Platforms

21 producten


  •  -14% Verbeterde T-962 Infrarood reflow-oven (Elektor versie)

    Verbeterde T-962 Infrarood reflow-oven (Elektor versie)

    Niet op voorraad

    Deze verbetere versie (exclusief verkrijgbaar bij Elektor) bevat de volgende verbeteringen: Verbeterde aarding (PE) van het ovenchassis Extra thermische isolatielaag rond de oven om geuren te verminderen De infrarood IC oven T-962 is een microprocessorgestuurde reflow oven die je kunt gebruiken voor het gemakkelijk solderen van diverse SMD en BGA componenten. Het hele soldeerproces kan automatisch worden voltooid en het is heel gemakkelijk in het gebruik. Dit apparaat maakt gebruik van een krachtige infrarood straling en circulatie van de hete luchtstroom, zodat de temperatuur zeer nauwkeurig wordt gehouden en gelijkmatig verdeeld wordt. Een lade met vensters is ontworpen om het werkstuk vast te houden, en maakt een veilige soldeertechniek mogelijk en het manipuleren van SMD & BGA en andere kleine elektronische onderdelen die op een printplaat gemonteerd zijn. De T-962 kan gebruikt worden om soldeer automatisch na te verwarmen om slechte soldeerverbindingen te corrigeren, slechte componenten te verwijderen/vervangen en kleine technische modellen of prototypes te maken. Kenmerken Groot infrarood soldeeroppervlak Effectief soldeergebied: 180 x 235 mm; dit vergroot het gebruik van deze machine drastisch en is daardoor een goede aanschaf. Keuze uit verschillende soldeercycli De parameters van acht soldeercycli zijn vooraf ingesteld en het hele soldeerproces kan automatisch verlopen van voorverwarmen, op temperatuur vloeibaar houden tot afkoelen.. Speciale opwarming en temperatuur egalisatie bij alle versies Gebruikt een energiezuinige infrarood verwarming tot 800 Watt en luchtcirculatie om het soldeer vloeibaar te houden. Ergonomisch ontwerp, praktisch en gemakkelijk te bedienen Door de goede bouwkwaliteit, lichte gewicht en de kleine afmetingen kan de T-962 gemakkelijk op een werkbank worden geplaatst, of worden vervoerd of opgeborgen. Groot aantal functies beschikbaar De T-962 kan de meeste kleine componenten van printplaten solderen, bijvoorbeeld CHIP, SOP, PLCC, QFP, BGA enz. Het is de ideale oplossing voor rework, van eenmalige productie tot kleinschalige productie op bestelling. Specificaties Max. soldeer oppervlak 180 x 235 mm (7,1 x 9,3") Opgenomen vermogen 800 W Proces tijd 1~8 minuten Voeding 220 V AC/60 Hz Afmetingen 31 x 29 x 17 cm (12,2 x 11,4 x 6,7") Gewicht 6,2 kg Downloads Gebruikershandleiding GitHub

    Niet op voorraad

    € 279,00€ 239,00

    Leden identiek

  •  -20% Mendocino Solar Motor Kit

    Mendocino Solar Motor Kit

    Niet op voorraad

    Wanneer je voor het eerst een Mendocino motor ziet kun je niet anders dan hierdoor gefascineerd zijn. Hij zweeft in de lucht en draait vanzelf, schijnbaar zonder enige toevoeging van energie. De functionele werking hiervan is eigenlijk heel simpel. De Mendocino motor is een magnetisch zwevende elektromotor aangedreven door zonne-energie. De zonnepaneeltjes leveren stroom aan de spoelen die op de rotor zijn gemonteerd, waardoor een magnetisch veld wordt gegenereerd. De sterke magneet, die aan het onderstel (het frame) is bevestigd, zorgt ervoor dat het magnetisch veld tot rotatie leidt. Dankzij de unieke magnetische ophanging is er ook bijna geen wrijving. Zorg voor voldoende licht! Hoe sterker de lichtbron, hoe sneller hij draait! Specificaties Rotatiesnelheid 300-1.500 t/min Afmetingen 13,5 x 7 x 7 cm Gewicht ca. 300 g

    Niet op voorraad

    € 49,95€ 39,95

    Leden identiek

  •  -33% Useless Box

    Useless Box

    Wat is dit voor een apparaat? En wat kan je ermee? Tja, dit apparaat vergt nu eenmaal niet veel uitleg. Het meest nutteloze apparaat ter wereld! De Useless box dient letterlijk geen enkel nut heeft, maar is tegelijkertijd wel zo hilarisch is dat je het aan iedereen wilt laten zien. Dit bouwpakket geeft u de mogelijkheid een eigen Useless Box te bouwen en uw technische kennis te vergroten. Uiteindelijk zal dit apparaat zich iedere keer uitschakelen, wanneer het ingeschakeld wordt en heeft het dus een totaal zinloze functie. Nog steeds nieuwsgierig? Kijk dan de video hieronder. Een must-have voor elk kantoor: thuis of op de zaak!

    € 29,95€ 19,95

    Leden identiek

  • BBC micro:bit v2

    BBC micro:bit v2

    Differences between micro:bit v1 and micro:bit v2 The BBC micro:bit v2 is equipped with BLE Bluetooth 5.0 It has a Power off button(push and hold power button) MEMS microphone with a LED indicator Onboard speaker Touch-sensitive logo pin LED power indicator A notched edge connector for easier connections.

