NIEUW

This AI Edge Computing Development Kit is based on the Jetson Orin Nano Module providing rich peripheral interfaces such as M.2, DP, USB, etc. This kit also comes with a pre-installed AW-CB375NF wireless network card that supports Bluetooth 5.0 and dual-band WIFI, with two additional PCB antennas, for providing high-speed and reliable wireless network connection and Bluetooth communication. Specifications AI performance 40 TOPS GPU 1024-core N-VIDIA Ampere architecture GPU with 32 Tensor Cores GPU frequency 625 MHz (max) CPU 6-core Arm Cortex-A78AE v8.2 64-bit CPU, 1.5 MB L2 + 4 MB L3 CPU frequency 1.5 GHz (max) RAM 8 GB 128-bit LPDDR5, 68 GB/s Storage 128 GB NVMe Solid State Drive Power 7~15 W PCIE M.2 Key M slot with x4 PCIe Gen3 M.2 Key M slot with x2 PCIe Gen3 M.2 Key E slot USB USB Type-A: 4x USB 3.2 Gen2 USB Type-C (UFP) CSI camera 2x MIPI CSI-2 camera connector Video encode 1080p30 supported by 1-2 CPU cores Video decode 1x 4K60 (H.265) 2x 4K30 (H.265) 5x 1080p60 (H.265) 11x 1080p30 (H.265) Display 1x DisplayPort 1.2 (+MST) connector Interfaces 40-Pin Expansion Header (UART, SPI, I²S, I²C, GPIO), 12-pin button header, 4-pin fan header, DC power jack Networking 1x GbE connector Dimensions 103 x 90.5 x 34 mm Included Waveshare Orin Nano development kit 1x Jetson Orin Nano Module (8 GB) 1x JETSON-ORIN-IO-BASE 1x Cooling Fan 1x 128 GB NVMe Solid State Drive (assembled) 1x Wireless network card (assembled) 1x USB Type A to Type-C cable (1 m) 1x Ethernet cable (1.5 m) 1x Jumper 1x Power adapter (EU) Documentation Wiki

Lees meer minder

The Waveshare Jetson Nano Development Kit, based on AI computers Jetson Nano (with 16 GB eMMC) and Jetson Xavier NX, provides almost the same IOs, size, and thickness as the Jetson Nano Developer Kit (B01), more convenient for upgrading the core module. By utilizing the power of the core module, it is qualified for fields like image classification, object detection, segmentation, speech processing, etc., and can be used in sorts of AI projects. Specifications GPU 128-core Maxwell CPU Quad-core ARM A57 @ 1.43 GHz RAM 4 GB 64-bit LPDDR4 25.6 GB/s Storage 16 GB eMMC + 64 GB TF Card Video encoder 250 MP/s 1x 4K @ 30 (HEVC) 2x 1080p @ 60 (HEVC) 4x 1080p @ 30 (HEVC) Video decoder 500 MP/s 1x 4K @ 60 (HEVC) 2x 4K @ 30 (HEVC) 4x 1080p @ 60 (HEVC) 8x 1080p @ 30 (HEVC) Camera 1x MIPI CSI-2 D-PHY lanes Connectivity Gigabit Ethernet, M.2 Key E expansion connector Display HDMI USB 1x USB 3.2 Gen 1 Type A 2x USB 2.0 Type A 1x USB 2.0 Micro-B Interfaces GPIO, I²C, I²S, SPI, UART Dimensions 100 x 80 x 29 mm Included 1x JETSON-NANO-LITE-DEV-KIT (carrier + Nano + heatsink) 1x AC8265 dual-mode NIC 1x Cooling fan 1x USB cable (1.2 m) 1x Ethernet cable (1.5 m) 1x 5 V/3 A power adapter (EU) 1x 64 GB TF Card 1x Card reader Documentation Wiki

Lees meer minder

This 5.83-inch black/white e-paper e-ink display module for Raspberry Pi Pico offers a resolution of 648 × 480 pixels, an SPI interface, low power consumption, wide viewing angle and a paper-like effect without electricity. Features No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing SPI interface, requires minimal I/O pins 2x user buttons and 1x reset button for easy interacting Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specifications Operating voltage 3.3 V Display color Black, white Resolution 648 × 480 pixels Gray scale 2 Interface 3-wire SPI, 4-wire SPI Viewing angle >170° Partial refresh time N/A Full refresh time 5s Outline dimensions 125.4 × 99.5 mm Display size 119.232 × 88.320 mm Refresh power 26.4 mW (typ.) Standby current <0.01 uA (almost none) Dot pitch 0.184 × 0.184 mm Applications Suitable For Price Tags Asset/Equipment Tags Shelf Labels Conference Name Tag Included 1x 5.83-inch e-Paper 1x Pico-ePaper-Driver-Board 1x Standoff pack Downloads Wiki

