaan en opnieuw laden. Het 2,4 inch kleurenscherm met hoge resolutie geeft alle belangrijke informatie duidelijk weer. Dankzij de USB interface en een optionele draadloze netwerkinterface kan het apparaat via een PC of met een app vanaf mobiele toestellen bediend worden. Het toestel heeft ook diverse beveiligings- en begrenzingsfuncties zoals bijvoorbeeld constante spanning, constante stroom bedrijfsmodus of overspannings- en overstroombeveiliging en schakelbare zekeringen op de printplaat (achterkant). Specificaties Ingangsspanning 6 - 70 V Uitgangsspanning 0 - 60 V Uitgangsstroom 0 - 6 A Uitgangsvermogen 0 - 360 W Resolutie voor spanning 0.01 V Resolutie voor stroom 0.001 A Meetbereik capaciteit 0 - 9999.99 Ah Meetbereik energie 0 - 9999.99 Wh Resterende rimpelspanning 100 mV(pp) (bij maximale capaciteit) Display 2.4 Inch LCD Bedrijfstemperatuurbereik -10 to 40 °C Afmetingen 167 x 81 x 65 mm Afmetingen 607 g Downloads Datasheet JT-RD6006 Manual JT-RD6006 PC Software Windows driver Mac driver Linux driver

    € 199,95

    Leden € 179,96

  • Bijna uitverkocht Siglent SPD3303X-E DC Power Supply

    Siglent Siglent SPD3303X-E DC Power Supply

    SPD3000X Series Linear Programmable DC Power Supply has a 4.3 inches TFT LCD display, Supports Programmability and Real Time Wave Display, bringing a new experience to users. It has three isolated outputs: two adjustable channels and one selectable channel from 2.5V, 3.3V, and 5V. It also has output short and overload protect function, and can be used in production and development. 3 independent controlled and isolated output, 32V/3.2A×2, 2.5V/3.3V/5V/3.2A×1, total 220W. 5 digits Voltage, 4digits Current Display, Minimum Resolution: 1mV/1mA. Supports panel timing output functions. 4.3 inch true color TFT LCD 480x272 pixel display. 3 kinds of output modes: independent, series, parallel. 100V/120V/220V/230V compatible design to meet the needs of different power grids. Intelligent temperature-controlled fan, effectively reducing noise. Clear graphical interface, with the waveform display function Internal 5 groups of system parameter save/recall, supports data storage space expansion. Provides PC software: Easypower, supports SCPI, LabVIEW driver. High-resolution and high-precision outputThe highest resolution of 1mV/1mA, provides excellent setting and read back accuracy. This ensures accurate output even with very with small changes in voltage or current. This is impossible for a low resolution power supply. Series/parallel/independent mode functionSeries and parallel function allows two channels combined into one output with more power output capability, extending the application range. Each of 3 channels power can be turned on or off independently and also can be turned all on or all off. Panel displays the timing outputThrough the panel operation, 5 groups of timing settings and output control can be displayed, which provides users a simple power programming function. Also a connection can be made with Siglent’s EasyPower PC software providing a full range of communication and control requirements. Save/Recall setting parametersSPD3000X series programmable power supply can save or recall 5 groups of setting parameter in internal storage, also supports external storage expansion. You can easily obtain the settings you needed.

    € 449,00

    Leden € 404,10

  • Sale -10%Bijna uitverkocht Qoitech Otii Arc – Power Supply, Power Meter and Data Acquisition