    € 24,95

    Leden € 22,46

  • TV-B-Gone Kit – Universal TV Remote

    TV-B-Gone Kit Universal TV Remote

    The TV-B-Gone universal remote control allows you to turn virtually any TV On or OFF. You control when you see TV, rather than what you see. The TV-B-Gone Keychain remote is so small that it easily fits in your pocket so that you have it handy whenever you need it, wherever you go: bars, restaurants, laundromats, ballparks, arenas, etc.The TV-B-Gone Kit is a great way to teach about electronics. When soldered together, it allows you to turn off almost any television within 150 feet or more. It works on over 230 total power codes – 115 American/Asian and another 115 European codes. You can select which zone you want during kit assembly.This is an unassembled kit which means that soldering and assembly is required – but it’s very easy and a great introduction to soldering in general.This kit makes the popular TV-B-Gone remote more fun because you created it yourself with some basic soldering and assembly! Show your friends and family how technologically savvy you are, and entertain them with the power of the TV-B-Gone!The kit is powered by 2x AA batteries and the output comes from 2x narrow beam IR LEDs and 2x wide-beam IR LEDs.IncludedAll required parts/componentsRequiredTools, soldering iron, and batteriesDownloadsGitHub

    € 29,95

    Leden € 26,96

  • Bijna uitverkocht Mendocino Motor AR O-8

    Mendocino Motor AR O-8

    The Mendocino Motor AR O-8 is a magnetically levitated, solar powered electric motor as a kit.Light Becomes MovementThe solar-powered Mendocino motor seems to float in the air. At first glance, you can't see why the rotor is turning at all. This is the magic of the motor.The Lorentz force is a very small electrical force. In a classroom setting, it is detected by a current swing in the magnetic field. With the Mendocino motor, we have succeeded in developing a beautiful application that uses this weak force for propulsion. Due to its concealed base magnet, the motor will fascinate technically inclined observers.In bright sunlight, the motor can reach a speed of up to 1,000 rpm. More impressive, however, is that even the faint glow of an ample tea light (D = 6 cm with a flame height of about 2 cm) is sufficient to drive the motor. The motor is not yet an alternative source of energy, even though it looks tempting. Presumably, it will remain an attractive model until a resourceful mind disproves this assumption.Dimensions All solar cells 65 x 20 mm Mirror diameter: 25 mm Rotor weight: approx. 150 g Model length: 160 mm Model width: 85 mm Frame height: approx. 85 mm Frame material: black acrylic Tube made of highly polished aluminum Mirror color: silver The Mendocino motor’s easy-to-follow instruction manual includes more than 70 illustrations. It describes a safe and practical approach to construction but also gives you the freedom to try your solutions.Partly Pre-Assembled KitA portion of the kit comes pre-assembled. Bonding the borosilicate glass pane to the acrylic surface requires specialized knowledge and aids. We do not want to impose this on the hobbyist. For instance, the base magnet is attached to the aluminum tube.As a hobbyist, you will need some know-how and appropriate tools: carpet knife, soldering iron and tin, hot glue, pliers, and a clamp or ferrule to fix the supplied assembly aid. A lot of fun is guaranteed!

    € 164,95

    Leden € 148,46

  •  -10% 6-cijferige Nixie klok met IN-14 buizen

    6-cijferige Nixie klok met IN-14 buizen

    Niet op voorraad

    Features Fully assembled and tested Nixie clock Six tested IN-14 Nixie tubes mounted to the clock base Two neon colon tubes installed into the clock base 12 V DC power adapter IR remote control Built-in proximity sensor User manual This clock is a combination of modern technologies and vintage Nixie tubes. It is a perfect gift for your friend and definitely will fit into any interior. Warm glowing of the neon will fill your house with soft orange light at night and will serve as a night light. The clock is built with 6 numeric IN-14 Nixie tubes. A built-in RGB LED backlight (with 10 levels for each channel) allow you to set your favorite color. Time accuracy is provided with built-in RTC (Real Time Clock DS3231) module and backuped with CR2032 battery while the clock is powered off. At the end of each minute (could be configured to be set from 1-5 minutes period or completely disabled) starts 'Slot Machine' feature that helps to prevent cathode poisoning effect. It scrolls over all numbers from 0 to 9. It is necessary to prolong tubes lifespan. Current date is shown each 1-5-th minute in 3 various formats: DD:MM:YY, MM:DD:YY or YY:MM:DD. The current time could be configured to 12 or 24 hour format. There are also three modes for colon tubes: Blinks once a second (is set as a default option) Permanently OFF Permanently ON The clock could be set to beep once an hour (when hour starts). The clock also has an alarm feature. All settings are stored in non-volatile memory (settings are restored after power-offs). Dimensions Height: 20 mm Width: 175 mm Length: 70 mm Tube height: 45 mm

    Niet op voorraad

    € 299,00€ 269,00

    Leden identiek

  • Bijna uitverkocht Naturebytes Wildlife Camera Case for Raspberry Pi

    Naturebytes Wildlife Camera Case for Raspberry Pi

    Weatherproof (certified IP55) Fresnel IR lens to optimize motion detection Mount compatible with all models of Raspberry Pi (all A, B, and Zero models) Easy access to the Raspberry Pi’s internal components and ports Can be secured with a padlock Nylon camera attachment strap for securing outside Rear cable access Fasteners and spacers for attaching electronics No soldering required Rear attachments for modular upgrades Please note, you need to provide a Raspberry Pi.