Lees meer minder

This 5.83-inch 3-color e-paper e-ink display module for Raspberry Pi Pico offers a resolution of 648 × 480 pixels, an SPI interface, low power consumption, wide viewing angle and a paper-like effect without electricity. Features No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing SPI interface, requires minimal I/O pins 2x user buttons and 1x reset button for easy interacting Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specifications Operating voltage 3.3 V Display color Red, black, white Resolution 648 × 480 pixels Gray scale 2 Interface 3-wire SPI, 4-wire SPI Viewing angle >170° Partial refresh time N/A Full refresh time 5s Outline dimensions 125.4 × 99.5 mm Display size 119.232 × 88.320 mm Refresh power 26.4 mW (typ.) Standby current <0.01 uA (almost none) Dot pitch 0.184 × 0.184 mm Applications Suitable For Price Tags Asset/Equipment Tags Shelf Labels Conference Name Tag Included 1x 5.83-inch e-Paper (B) 1x Pico-ePaper-Driver-Board 1x Standoff pack Downloads Wiki

Lees meer minder

This 7.5-inch e-paper E-Ink display HAT for Raspberry Pi with SPI interface provides low power consumption, wide viewing angle and a paper-like display of 3 colors (red, black, white) without electricity. Advantages Of E-Ink E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper. E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect. Features No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40-pin GPIO extension header, supports Raspberry Pi series boards, Jetson Nano SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc. Onboard voltage translator, compatible with 3.3/5 V MCUs Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Specifications Operating voltage 3.3/5 V Interface 3-wire SPI, 4-wire SPI Display size 163.2 x 97.92 mm Dot pitch 0.205 x 0.204 mm Resolution 800 x 480 pixels Display color Red, black, white Viewing angle >170° Gray scale 2 Full refresh time 26s Refresh power 48mW (typ.) Standby current <0.01uA (almost none) Dimensions 170.2 x 111.2 mm Included 1x 7.5-inch e-Paper HAT (B) 1x RPi screws pack (2pcs) 1x GH1.25 9-pin cable (20 cm) Downloads Wiki (Manual)

Lees meer minder

De Solar Power Manager is compatibel met standaard 6 ~ 24 V zonnepanelen. Hij kan de 18650 oplaadbare Li-ion accu’s opladen via een zonnepaneel of een USB-C aansluiting, en biedt een gestabiliseerde uitgang van 5 V / 3 A (met ondersteuning voor meerdere protocollen, waaronder PD/QC/FCP/PE/SFCP).De module beschikt over een MPPT (Maximum Power Point Tracking) functie en meerdere beveiligingscircuits, en werkt daarom veilig en met hoge efficiëntie en stabiliteit. Hij is geschikt voor IoT op zonne-energie, toepassingen op laag vermogen en andere energiezuinige projecten.Kenmerken Ondersteunt MPPT (Maximum Power Point Tracking), waardoor de efficiëntie van het zonnepaneel wordt gemaximaliseerd Flexibel accu’s opladen: van zonnepaneel of USB-C voedingsadapter Compatibel met 6 ~ 24 V zonnepanelen, DC-002 jack ingang of schroefaansluiting Een ingebouwde MPPT SET-schakelaar, waarmee u het niveau selecteert wat het dichtst bij het ingangsniveau ligt om de laadefficiëntie te verbeteren Een ingebouwde aluminium elektrolytische condensator met hoge capaciteit en een SMD keramische condensator, waardoor de rimpelspanning wordt verminderd, en voor een stabiele werking Een ingebouwde accuhouder, geschikt voor 3x 18650 oplaadbare Li-ion accu’s Verschillende led-indicatoren, voor het monitoren van het zonnepaneel en de accu’s Meerdere beveiligingscircuits: over-laden / over-ontladen / bescherming tegen omgekeerd aansluiten / oververhitting / teveel stroom, voor een stabiele werking en veilig gebruik Specificaties Zonnecel ingang 6~24 V (default 18 V) Opladen USB Accu 3x 18650 Li-ion accu’s (NIET inbegrepen) USB-ingang 5 V (USB-C, met PD quick charge ondersteuning) 5 V uitgang 5 V / 3 A (USB-OUT, USB-C) Cutoff spanning bij opladen 4,2 V ±1% Over-ontladen beschermingsspanning 3.0 V ±1% Zonnepaneel oplaad efficiency ~78% USB oplaad efficiency ~93% Accu boost output efficiency ~90% Ruststroom (max) <2 mA Behuizing Metalen behuizing Bedrijfstemperatuur -40°C ~ 85°C Afmetingen 119,0 x 71,0 x 25,2 mm Inbegrepen 1x Solar Power Manager (C) 1x Adapter DownloadsWiki

