Meetapparatuur

1 product


  • MonoDAQ-U-X Multifunctional USB Data Acquisition System (50 kS/s)

    MonoDAQ MonoDAQ-U-X Multifunctional USB Data Acquisition System (50 kS/s)

    Niet op voorraad

    MonoDAQ-U-X is powered from the USB-C port on the backplane, therefore a single USB-C cable is needed for communication and power supply. Power and communication signals are isolated directly after the USB connector, which makes the microcontroller and the front end of the device fully galvanically isolated. Front-end connector features 8 multifunctional pins that can be configured as analog inputs or outputs or as digital inputs or outputs. Front-end is configured with the help of a channel setup table in DEWESoft software.At the core of the measurement chain is a sigma-delta ADC with a maximum sample rate of 50 kS/s (16 bit) and a maximum resolution of 20 bit (100 S/s). If only one input channel is used, the signal is alias-free with a bandwidth of 0.4*fs (sampling frequency). If multiple analog input channels are used, the signals are multiplexed in front of the ADC. It is possible to select up to 8 single-ended voltage inputs and up to 4 differential voltage inputs. Half of the channels can have a high input range of 10 V while the other half is limited to 2 V since there is no voltage divider on those channels.Specifications Power and signal isolation between USB and front-end Max. sample rate: 50 kS/s (16 bit), max. resolution: 20 bit (100 S/s) Can connect up to 2 full bridge strain gauges or up to 4 thermocouples Max. 4 differential or 8 single-ended voltage inputs Current input with internal shunt (0.5 ?) Analog output (+/- 4 V, 14 bit, 50 kS/s) Max. 8 digital inputs or outputs 1 wire, I²C and UART interface on the front connector Internal humidity sensor Internal IMU (3-axial accelerometer and 3-axial gyroscope) Typical applications Embedded loT system power consumption measurement Analog measurement front end for industrial machines and test benches Strain measurement in industrial quality control Industrial condition monitoring (voltage, temperature, current) Precision measurement front end for single-board computers (Raspberry Pi, LattePanda etc.) Precise laboratory power supply for board development Synchronization between devicesMultiple MonoDAQ-U-X devices can be connected to the same PC by using a multiport USB hub. Synchronization between devices is ensured if all of the devices are connected to the same hub.Software supportMonoDAQ-U-X is supported in DEWESoft X3 data acquisition software. On this page, you'll find some of the key functionalities of DEWESoft that are the most important ones for MonoDAQ users as well as additional links to DEWESoft page for in-depth info.For custom applications the device is also supported in Isotel IDM cross-platform software package based on Java. IDM can be installed on any operating system supporting Java and provides the basic interface to the device for configuration and data streaming. There is Python API available to access the device through IDM software.Included 1x MonoDAQ-U-X (50 kS/s) 1x USB-C to USB-A cable 1x Push-in wire terminal DEWESoft X3 LT Life License with FREE updates

    Niet op voorraad

    € 469,00

    Leden € 422,10

Ontdek de meetinstrumenten collectie van Elektor

Elektor is dé plek voor professionals en enthousiastelingen die zich bezighouden met elektronica. We bieden niet alleen een bron van onderwijs en inspiratie, maar ook een uitgebreid assortiment aan meetinstrumenten. Deze tools zijn essentieel voor iedereen die zijn projecten naar een hoger niveau van precisie wil tillen. Of je nu bezig bent met een complex ontwerp of een basiscomponent test, de meetinstrumenten van Elektor staan garant voor betrouwbaarheid en kwaliteit.

Essentiële meetinstrumenten voor jouw Projecten

Elektor begrijpt dat goede meetinstrumenten het hart vormen van elk elektronica project. Daarom hebben we een breed scala aan oscilloscopen, multimeters, signaalgeneratoren en meer in ons aanbod. Deze tools zijn zorgvuldig geselecteerd om te voldoen aan de behoeften van zowel de hobbyist als de professional. Met onze meetinstrumenten kun je met vertrouwen elke uitdaging op het gebied van elektronica aan.

In de snel veranderende wereld van elektronica is het cruciaal om toegang te hebben tot de nieuwste technologie. Onze meetinstrumenten zijn voorzien van de laatste ontwikkelingen op het gebied van elektronica, zodat je altijd vooroploopt. Bij Elektor vind je alles wat je nodig hebt om je elektronica projecten te ondersteunen, van eenvoudige tools tot geavanceerde meetapparatuur.

Meer dan alleen meetinstrumenten

Bij Elektor is het meer dan alleen het aanbieden van gereedschap; we bieden een gemeenschap en een platform voor kennisdeling. Naast meetinstrumenten biedt Elektor magazine ideeën, informatie en inspiratie voor je volgende project. We zijn een bron van innovatie voor elektronica-ontwerpers, zowel voor professioneel gebruik als voor hobbyprojecten.

Bestel bij Elektor voor jouw meetinstrumenten

  • Kwaliteit en Diversiteit: Een uitgebreid assortiment meetinstrumenten van hoge kwaliteit.
  • Scherpe Prijzen: Concurrerende prijzen met extra voordelen voor Elektor-leden.
  • Deskundigheid en Ondersteuning: Jarenlange ervaring in elektronica en een betrouwbare bron van kennis en inspiratie.

Bereid je voor op succes in je elektronica-projecten met de meetinstrumenten van Elektor. Bezoek onze collectie vandaag nog en vind de perfecte tools die passen bij jouw behoeften. Met Elektor kies je voor kwaliteit, innovatie en een community die net zo gepassioneerd is over elektronica als jij.

Login

Wachtwoord vergeten?

Heb je nog geen account?
Maak account aan