    € 59,95

    Leden € 53,96

  • Arduboy FX

    Arduboy FX

    Arduboy is a miniture game development system the size of a credit card based on the popular open source Arduino platform. Learn to program/code with lots of tutorials and an active community of developers, develop and share your own games using Arduino software via the USB-Cable. Use your PC/Mac/Linux machine to download over 200 unique games created by members of the Arduboy Community.Features Processor: ATmega32u4 (same as Arduino Leonardo & Micro) Memory: 32 KB Flash, 2.5 KB RAM, 1 KB EEPROM Inputs: 6 Momentary Tactile Buttons Outputs: 128 x 64 1-bit OLED, 4 Ch. Piezo Speaker & Blinky LED Battery: 180 mAh Thin-Film Lithium Polymer Connectivity: Micro-USB 2.0 with built-in HID profile Programming: Arduino IDE, Arduboy Game Loader, GCC & AVRDude Open source gamingAnyone can make games for the Arduboy! Free online tutorials guide you through a step by step process on how to develop your own software! There are already plenty of examples to learn from. Ever wanted to create a level or map for your favorite game, or make your favorite character jump higher? Now is your chance!Super retroDesigned to remind you of a more simple time in the world of gaming, the Arduboy brings true 8-bit gaming into the 21st century with style. The black and white screen invites you to involve your imagination once again while gaming.Durable constructionA polycarbonate front, ultra thin circuit board, and stamped aluminum metal back is the ultimate combination. A rechargeable lithium polymer battery provides over 8 hours of battery life, and the same cable you use to charge can be used to upload new games! At only 5 mm thick, Arduboy can live in your pocket (or even wallet) and is thinner than nearly any mobile phone!Downloads Schematics GitHub Documentation

    € 74,95

    Leden € 67,46

  • Bijna uitverkocht HuskyLens AI Camera met Silicone Case

    HuskyLens AI Camera

    Heeft u een eenvoudige AI-camera nodig om uw projecten te verbeteren?  Het intuïtieve ontwerp van de HuskyLens AI-camera stelt de gebruiker in staat om verschillende aspecten van de camera te bedienen door gewoon op knoppen te drukken. U kunt het leren van nieuwe objecten starten en stoppen en zelfs schakelen tussen algoritmes vanaf het apparaat. Om de noodzaak van aansluiting op een pc verder te verminderen, wordt de HuskyLens AI Camera geleverd met een 2-inch display, zodat u in realtime kunt zien wat er gaande is. Specificaties Processor: Kendryte K210 Beeldsensor: OV2640 (2.0 Megapixel Camera) Voedingsspanning: 3,3~5,0 V Stroomverbruik (TYP): 320 mA bij 3,3 V, 230 mA bij 5,0 V (gezichtsherkenningsmodus; 80% helderheid achtergrondverlichting; vullicht uit) Aansluitingsinterface: UART, I²C Display: 2,0-inch IPS-scherm met 320x240 resolutie Ingebouwde algoritmen: Gezichtsherkenning, Object Tracking, Object Recognition, Line Tracking, Kleurherkenning, Tag Recognition Afmeting: 52 x 44,5 mm Inbegrepen 1x HuskyLens moederbord 1x M3 Schroeven 1x M3 Moeren 1x Kleine montagebeugel 1x Verhoogingsbeugel 1x Zwaartekracht 4-Pin Sensor Kabel

    € 89,95

    Leden € 80,96

  • Short Circuits: The 4-Pack (Arduino-compatible Electronics Platform)

    Short Circuits: The 4-Pack (Arduino-compatible Electronics Platform)

    Get started with microcontroller based electronicsThis Arduino-compatible bundle contains the Motherboard, Digitiser, Sensor Array and RGB Matrix. With these 4 boards you have everything you need to build a clock, score counter, timer, task reminder, thermometer, humidity display, sound meter, light meter, clap trigger, colored bar graph display, animated alarm, and much more! The Motherboard has a built in real time clock module that keeps time even when unplugged. The Digitiser can display 4 digits or characters and includes 2 buttons and a potentiometer to let you control what’s being displayed, or the brightness of the display. The Sensor Array can read temperature, relative humidity, sound and light, with an SD card slot for data recording. The RGB Matrix has 16 RGB LEDs that are controlled through shift registers, so only use 3 or 4 pins of the Motherboard. MotherboardThe Motherboard is an Arduino-compatible microcontroller breakout board designed around the ATmega328P. The board comes in a solder-it-yourself kit with all the components you need to get started with microcontroller based electronics. All other boards connect to this. Based on the ATmega328P Arduino compatible On-Board RTC (Real Time Clock) FTDI Header for easy programming Bluetooth Header Terminal Block Connections DigitiserThe Digitiser is a versatile display and input board. It let’s you visualise your data. Show your sensor information, clock digits, or even keep score for your favourite card game. The Digitiser also includes some buttons and a knob to let you take control. 4x 7-Segment Displays Uses 595 Shift Registers 2 Switches and a Potentiometer 4 colored 'Mode' LEDs Chainable with other 595 Boards Terminal Block Connections Sensor ArrayAs the name suggests, the Sensor Array is an array of sensors. Measure temperature and relative humidity via the DHT11, light via the light dependant resistor, and sound via the microphone and amplifier circuit. Then you can log the data using the on-board SD card slot. DHT11 Temp & Humidity Sensor Microphone and Amplifier Circuit Light Dependent Resistor MicroSD Slot for Saving Data Logic Level Converter Circuit Terminal Block Connections RGB MatrixAdd color to your project by controlling 16 red, 16 green and 16 blue LEDs with just 3 pins of your microcontroller. The RGB Matrix uses shift registers, a matrix and switching transistors, so there’s plenty to learn and explore. 4x4 (16) RGB LEDs Uses 595 Shift Registers Chainable with other 595 Boards Transistor Switches Terminal Block Connections Downloads (Manuals) Motherboard Digitiser Sensor Array RGB Matrix

    € 99,95

    Leden € 89,96

  •  -30% Guiding Light

    Guiding Light

    This smart plinth lighting automatically switches on and off when you get up at night. The motion sensor sees you get out of bed and the light turns on! There is an illuminated path from bed to toilet. Obstacles on the way to the toilet are immediately visible and tripping hazards are prevented. Scientific research shows that the fear of falling is significantly reduced when using a Guide Light. The LED lighting has a perfect light intensity. The light is subtle enough not to wake you up, but bright enough for a reliable orientation. The Guiding Light is much more than just a night light.