Lees meer minder

Deze zonne-energie management module is ontworpen voor een 6 ~ 24 V zonnepaneel. Hij kan de 3,7 V oplaadbare Li-accu opladen via een zonnepaneel of USB-aansluiting, en biedt een gestabiliseerde uitgangspanning van 5 V / 1 A of 3,3 V / 1 A.De module beschikt over een MPPT (Maximum Power Point Tracking) functie en meerdere beveiligingscircuits, en werkt daarom veilig en met hoge efficiëntie en stabiliteit. Hij is geschikt voor IoT op zonne-energie, toepassingen op laag vermogen en andere energiezuinige projecten.Kenmerken Ondersteunt MPPT (Maximum Power Point Tracking), waardoor de efficiëntie van het zonnepaneel wordt gemaximaliseerd Ondersteunt het opladen van accu’s via zonnepaneel / USB-aansluiting Geschikt voor 6 ~ 24 V zonnepaneel, met DC-002 jack ingang of schroefaansluiting Een ingebouwde MPPT SET-schakelaar, waarmee u het niveau selecteert wat het dichtst bij het ingangsniveau ligt om de laadefficiëntie te verbeteren Twee voedingsuitgangen: een USB-poort voor 5 V, en een pinheader voor 3,3 V of 5 V Een ingebouwde aluminium elektrolytische condensator met hoge capaciteit en een SMD keramische condensator, waardoor de rimpelspanning wordt verminderd, en voor stabiele werking Een 14500 accuhouder en een PH2.0 accuconnector, voor het aansluiten van meerdere soorten 3,7 V oplaadbare Li-accu’s Verschillende led-indicatoren, voor het monitoren van het zonnepaneel en de accu Meerdere beveiligingscircuits: over-laden / over-ontladen / bescherming tegen omgekeerd aansluiten / oververhitting / teveel stroom, voor stabiele werking en veilig gebruik Specificaties Zonnecel ingang 6 ~ 24 V (default 6 V) Opladen USB Accu 3,7 V 850 mAh 14500 Li-ion accu (NIET inbegrepen) USB-ingang 5 V (Micro USB) 5 V uitgang 5 V / 1 A (USB OUT, pin header) 3,3 V / 1 A (pin header) Cutoff spanning bij opladen 4,2 V ±1% Over-ontladen beschermingsspanning 2,9 V ±1% Zonnepaneel oplaad efficiency ~78% USB oplaad efficiency ~82% Accu boost output efficiency ~86% Ruststroom (max) <2 mA Bedrijfstemperatuur -40°C ~ 85°C Afmetingen 65,2 x 56,2 x 22,9 mm Opmerking: 14500 accu is NIET inbegrepen.DownloadsWiki

Lees meer minder

This camera module adopts a SmartSens SC3336 sensor chip with 3 MP resolution. It features high sensitivity, high SNR, and low light performance and it is capable of a more delicate and vivid night vision imaging effect, and can better adapt to ambient light changes. Also, it is compatible with Luckfox Pico series boards. Specifications Sensor Sensor: SC3336 CMOS size: 1/2.8" Pixels: 3 MP Static resolution: 2304x1296 Maximum video frame rate: 30fps Shutter: Rolling shutter Lens Focal length: 3.95 mm Aperture: F2.0 FOV: 98.3° (diagonal) Distortion: <33% Focusing: Manual focus Downloads Wiki