    Qoitech Otii Arc - Power Supply, Power Meter and Data Acquisition

    Otii Arc is the ultimate developer tool for designing highly energy-efficient devices. It is an easy-to-use, all-in-one, featured-packed tool for every developer's table.It records currents and voltages and displays them in real-time as charts and interactive measurements for analysis and comparisons. Recordings can be synchronized with UART debug logs, giving insights into what drains the energy.Otii Arc is compact, portable, and powered via USB from your laptop (DC supply is optional). It comes with a lifetime subscription of Otii software (standard version), a powerful and easy-to-use desktop application for Ubuntu, Windows & macOS, download here. Channels 10 Sampling Rate 4 kSa/s Main Current (<19.5mA) 1 kSa/s other channels Power Supply Voltage 5 V USB optional 7 V - 9 V DC, up to 5 A Power Consumption < 1 W Operating Temperature 15 °C – 25 °C Storage Temperature -20 °C - 60 °C Cooling Method Convection Dimensions 145 mm x 110 mm x 50 mm Weight 500 g Maximum Measurement Length No limits Testing Modes Main Voltage, Main Current, ADC Voltage, ADC Current, Sense+ Voltage, Sense- Voltage, GPI1 level, GPI2 level, UART RX, UART TX Maximum Output Voltage 3.75 V (USB supply, auto range) 4.20 V (USB supply, high range) 4.55 V (DC supply, auto range) 5.00 V (DC supply, high range) Maximum Output Current 5.0 A peak 2.5 A continuous Maximum Input Voltage 5 V on any pin Maximum Input Current 2.5 A sink capability Range Accuracy Resolution Voltage 5 V ±(0.1% + 1.5 mV) 1 mV Current ±19.5 mA±2.7 A2.7 A - 5.0 A ±(0.1% + 50 nA)±(0.1% + 150 uA)±(1%) 5 nA82 uA1.5 mA For more information, click here.Included Qoitech OTii ARC USB to micro-USB cable

    € 995,00€ 899,00

    Leden identiek

  • Bijna uitverkocht JOY-iT RD6006 DC Power Supply (360 W)

    JOY-iT JOY-iT RD6006 DC Power Supply (360 W)

    De JT-RD6006 is een buck DC/DC converter gelijkspanningsvoeding die in verschillende bedrijfsmodi gebruikt kan worden (b.v. constante stroom of constante spanning, enz.). Dankzij het toetsenbord en een druk- en draai-encoder is de bediening van de voedingseenheid heel comfortabel. Bovendien kun je met het toetsenbord gemakkelijk tot negen instellingen opslaan en opnieuw laden. Het 2,4 inch kleurenscherm met hoge resolutie geeft alle belangrijke informatie duidelijk weer. Dankzij de USB interface en een optionele draadloze netwerkinterface kan het apparaat via een PC of met een app vanaf mobiele toestellen bediend worden. Het toestel heeft ook diverse beveiligings- en begrenzingsfuncties zoals bijvoorbeeld constante spanning, constante stroom bedrijfsmodus of overspannings- en overstroombeveiliging en schakelbare zekeringen op de printplaat (achterkant). Features Functie voor het opladen van batterijen Comfortabele Invoer van waarden via het toetsenbord Instelbare overstroom/overspanningsbeveiliging Specificaties Ingangsspanning 6 - 70 V Uitgangsspanning 0 - 60 V Uitgangsstroom 0 - 6 A Uitgangsvermogen 0 - 360 W Resolutie voor spanning 0.01 V Resolutie voor stroom 0.001 A Meetbereik capaciteit 0 - 9999.99 Ah Meetbereik energie 0 - 9999.99 Wh Resterende rimpelspanning 100 mV(pp) (bij maximale capaciteit) Display 2.4 Inch LCD Bedrijfstemperatuurbereik -10 to 40 °C Afmetingen 167 x 81 x 65 mm Afmetingen 607 g Downloads Datasheet JT-RD6006 Manual JT-RD6006 PC Software Windows driver Mac driver Linux driver

    € 94,95

    Leden € 85,46

  • Seeed Studio Solar Panel for Outdoor Environments (3 W)

    Seeed Studio Seeed Studio Solar Panel for Outdoor Environments (3 W)

    This solar panel is made of single-crystal material that transforms solar energy at an efficiency rate of 17%. Its resin surface and sturdy back make it suitable for outdoor environments. A 2 mm JST connector is attached to the penal, which makes it perfect for teaming up with most boards that support the use of solar power supply. The typical open circuit voltage is around 5 V, depending on light intensity. In bright summer days with a clear sky, the peak open-circuit voltage can rush up to 10 V. To prevent any damage to a connected board that accepts a narrow range of input voltage; you should check whether the open-circuit voltage is safe before any connection. Features Dimensions: 160 x 138 x 2.5 mm Typical voltage: 5.5 V Typical current: 540 mA Open-circuit voltage: 8.2 V Maximum load voltage: 6.4 V

    € 19,95

    Leden € 17,96

Login

Wachtwoord vergeten?

Heb je nog geen account?
Maak gratis een account aan en geniet van vele voordelen.