    € 99,95€ 69,95

    Leden identiek

  • FeeTech FS90 Micro Servo with Accessories

    FeeTech FS90 Micro Servo with Accessories

    Specifications Size 23.2 x 12.5 x 22 mm Weight 9 g Gear type Plastic Gear (Nylon & POM) Limit angle 120 Bearing No Ball bearings Horn gear spline 20T (4.8 mm) Horn type Plastic, POM Case Nylon & Fiberglass Connector wire 200 mm Motor Metal brush motor Spalsh water resistance No Included 1x FeeTech FS90 Servo 1x Straight single ended servo horn 1x Straight double ended servo horn 1x Winged straight double ended servo horn 1x Four-pointed star servo horn 1x Round servo horn 1x Servo horn screw 2x FS90 servo mounting screws Downloads User Guide

    € 12,95

    Leden € 11,66

  • ROBOTIS TurtleBot3 Burger (incl. Raspberry Pi 4)

    ROBOTIS TurtleBot3 Burger (incl. Raspberry Pi 4)

    Niet op voorraad

    World’s Most Popular ROS PlatformTurtleBot is the most popular open source robot for education and research. The new generation TurtleBot3 is a small, low cost, fully programmable, ROS based mobile robot. It is intended to be used for education, research, hobby and product prototyping.Affordable CostTurtleBot was developed to meet the cost-conscious needs of schools, laboratories and companies. TurtleBot3 is the most affordable robot among the SLAM-able mobile robots equipped with a 360° Laser Distance Sensor LDS-01.Small SizeThe dimension of TurtleBot3 Burger is only 138 x 178 x 192 mm (L x W x H). Its size is about 1/4 of the size of the predecessor. Imagine keeping TurtleBot3 in your backpack and develop your program and test it anywhere you go.ROS StandardThe TurtleBot brand is managed by Open Robotics, which develops and maintains ROS. Nowadays, ROS has become the go-to platform for all the roboticists around the world. TurtleBot can be integrated with existing ROS-based robot components, but TurtleBot3 can be an affordable platform for whom want to get started learning ROS.ExtensibilityTurtleBot3 encourages users to customize its mechanical structure with some alternative options: open source embedded board (as a control board), computer and sensors. TurtleBot3 Burger is a two-wheeled differential drive type platform but it is able to be structurally and mechanically customized in many ways: Cars, Bikes, Trailers and so on. Extend your ideas beyond imagination with various SBC, sensors and motors on a scalable structure.Modular Actuator for Mobile RobotTurtleBot3 is able to get a precise spatial data by using 2 DYNAMIXEL’s in the wheel joints. DYNAMIXEL XM series can be operated by one of 6 operating modes (XL series: 4 operating modes): Velocity control mode for wheels, Torque control mode or Position control mode for joint, etc. DYNAMIXEL can be used even to make a mobile manipulator which is light but can be precisely controlled with velocity, torque and position control. DYNAMIXEL is a core component that makes TurtleBot3 perfect. It is easy to assemble, maintain, replace and reconfigure.Open Control Board for ROSThe control board is open-sourced in hardware wise and in software wise for ROS communication. The open source control board OpenCR1.0 is powerful enough to control not only DYNAMIXEL’s but also ROBOTIS sensors that are frequently being used for basic recognition tasks in cost effective way. Various sensors such as Touch sensor, Infrared sensor, Color sensor and a handful more are available. The OpenCR1.0 has an IMU sensor inside the board so that it can enhance precise control for countless applications. The board has 3.3 V, 5 V, 12 V power supplies to reinforce the available computer device lineups.Strong Sensor LineupsTurtleBot3 Burger uses enhanced 360° LiDAR, 9-Axis Inertial Measurement Unit and precise encoder for your research and development.Open SourceThe hardware, firmware and software of TurtleBot3 are open source which means that users are welcomed to download, modify and share source codes. All components of TurtleBot3 are manufactured with injection molded plastic to achieve low cost, however, the 3D CAD data is also available for 3D printing.Specifications Maximum translational velocity 0.22 m/s Maximum rotational velocity 2.84 rad/s (162.72 deg/s) Maximum payload 15 kg Size (L x W x H) 138 x 178 x 192 mm Weight (+ SBC + Battery + Sensors) 1 kg Threshold of climbing 10 mm or lower Expected operating time 2h 30m Expected charging time 2h 30m SBC (Single Board Computers) Raspberry Pi 4 (2 GB RAM) MCU 32-bit ARM Cortex-M7 with FPU (216 MHz, 462 DMIPS) Actuator XL430-W250 LDS (Laser Distance Sensor) 360 Laser Distance Sensor LDS-01 or LDS-02 IMU Gyroscope 3 AxisAccelerometer 3 Axis Power connectors 3.3 V/800 mA5 V/4 A12 V/1 A Expansion pins GPIO 18 pinsArduino 32 pin Peripheral 3x UART, 1x CAN, 1x SPI, 1x I²C, 5x ADC, 4x 5-pin OLLO DYNAMIXEL ports 3x RS485, 3x TTL Audio Several programmable beep sequences Programmable LEDs 4x User LED Status LEDs 1x Board status LED1x Arduino LED1x Power LED Buttons and Switches 2x Push buttons, 1x Reset button, 2x Dip switch Battery Lithium polymer 11.1 V 1800 mAh / 19.98 Wh 5C PC connection USB Firmware upgrade via USB / via JTAG Power adapter (SMPS) Input: 100-240 VAC 50/60 Hz, 1.5 A @maxOutput: 12 VDC, 5 A Downloads ROS Robot Programming GitHub E-Manual Community