Lees meer minder

Waveshare RP2040-PiZero is a high-performance and cost-effective microcontroller board with onboard DVI interface, TF card slot and PIO-USB port, compatible with Raspberry Pi 40-pin GPIO header, easy to develop and integrate into the products. Features RP2040 microcontroller chip designed by Raspberry Pi Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz 264 KB of SRAM, and 16 MB of onboard Flash memory Onboard DVI interface can drive most HDMI screens (DVI compatibility required) Supports using as a USB host or slave via onboard PIO-USB port Onboard TF card slot for reading and writing TF card Onboard Lithium battery recharge/discharge header, suitable for mobile scenarios USB 1.1 with device and host support Drag-and-drop programming using mass storage over USB Low-power sleep and dormant modes 2x SPI, 2x I²C, 2x UART, 4x 12-bit ADC, 16x controllable PWM channels Accurate clock and timer on-chip Temperature sensor Accelerated floating-point libraries on-chip Downloads Wiki

Lees meer minder

Waveshare DVK600 is an FPGA CPLD mother board that features expansion connectors for connecting FPGA CPLD core board and accessory boards. DVK600 provides an easy way to set up FPGA CPLD development system. Features FPGA CPLD core board connector: for easily connecting core boards which integrate an FPGA CPLD chip onboard 8I/Os_1 interface, for connecting accessory boards/modules 8I/Os_2 interface, for connecting accessory boards/modules 16I/Os_1 interface, for connecting accessory boards/modules 16I/Os_2 interface, for connecting accessory boards/modules 32I/Os_1 interface, for connecting accessory boards/modules 32I/Os_2 interface, for connecting accessory boards/modules 32I/Os_3 interface, for connecting accessory boards/modules SDRAM interface for connecting SDRAM accessory board also works as FPGA CPLD pins expansion connectors LCD interface, for connecting LCD22, LCD12864, LCD1602 ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc. 5 V DC jack Joystick: five positions Buzzer Potentiometer: for LCD22 backlight adjustment, or LCD12864, LCD1602 contrast adjustment Power switch Buzzer jumper ONE-WIRE jumper Joystick jumper Downloads Schematics

Lees meer minder

Wveshare CoreEP4CE6 is an FPGA core board that features an EP4CE6E22C8N device onboard supporting further expansion. Features Onboard Serial Configuration Device EPCS16SI8N Integrated FPGA basic circuit, such as clock circuit Onboard nCONFIG button, RESET button, 4x LEDs All the I/O ports are accessible on the pin headers Onboard JTAG debugging/programming interface 2.54 mm header pitch design, suitable for being plugged-in your application system Downloads Wiki

Lees meer minder

Waveshare CoreEP4CE10 is an FPGA core board that features an EP4CE10F17C8N device onboard supporting further expansion. Features Onboard Serial Configuration Device EPCS16SI8N Integrated FPGA basic circuit, such as clock circuit Onboard nCONFIG button, RESET button, 4x LEDs All the I/O ports are accessible on the pin headers Onboard JTAG debugging/programming interface 2.00 mm header pitch design, suitable for being plugged-in your application system Downloads Wiki

Lees meer minder

Waveshare Core3S500E is an FPGA core board that features an XC3S500E device onboard supporting further expansion. Features Onboard 1x XCF04S Integrated FPGA basic circuit, such as clock circuit Onboard nCONFIG button, RESET button, 4x LEDs All the I/O ports are accessible on the pin headers Onboard JTAG debugging/programming interface 2.0 mm header pitch design, suitable for being plugged-in your application system Downloads Wiki

Lees meer minder

The Zero-DISP-7A is a 7? touch display kit for Raspberry Pi Zero with IPS Display Expansion Board featuring 1024x600 pixels and 5-point capacitive touch. Features 7-inch IPS touch display with a hardware resolution of 1024x600. 5-point touch control, toughened glass panel with up to 6H hardness. When working with Raspberry Pi Zero, supports Raspberry Pi OS, Ubuntu, Kali, and Retropie systems. Onboard ETH/USB HUB function, adapting RJ45 and USB port serving as an alii-in-one mini computer. Onboard 4-pin speaker header and 3.5 mm audio jack, support for HDMI audio output. Specifications Zero connectors Mini HDMI port, 2x USB Micro male port (1x HUB, 1x Power supply) Display 7-inch 1024 x 600 pixels, 5-point capacitive touch Networking 100M Ethernet RJ45 port USB 2x USB 2.0 port Audio Headphone jack, 4-pin speaker header Power input USB Type-C Interface, 5V Included 1x Zero-DISP-7A 1x Button board 1x Button board cable (9 cm) 4x White nylon spacer Downloads Wiki