    Niet op voorraad

    € 739,00

    Leden identiek

  • Bijna uitverkocht UFactory uArm Swift Pro

    UFactory uArm Swift Pro

    Nog 1 op voorraad

    The uArm Swift Pro is a high quality robotic arm that can be used in a wide range of applications. The uArm Swift Pro was developed and optimized for use in education, which means that many packages are already available for open source platforms such as ROS. The uArm Swift Pro has a position repeatability of 0.2 mm and is also equipped with a stepper motor and a 12-bit encoder. These are just a few reasons that make the uArm Swift Pro an excellent choice for educational use. Another great feature is the 3D printing kit that converts the uArm Swift Pro into a 3D printer in less than 1 minute. The uArm supports the following development platforms/systems: UFACTORY SDK Arduino Python ROS GRABCAD OpenMV Smartphone App The smartphone app for iOS is already available in the App Store and enables easy control and monitoring of the robotic arm. The app for Android is in development and will be available soon. An example of the Machine Vision The following GIF shows the uArm in combination with the OpenMV Machine Vision Cam M7 and the facial recognition applications that can be implemented in MicroPython. Specifications Degrees of Freedom: 4 Repeatability: Up to 0.2 mm Payload: 500 g Working Range: 50-320 mm Positioning Speed: 100 m/s Position Feedback: 12-bit Encoder Dimensions: 150 x 140 x 281mm Weight: 2.2 kg Included UFactory uArm Swift Pro Body Bluetooth & Vacuum Gripper Downloads Datasheet

    Nog 1 op voorraad

    € 939,00

    Leden identiek

  • Clearpath Robotics TurtleBot 4 Lite

    Clearpath Robotics TurtleBot 4 Lite

    TurtleBot 4 is the next-generation of the world’s most popular open source robotics platform for education and research, offering better computing power, better sensors and a world class user experience at an affordable price point.TurtleBot 4 Lite is equipped with an iRobot Create 3 mobile base, a powerful Raspberry Pi 4 running ROS 2, OAK-D spatial AI stereo camera, 2D LiDAR and more. All components have been seamlessly integrated to deliver an out-of-the-box development and learning platform.Specifications Base platform iRobot Create 3 Wheels (Diameter) 72 mm Ground Clearance 4.5 mm On-board Computer Raspberry Pi 4 (4 GB) Maximum linear velocity 0.31 m/s in safe mode0.46 m/s without safe mode Maximum angular velocity 1.90 rad/s Maximum payload 9 kg Operation time 2h 30m – 4h depending on load Charging time 2h 30m Lidar RPLIDAR A1M8 Camera OAK-D-Lite User Power VBAT @1.9 A5 V @ Low current3.3 V @ Low current USB Expansion 2x USB 2.0 (Type A)2x USB 3.0 (Type A) Programmable LEDs Create 3 Lightring Buttons and Switches 2x Create 3 User buttons1x Create 3 Power Button Battery 26 Wh Lithium Ion (14.4 V nominal) Charging Dock Included Size (L x W x H) 342 x 339 x 192 mm Weight 3.3 kg DownloadsUser Manual

    € 1.599,00

    Leden identiek

  • ROBOTIS TurtleBot3 Waffle Pi (incl. Raspberry Pi 4)

    ROBOTIS TurtleBot3 Waffle Pi (incl. Raspberry Pi 4)

    World’s Most Popular ROS PlatformTurtleBot is the most popular open source robot for education and research. The new generation TurtleBot3 is a small, low cost, fully programmable, ROS based mobile robot. It is intended to be used for education, research, hobby and product prototyping.Affordable CostTurtleBot was developed to meet the cost-conscious needs of schools, laboratories and companies. TurtleBot3 is the most affordable robot among the SLAM-able mobile robots equipped with a 360° Laser Distance Sensor LDS-01.ROS StandardThe TurtleBot brand is managed by Open Robotics, which develops and maintains ROS. Nowadays, ROS has become the go-to platform for all the roboticists around the world. TurtleBot can be integrated with existing ROS-based robot components, but TurtleBot3 can be an affordable platform for whom want to get started learning ROS.ExtensibilityTurtleBot3 encourages users to customize its mechanical structure with some alternative options: open source embedded board (as a control board), computer and sensors. TurtleBot3 Waffle Pi is a two-wheeled differential drive type platform but it is able to be structurally and mechanically customized in many ways: Cars, Bikes, Trailers and so on. Extend your ideas beyond imagination with various SBC, sensors and motors on a scalable structure.Modular Actuator for Mobile RobotTurtleBot3 is able to get a precise spatial data by using 2 DYNAMIXEL’s in the wheel joints. DYNAMIXEL XM series can be operated by one of 6 operating modes (XL series: 4 operating modes): Velocity control mode for wheels, Torque control mode or Position control mode for joint, etc. DYNAMIXEL can be used even to make a mobile manipulator which is light but can be precisely controlled with velocity, torque and position control. DYNAMIXEL is a core component that makes TurtleBot3 perfect. It is easy to assemble, maintain, replace and reconfigure.Open Control Board for ROSThe control board is open-sourced in hardware wise and in software wise for ROS communication. The open source control board OpenCR1.0 is powerful enough to control not only DYNAMIXEL’s but also ROBOTIS sensors that are frequently being used for basic recognition tasks in cost effective way. Various sensors such as Touch sensor, Infrared sensor, Color sensor and a handful more are available. The OpenCR1.0 has an IMU sensor inside the board so that it can enhance precise control for countless applications. The board has 3.3 V, 5 V, 12 V power supplies to reinforce the available computer device lineups.Open SourceThe hardware, firmware and software of TurtleBot3 are open source which means that users are welcomed to download, modify and share source codes. All components of TurtleBot3 are manufactured with injection molded plastic to achieve low cost, however, the 3D CAD data is also available for 3D printing.Specifications Maximum translational velocity 0.26 m/s Maximum rotational velocity 1.82 rad/s (104.27 deg/s) Maximum payload 30 kg Size (L x W x H) 281 x 306 x 141 mm Weight (+ SBC + Battery + Sensors) 1.8 kg Threshold of climbing 10 mm or lower Expected operating time 2h Expected charging time 2h 30m SBC (Single Board Computers) Raspberry Pi 4 (2 GB RAM) MCU 32-bit ARM Cortex-M7 with FPU (216 MHz, 462 DMIPS) Remote Controller RC-100B + BT-410 Set (Bluetooth 4, BLE) Actuator XL430-W210 LDS (Laser Distance Sensor) 360 Laser Distance Sensor LDS-01 or LDS-02 Camera Raspberry Pi Camera Module v2.1 IMU Gyroscope 3 AxisAccelerometer 3 Axis Power connectors 3.3 V/800 mA5 V/4 A12 V/1 A Expansion pins GPIO 18 pinsArduino 32 pin Peripheral 3x UART, 1x CAN, 1x SPI, 1x I²C, 5x ADC, 4x 5-pin OLLO DYNAMIXEL ports 3x RS485, 3x TTL Audio Several programmable beep sequences Programmable LEDs 4x User LED Status LEDs 1x Board status LED1x Arduino LED1x Power LED Buttons and Switches 2x Push buttons, 1x Reset button, 2x Dip switch Battery Lithium polymer 11.1 V 1800 mAh / 19.98 Wh 5C PC connection USB Firmware upgrade via USB / via JTAG Power adapter (SMPS) Input: 100-240 VAC 50/60 Hz, 1.5 A @maxOutput: 12 VDC, 5 A Downloads ROS Robot Programming GitHub E-Manual Community