Lees meer minder

This IPS 7.9-inch HDMI touch display with 400 x 1280 resolution, 170° wide viewing angle and built-in ferrite Hi-Fi speaker can be used as a secondary screen for chassis and also supports Raspberry Pi and Jetson Nano. Features 7.9-inch IPS display with a hardware resolution of 400 x 1280. Zinc alloy case, toughened glass panel with up to 6H hardness. When working as a computer monitor, it supports Windows without a driver. When working with Raspberry Pi, it supports Raspberry Pi OS / Ubuntu / Kali and Retropie, driver-free. When working with Jetson Nano, it supports Ubuntu, driver-free. Support backlight control for power saving. Support 5-point capacitive touch control. Specifications Display size 7.9" Viewing angle 170° Resolution 400 x 1280 pixels Display area 191.08 x 60.40 mm IPS version solor gamut 62% NTSC Max brightness 550 cd/m² Backlight adjustment Adjusted by the key/HID software Contrast 900:1 Color depth 16.7M Refresh rate 60 Hz Power port USB-C Display port HDMI interface Dimensions 211 x 73 x 20 mm Included 1x 7.9-inch Side Monitor 1x HDMI to Micro HDMI adapter 1x USB Type-A to Type-C cable (1 m) 1x HDMI flat cable (1 m) 2x Nonskid rubber feet Downloads Wiki

Lees meer minder

Features Standard Raspberry Pi Pico female header for direct attaching Raspberry Pi Pico (if male header soldered), or just through jumper wires Two sets of 2x20 male header, allows connecting more Raspberry Pi Pico expansion modules Clear pinout labels on the front side, easy to use Immersion gold process, beautiful & practical, stunning aesthetic looking

Lees meer minder

The PicoGo is a smart mobile robot based on Raspberry Pi Pico, it includes ultrasonic module, LCD module, Bluetooth module, line following module, and obstacle avoidance module, all these functions are highly integrated for easily achieving IR obstacle avoidance, auto line following, Bluetooth/IR remote control, and more. With various advanced features, it will help you fast get started with smart robot design and development. Features Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series Battery protection circuit: over charge/discharge protection, over current protection, short circuit protection, reverse proof, more stable and safe operating Recharge/Discharge circuit, allows programming/debugging concurrently while recharging 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking Onboard multiple smart robot sensors like line tracking, obstacle avoidance, no more messy wiring 1.14-inch IPS colorful LCD display, 240 x135 pixels, 65K colors Integrates Bluetooth module, allows teleoperations like robot movement, RGB LED display color, buzzer, etc. by using mobile phone APP N20 micro gearmotors, with metal gears, low noise, high accuracy Colorful RGB LED IR obstacle avoidance The module sends IR beam and detects objects by receiving the reflected IR beam, to easily avoid obstacles in the way. Auto line following Features 5-ch IR detector for sensing and analysing the black line, combined with PID algorithm for adjusting robot movement, high sensitivity, stable tracking. Ultrasonic sensor Ultrasonic is generally faster and easy-to-calculate, suitable for functions like real time control, and obstacle avoidance, with the industrial practical ranging accuracy, it is widely used on robot research and development. Object tracking The robot is able to detect front object by ultrasonic or IR, and keeps moving to track the target automatically. IR remote control Integrates IR receiver, so that you can control the robot to move or turn direction by sending infrared light from the remote controller. Bluetooth remote control Comes with mobile phone APP, allows you to use the phone to control the movement of the robot, or control its peripherals like changing LED color, making the buzzer to sound, etc. RGB LED control Included 1x PicoGo base board 1x PicoGo acrylic panel 1x 1.14-inch LCD Module 1x Ultrasonic sensor x1 1x IR remote controller 1x USB-A to micro-B cable 1.2 m 1x PH2.0 8-Pin cable 5 cm opposite side headers 1x Mini cross wrench sleeve 1x Screwdriver 1x Screws and standoffs pack Required 1x Raspberry Pi Pico (pre-soldered header) 1x 5 V/3 A power supply 2x 14500 batteries Downloads Wiki