    € 1.879,00

    Leden identiek

  • Inventables X-Carve V2 CNC Machine (1000 mm fully loaded Kit)

    Inventables X-Carve V2 CNC Machine (1000 mm fully loaded Kit)

    The X-Carve CNC machine is great for Makers looking to start their CNC journey. Reliable, customizable, and expandable: X-Carve is also the best-selling machine for entrepreneurs and small businesses. Start producing, no CNC knowledge required. X-Carve and Easel simplify 3D carving so you can begin working with wood, plastics and other materials in minutes. Features Carves wood, plastics, and materials like aluminum, Corian®️, and linoleum up to 37 inches wide. Easy-to-follow assembly instructions will help familiarize you with your machine. This model V2 is 3x faster, more rigid, and more accurate than the original X-Carve. Design -> Carve -> Sell Design: Sketch out your own idea and upload to Easel software, or browse from the library of over 3 million designs. Carve: Easel controls the spindle and makes calculations so there's no guesswork. Sell: X-Carve + Easel speeds up production so you can take on more jobs and get them out faster. The bundle pays for itself in no time. Carvable Materials Wood/Wood Composites: Hardwoods, softwoods, MDF, plywoods, etc. Plastics: HDPE, Delrin®️, polycarbonate, acrylic, Corian®️, etc. Non-Ferrous Metals: Aluminum, brass, copper, etc. Import File Types: G-Code, SVG, or DXF files from any software Software Compatible with standard g-code and GRBL 1 Year of Easel Pro Included (world’s easiest CAD/CAM software) Size & Weight Work Area: 750 x 750 x 114 mm (29.5 x 29.5 x 4.5') Machine Footprint: 1041 x 1321 x 559 mm (41 x 52 x 22') Maximum Passthrough Sheet Width: 940 mm (37') Finish: Anodized Aluminum Product Weight: 45 kg Shipping Weight: 50 kg Included X-Carve Base & Hardware Rail Kit DeWalt 26200 Spindle X-Controller Kit Nema 23 Motors Kit Waste Board Drag Chain Toolkit Homing Kit Z-Probe Kit Side Board Dust Control System Clamp Set Digital Calipers 1 Year Easel Pro Software Downloads Instructions Support 3D Models and Drawings

    € 3.299,00

    Leden identiek

  • Unitree Quadruped Go1 Air

    Unitree Quadruped Go1 Air

    De Unitree Go1 serie bestaat uit viervoetige robots voor research & development van autonome systemen op het gebied van mens-robot interactie (HRI), SLAM & transport. Door het hebben van vier poten en een 12-DOF houdingscontrole kan deze robot veel verschillende terreinen aan. De Go1 wordt geleverd met een geperfectioneerde aandrijving en power management systeem, wat een snelheid (afhankelijk van de uitvoering) tot 3,7 m/s of 11,88 km/u mogelijk maakt bij een bedrijfstijd van maximaal 2,5 uur. Verder hebben de motoren een koppel van 23,70 Nm op de body/dijen en 35,55 Nm op de knieën, waardoor ook sprongen of backflips mogelijk zijn. Kenmerken High Dynamics 17 km/u Intelligent Side-Follow System (ISS) Super Sensorisch System (SSS) 10-view Detectie AI-detectie, Human Recognition, enz. Flexibele en adaptieve gewrichten Langdurige werking Specificaties Licht en compact Gewicht: 12 kg Afmetingen (ingeklapt): 0,588 x 0,29 x 0,22 m High performance Max snelheid: 4,7 m/s (17 km/u of 10,6 mph) Intelligent Side Follow System (gepatenteerde Wireless Vector Positioning and Control Technology) De robothond kan naast zijn baasje lopen en niet alleen volgen De interactie tussen mens en machine is zowel harmonieus als veilig Super Sensory System Full View Coverage 5 sets fish-eye stereo dieptecamera's + AI-nabewerking + 3 sets hypersonische sensoren Lens openingshoek: 150 x 170° Ingebouwde krachtige AI 16-core CPU + GPU (384 cores, 1,5 TFLOPS) ISS en SSS werken coöperatief samen Robuust en betrouwbaar Power System Nieuwe superlichtgewicht Power Joint met laag geluidsniveau en een lange levensduur Heat Pipe koelsysteem ingebouwd in de motor van het knie gewricht Body/dijen gewrichten: C1-8: 520 g 23,70 N.m Knie gewricht: C1-8 x 1,5 ratio 35,55 N.m Unitree Go1 varianten De Go1 serie heeft 3 varianten (Go1 Air, Go1 Pro en Go1 Edu), die technisch enigszins verschillen. De verschillen betreffen vooral de processoren en de sensor systemen. De Air en Pro variant werken, afhankelijk van het model, met één of 3x (4x 1,43 GHz 128 Cores 0,5 T) processor en met 1 of 5 super sensor systems. Beide varianten zijn uitgerust met 3 ultrasone sensoren. De Go1 Edu-variant heeft tot 3 nano processors, 5 super sensor systems en 4 ultrasone sensoren. De Edu Plus daarentegen is standaard uitgerust met een Nvidia Jetson Xavier NX. Model vergelijking Go1 Air Go1 Pro Go1 Edu Go1 Edu Plus SSS 1 Super Sensing System 1 set 5 sets 5 sets 5 sets Sensing calculatie 1x (4x 1,43 GHz 128 cores 0.5 T) 3x (4x 1,43 GHz 128 cores 0.5 T) 3 Jetson Nano 2 Jetson Nano + 1 NVIDIA Jetson NX ISS 1 Intelligent Concomitant ✓ ✓ ✓ ✓ RTT 1 Pictures Transaction ✓ ✓ ✓ ✓ Oplader 24 V, 4 V 24 V, 6 V 24 V, 6 V 24 V, 6 V Afstandsbediening ✓ ✓ ✓ ✓ Draagvermogen ≈3 kg ≈3 kg ≈5 kg (max ~10 kg) ≈5 kg (max ~10 kg) Heat Pipe ondersteunde warmteafvoer ✓ ✓ ✓ ✓ Bewegingssnelheid 0 ~ 2,5 m/s 0 ~ 3,5 m/s 0 ~ 3,7 m/s (max ~5 m/s) 0 ~ 3,7 m/s (max ~5 m/s) Accu 1x 1x 1x 1x Grafische programming interface ✓ ✓ ✓ ✓ Scientific programming interface ✓ ✓ Python programming interface ✓ ✓ HAI 1 Human Sensing ✓ ✓ APP Top View ✓ ✓ ✓ 4G ✓ ✓ Voeteinde fysieke kracht sensor ✓ ✓ Multifunctionele uitbreidingsinterface voor randapparatuur ✓ ✓ Radar 2D of 3D optioneel 2D of 3D optioneel Inbegrepen 1x Unitree Go1 1x Unitree Go1 Accu 1x Unitree Go1 Oplader 1x Unitree Go1 Afstandsbediening Downloads Handleiding GitHub

    € 4.699,00

    Leden identiek

  • Unitree Quadruped Go1 Pro

    Unitree Quadruped Go1 Pro

    Unitree Go1 series consists of quadruped robots for the research & development of autonomous systems in the fields of human-robot interaction (HRI), SLAM & transportation. Due to the four legs, as well as the 12DOF, this robot can handle a variety of different terrains. The Go1 comes with a perfected drive & power management system, which enables a speed (depending on the version) of up to 3.7 m/s or 11.88 km/h with an operating time of up to 2.5 hours. Furthermore, the motors have a torque of 23.70N.m at the body/thighs and 35.55N.m at the knees, which also allow jumps or backflips. Features High Dynamics 17 km/h Intelligent Side-Follow System (ISS) Super Sensory System (SSS) 10-view Detection AI Detection, Human Recognition, etc. Flexible and adaptive Joints Long Endurance Specifications Light and Compact Weight: 12 kg Size (folded): 0.588 x 0.29 x 0.22 m High Performance Max Speed: 4.7 m/s (17 kmh or 10.6 mph) Intelligent Side Follow System (Adopt Patented Wireless Vector Positioning and Control Technology) Robot dog can walk alongside its owner and not only follow The human-machine interaction is both harmonious and safe Super Sensory System Full View Coverage 5 Sets Fish-Eye Stereo Depth Cameras + AI Post-processing + 3 Sets of Hypersonic Sensors Lens Angle: 150 x 170° Built-in Powerful AI 16-core CPU + GPU (384 Cores, 1.5 TFLOPS) ISS and SSS Function Cooperatively Strong & Reliable Power System New Power Joint with Super Lightweight Low Noise and Long Life Heat Pipe Cooling System Built in the Knee Joint Motor Body/thigh joints: C1-8: 520 g 23.70N.m Knee Joint: C1-8 x 1.5 ratio 35.55N.m Unitree Go1 Variants The Go1 series has 3 variants (Go1 Air, Go1 Pro and Go1 Edu), which differ a little technically. The differences are mainly the processors and sensor systems, the Air and Pro variant works, depending on the model, with one or 3x (4x 1.43 GHz 128 Cores 0.5 T) processor as well as with 1 or 5 super sensor systems. Both variants are equipped with 3 ultrasonic sensors. The Go1 Edu variant has up to 3 nano processors, 5 super sensor systems, and 4 ultrasonic sensors. In contrast, Edu Plus is equipped with an Nvidia Jetson Xavier NX as standard. Model Comparison   Go1 Air Go1 Pro Go1 Edu Go1 Edu Plus SSS 1 Super-sensing system 1 set 5 sets 5 sets 5 sets Sensing calculation 1x (4x 1.43 GHz 128 Cores 0.5 T) 3x (4x 1.43 GHz 128 Cores 0.5 T) 3 Jetson Nano 2 Jetson Nano + 1 NVIDIA Jetson NX ISS 1 Intelligent Concomitant ✓ ✓ ✓ ✓ RTT 1 Pictures Transaction ✓ ✓ ✓ ✓ Charger 24 V, 4 V 24 V, 6 V 24 V, 6 V 24 V, 6 V Remote Control ✓ ✓ ✓ ✓ Load ≈3 kg ≈3 kg ≈5 kg (max ~10 kg) ≈5 kg (max ~10 kg) Heat Pipe Assisted Heat Dissipation ✓ ✓ ✓ ✓ Motion Speed 0~2.5 m/s 0~3.5 m/s 0~3.7 m/s (max ~5 m/s) 0~3.7 m/s (max ~5 m/s) Battery 1x 1x 1x 1x Graphical Programming Interface ✓ ✓ ✓ ✓ Scientific Programming Interface     ✓ ✓ Python Programming Interface     ✓ ✓ HAI 1 Human Sensing     ✓ ✓ APP Top View   ✓ ✓ ✓ 4G     ✓ ✓ Foot-end Physical Force Sensor     ✓ ✓ Multifunctional Peripheral Expansion Interface     ✓ ✓ Radar     2D or 3D optional 2D or 3D optional Included 1x Unitree Go1 1x Unitree Go1 Battery 1x Unitree Go1 Charger 1x Unitree Go1 Remote Controller Downloads User Manual GitHub