Lees meer minder

This is a RGB LED matrix digital clock designed for Raspberry Pi Pico. It incorporates high precision RTC chip DS3231, photosensor, buzzer, IR receiver, and buttons, features multiple functions including accurate electronic clock, temperature display, auto brightness adjustment, alarm, and button config. The important part is, rich open source codes and development tutorials are also provided to help you fast get started with Raspberry Pi Pico and make your own original electronic clock. Features Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series Using P3 fine-pitch RGB LED matrix panel, with 2048 individual RGB LEDs, 64×32 pixels, 3 mm pitch, allows displaying text, colorful image, or animation Onboard high precision RTC chip DS3231, with backup battery holder (battery included), maintains accurate timekeeping when main power is off Real-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year with Leap-Year Compensation Valid Up to 2100 Optional format: 24-hour OR 12-hour with an AM/PM indicator 2x programable alarm clock Digital temperature sensor output: ±3°C accuracy Embedded photosensor for auto brightness adjustment due to the ambient light, power saving and eye care Embedded buzzer for alarm or hourly ring, etc. IR receiver, combined with the IR remote controller, supports IR wireless control 5x buttons for configuration, reset, and code programming Quality acrylic back panel and dimmer panel, better looking, more comfortable displaying Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Included 1x Pico-RGB-Matrix-P3-64x32 base board 1x RGB-Matrix-P3-64x32 LED matrix and accessories 1x Black acrylic back panel 1x Dark brown acrylic front panel 1x IR remote controller 1x Double-sided tape 1x Screws pack Downloads Documentation

Lees meer minder

The PoE-ETH-USB-Hub-Box is a Hub kit with PoE/ETH/USB Hub HAT inside. It is tailored for Raspberry Pi Zero series, small in size, each cut-out of the case is exactly aligned with the connector. The case adopts classic Raspberry Pi red/white color combination, with quality dull polish surface, effectively keeping the Zero away from dust. By using this small Hub Box and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi Zero in only one Ethernet cable, along with 3x extended USB ports. Features Designed for Raspberry Pi Zero, compatible with Zero series boards Incorporates RTL8152B Ethernet chip, with 10M / 100M auto-negotiation RJ45 port PoE (Power over Ethernet) feature, 802.3af-compliant Fully isolated SMPS (Switch Mode Power Supply) 3x extended USB ports, compatible with USB 2.0 / 1.1 Angle rounded design, smooth hand feeling, 'simple snap' case lid Quality ABS material, dull polish surface, anti-fingerprint Comes with two different lids, changing as you like Included 1x PoE/ETH/USB Hub HAT kit 1x ABS case 1x Rubber feet 4pcs 1x Screws pack Downloads Documentation

Lees meer minder

This Industrial 6-Channel Relay Module is suitable for Raspberry Pi Zero with pre-soldered pinheader. It provides RS485/CAN Bus, Power Supply Isolation, and Photocoupler Isolation.Features RS485 half-duplex communication: using SP3485, UART control, auto RX/TX switch CAN half-duplex communication: using MCP2515 + SN65HVD230 solution, SPI control Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal Onboard photocoupler isolation, prevent interference from external high-voltage circuit connected to the relay Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic Onboard resettable fuses and protection diodes, ensuring current/voltage stable output, preventing over current/voltage, better shock-resistance performance High quality relay, contact rating: ?10A 250V AC or ?10A 30V DC ABS protection enclosure with rail-mount support, easy to install, safe to use Comes with development resources and manual (wiringPi and python examples) Specifications Operating voltage: 7~36 V (industrial input voltage compatible) Relay channel: 6ch Communication Protocol: RS485, CAN Contact form: 1NO 1NC Included 1x ABS protection enclosure (top and bottom) 1x RPi Zero Relay 1x Screwdriver 1x OPTIONS 12 V, 1 A power adapter 1x Screws pack DownloadsDocumentation

Lees meer minder

The ETH-USB-Hub-Box is a Hub kit with ETH/USB Hub HAT (B) inside. It is tailored for Raspberry Pi Zero series, small in size, each cut-out of the case is exactly aligned with the connector. The case adopts classic Raspberry Pi red/white color combination, with quality dull polish surface, effectively keeping the Zero away from dust. This Hub Box will provide RJ45 Ethernet port and more USB capability for your Zero, make it easy to connect the Internet and sorts of USB devices. Features Designed for Raspberry Pi Zero, compatible with Zero series boards 3x extended USB ports, compatible with USB 2.0 / 1.1 Incorporates RTL8152B Ethernet chip, supports 1x RJ45 Ethernet port, 10/100M auto-negotiation Pogo pin design, for direct connecting with Raspberry Pi Zero/Zero W/Zero WH Angle rounded design, smooth hand feeling, 'simple snap' case lid Quality ABS material, dull polish surface, anti-fingerprint Comes with two different lids, changing as you like Included 1x ETH/USB Hub HAT (B) 1x ABS case 1x Rubber feet 4pcs 1x Screws pack 1x Screwdriver Downloads Documentation