    € 6.249,00

    Leden identiek

  • Unitree Quadruped Go1 Edu

    Unitree Quadruped Go1 Edu

    Unitree Go1 series consists of quadruped robots for the research & development of autonomous systems in the fields of human-robot interaction (HRI), SLAM & transportation. Due to the four legs, as well as the 12DOF, this robot can handle a variety of different terrains. The Go1 comes with a perfected drive & power management system, which enables a speed (depending on the version) of up to 3.7 m/s or 11.88 km/h with an operating time of up to 2.5 hours. Furthermore, the motors have a torque of 23.70N.m at the body/thighs and 35.55N.m at the knees, which also allow jumps or backflips. Features High Dynamics 17 km/h Intelligent Side-Follow System (ISS) Super Sensory System (SSS) 10-view Detection AI Detection, Human Recognition, etc. Flexible and adaptive Joints Long Endurance Specifications Light and Compact Weight: 12 kg Size (folded): 0.588 x 0.29 x 0.22 m High Performance Max Speed: 4.7 m/s (17 kmh or 10.6 mph) Intelligent Side Follow System (Adopt Patented Wireless Vector Positioning and Control Technology) Robot dog can walk alongside its owner and not only follow The human-machine interaction is both harmonious and safe Super Sensory System Full View Coverage 5 Sets Fish-Eye Stereo Depth Cameras + AI Post-processing + 3 Sets of Hypersonic Sensors Lens Angle: 150 x 170° Built-in Powerful AI 16-core CPU + GPU (384 Cores, 1.5 TFLOPS) ISS and SSS Function Cooperatively Strong & Reliable Power System New Power Joint with Super Lightweight Low Noise and Long Life Heat Pipe Cooling System Built in the Knee Joint Motor Body/thigh joints: C1-8: 520 g 23.70N.m Knee Joint: C1-8 x 1.5 ratio 35.55N.m Unitree Go1 Variants The Go1 series has 3 variants (Go1 Air, Go1 Pro and Go1 Edu), which differ a little technically. The differences are mainly the processors and sensor systems, the Air and Pro variant works, depending on the model, with one or 3x (4x 1.43 GHz 128 Cores 0.5 T) processor as well as with 1 or 5 super sensor systems. Both variants are equipped with 3 ultrasonic sensors. The Go1 Edu variant has up to 3 nano processors, 5 super sensor systems, and 4 ultrasonic sensors. In contrast, Edu Plus is equipped with an Nvidia Jetson Xavier NX as standard. Model Comparison   Go1 Air Go1 Pro Go1 Edu Go1 Edu Plus SSS 1 Super-sensing system 1 set 5 sets 5 sets 5 sets Sensing calculation 1x (4x 1.43 GHz 128 Cores 0.5 T) 3x (4x 1.43 GHz 128 Cores 0.5 T) 3 Jetson Nano 2 Jetson Nano + 1 NVIDIA Jetson NX ISS 1 Intelligent Concomitant ✓ ✓ ✓ ✓ RTT 1 Pictures Transaction ✓ ✓ ✓ ✓ Charger 24 V, 4 V 24 V, 6 V 24 V, 6 V 24 V, 6 V Remote Control ✓ ✓ ✓ ✓ Load ≈3 kg ≈3 kg ≈5 kg (max ~10 kg) ≈5 kg (max ~10 kg) Heat Pipe Assisted Heat Dissipation ✓ ✓ ✓ ✓ Motion Speed 0~2.5 m/s 0~3.5 m/s 0~3.7 m/s (max ~5 m/s) 0~3.7 m/s (max ~5 m/s) Battery 1x 1x 1x 1x Graphical Programming Interface ✓ ✓ ✓ ✓ Scientific Programming Interface     ✓ ✓ Python Programming Interface     ✓ ✓ HAI 1 Human Sensing     ✓ ✓ APP Top View   ✓ ✓ ✓ 4G     ✓ ✓ Foot-end Physical Force Sensor     ✓ ✓ Multifunctional Peripheral Expansion Interface     ✓ ✓ Radar     2D or 3D optional 2D or 3D optional Included 1x Unitree Go1 1x Unitree Go1 Battery 1x Unitree Go1 Charger 1x Unitree Go1 Remote Controller Downloads User Manual GitHub

    € 12.539,00

    Leden identiek

Deze categorie biedt een breed spectrum aan platformen waaruit u kunt kiezen. Ze hebben allemaal verschillende kenmerken en u kunt het platform kiezen dat het beste bij uw wensen of project past.

Login

Wachtwoord vergeten?

Heb je nog geen account?
Maak gratis een account aan en geniet van vele voordelen.