Lees meer minder

Specifications CM4 socket Suitable for all variants of Compute Module 4 Networking Gigabit Ethernet RJ45 connectorM.2 M KEY, supports communication modules or NVME SSD Connector Raspberry Pi 40-PIN GPIO header USB 2x USB 2.0 Type A2x USB 2.0 via FFC connector Display MIPI DSI display port (15-pin 1.0 mm FPC connector) Camera 2x MIPI CSI-2 camera port (15-pin 1.0 mm FPC connector) Video 2x HDMI port (including one port via FFC connector), supports 4K 30fps output RTC N/A Storage MicroSD card socket for Compute Module 4 Lite (without eMMC) variants Fan header No fan control, 5 V Power input 5 V Dimensions 85 x 56 mm Included 1x CM4-IO-BASE-A 1x SSD mounting screw Downloads Wiki

Lees meer minder

Features Advanced Color ePaper (ACeP) technologie, ondersteunt 7-kleuren display Geen achtergrondverlichting, blijft de laatste inhoud weergeven voor een lange tijd, zelfs als de stroom uitgeschakeld is Ultra laag stroomverbruik, in principe is alleen stroom nodig voor het verversen SPI-interface, voor aansluiting met controller boards zoals Raspberry Pi/Jetson Nano/Arduino/STM32, enz. Onboard voltage vertaler, compatibel met 3.3 V / 5 V MCUs Wordt geleverd met ontwikkelingshulpmiddelen en handleiding (voorbeelden voor Raspberry Pi/Jetson Nano/Arduino/STM32) Specificaties Bedrijfsspanning 3,3 V/5 V Display kleur ACeP 7-kleuren Interface 3-draads SPI, 4-draads SPI Grijze schaal 2 Outline afmetingen 138,5 × 100,5 mm Volledige verversingstijd <35s Display-formaat 114,9 × 85,8 mm Versieuwingsvermogen 50 mW (nom.) Dot pitch 0,1915 × 0,1915 mm Stand-by tijd <0.01 uA (bijna geen) Resolutie 600 × 448 pixels Zichthoek >170° Downloads Wiki

Lees meer minder

The Pico-GPS-L76B is a GNSS module designed for Raspberry Pi Pico, with multi satellite systems support including GPS, BDS, and QZSS. It has advantages such as fast positioning, high accuracy, and low power consumption, etc. Combined with the Raspberry Pi Pico, it's easy to use global navigating function.Features Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards Multi satellite systems support: GPS, BDS, and QZSS EASY, self track prediction technology, help quick positioning AlwaysLocate, intelligent controller of periodic mode for power saving Supports D-GPS, SBAS (WAAS/EGNOS/MSAS/GAGAN) UART communication baudrate: 4800~115200bps (9600bps by default) Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts 4x LEDs for indicating the module operating status Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specifications GNSS Frequency band:GPS L1 (1575.42 Mhz)BD2 B1 (1561.098 MHz) Channels: 33 tracking ch, 99 acquisition ch, 210 PRN ch C/A code SBAS: WAAS, EGNOS, MSAS, GAGAN Horizontal position accuracy(autonomous positioning) <2.5 m CEP Time-To-First-Fix @ -130 dBm(EASY enabled) Cold starts: <15s Warm starts: <5s Hot starts: <1s Sensitivity Acquisition: -148 dBm Tracking: -163 dBm Re-acquisition: -160 dBm Dynamic performance Altitude (max): 18000 m Velocity (max): 515 m/s Acceleration (max): 4 g Others Communication interface UART Baudrate 4800~115200bps (9600bps by default) Update rate 1 Hz (default), 10 Hz (max) Protocols NMEA 0183, PMTK Power supply voltage 5 V Operating current 13 mA Overall current consumption < 40 mA@5 V (Continue mode) Operating temperature -40? ~ 85? Dimensions 52 × 21 mm Included 1x Pico-GPS-L76B 1x GPS Antenna

Lees meer minder