Cleaning nozzle drill kit small box containing 10 carbide PCB drills 0.8 mm all with 4 mm shaft. Ideal for drilling small precision holes in pcb's, plastic or soft metal.
These high-precision, anti-static tweezers with black ESD coating can be used in electronics for placing SMD components when soldering and for repairing smartwatches, smartphones, tablets, PCs etc. Ideal for picking up small components in hard to reach places. Specifications Length 120 mm Width 9 mm
Cleaning nozzle drill kit small box containing 10 carbide PCB drills from 0.1 mm to 1 mm all with 4 mm shaft. Ideal for drilling small precision holes in pcb's, plastic or soft metal.
PCBite is the complete solution handling your circuit board during the development phase. Powerful magnets together with a stainless base plate makes the system flexible, mobile and user friendly. The holder can easily be repositioned to handle circuit boards of varying shape and sizes. The probes are steady but yet flexible made for instant measurements or total hands-free operations together with your multimeter or prefered tool. Included 4x PCBite holder 2x Banana to DuPont test wires red/black 2x SP10 probe with red/black probe head and pin tipped test needles 2x Extra crown tipped test needle 1x Set of yellow insulation washers 1x Large Baseplate (A4) 1x Microfiber cloth Downloads User Guide
PCBite houdt uw printplaat vast tijdens het solderen, inspecteren en testen.SP200: 200 MHz handsfree oscilloscoop-probe
De eerste echte hands-free 200-MHz 10:1 oscilloscoop probe! Maakt onmiddellijke metingen of langdurige meetsessies een fluitje van een cent.
Geen draden meer solderen om uw probe aan te sluiten of ingewikkeld gereedschap om in te stellen. Plaats gewoon de naald van de probe op een testpunt of component-pin in het signaalpad en laat los.
Bespaart tijd en frustratie tijdens ontwikkeling, testen en reparaties.
Het compacte ontwerp en de verende testnaald maken het mogelijk om gelijktijdig te meten op meetpunten die dichtbij elkaar in de buurt zitten.
De ground-aansluiting van de probe heeft een kleine, afneembare aansluitklem van hoge kwaliteit en de kabel past direct op een 2,54 mm (0,100ʺ) pitch pin header.
De SP200 wordt geleverd met een krachtige magnetische voet, zoals alle PCBite meetpennen en houders, waardoor de probe gemakkelijk te plaatsen en te herpositioneren is.
SP10: Passieve 1:1 hands-free probe
Een echte hands-free probe! Maakt onmiddellijke metingen of langdurige meetsessies eenvoudig.
Geen draden meer solderen om uw probe aan te sluiten of ingewikkeld gereedschap om in te stellen. Plaats de naald van de probe op een testpunt of component in het signaalpad en laat los.
Bespaart tijd en frustratie tijdens ontwikkeling, verificatie en reparaties.
Het compacte ontwerp en de verende testnaald maken het mogelijk om gelijktijdig te meten op meetpunten die dichtbij elkaar in de buurt zitten.
De probe is stabiel maar toch flexibel, ideaal voor directe metingen of totaal hands-free meten met uw multimeter, logic analyzer of ander meetapparaat.
De dubbele pin header connector past direct op een 2,54 mm (0,100') connector.
De SP10 wordt geleverd met een krachtige magnetische voet, zoals alle PCBite probes en houders, waardoor de probe gemakkelijk te plaatsen en te herpositioneren is.
Inbegrepen
4x PCBite houder
1x grote basisplaat (A4)
4x SP10 meetpen met spitse testnaalden
4x Extra test naald
1x Set gele isolatiering
5x Dupont-naar-dupont meetdraad
2x Banaan-naar-Dupont meetdraad
1x Microvezeldoek
2x SP200 (200-MHz hands-free oscilloscoop probe)
2x Testclip met afneembare kabel voor massaverbinding
4x ground-aansluitdraad (5 cm en 10 cm)
2x Set kleurgecodeerde kabelhouder (4 kleuren)
2x Extra testnaald
Downloads (User Guides)
PCBite Kit
SP200
SP10
This adjustable circuit board holder is ideal for clamping PCB for soldering, desoldering or rework. Features 2 adjustable grips on a retractable stand to accommodate various board sizes. The adjustable clamps allow the PCB to rotate 360 degrees and stay set in any position. The base of this rigid metal stand features four rubber feet to ensure stability. Specifications Product size 30 x 16.5 x 12.5 cm Max. holding size 20 x 14 cm Weight 450 g
Features Cross tips Hardened Stainless Display in mm/inch With lock screw and depth Specifications
Reading range (max.) 150 mm Reading 0.01 mm Scale length (max.) 40 mm Length 235 mm DIN standard DIN 862 Material Steel Material properties rust-proof Weight 300 g
The SQ series of handsfree probes from Sensepeek have a lower point of gravity making them even more stable compared with the original SP series of handsfree probes. All probes in the SQ series are also insulated and can be used handheld as any traditional probe but their full potential is used when measuring handsfree. The SQ series of oscilloscope probes also includes more ground options, have probe tip protection, longer cable and support for oscilloscopes with automatic scaling (10:1). All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle, color-coded cable holders and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Both length and weight of the SQ probes are perfectly balanced to be used with PCBite PCB holders and base plate which is a must for handsfree function. Features Passive 10:1 probe with support for oscilloscopes with automatic scaling Spring-loaded test needle for fine pitch measurements Multiple ground options Color coded cable holders Probe tip protection Insulated, can be used handheld Improved probe holder for handsfree measurement when used with PCBite PCB holders Included 1x SQ500 500 MHz probe with spring tipped test needle 1x SQ probe holder for handsfree measurement 1x Testhook with detachable cables (5 cm & 10 cm) for convenient ground connection 1x Alligator cable for convenient ground connection 1x Standard ground spring, for handheld measurements at rated bandwidth 1x Unique ground spring, for total handsfree measurements at rated bandwidth 1x Set of color coded cable holders (4 colors) 1x Probe tip protection 1x Extra test needle Downloads User Guide SQXX0 Rev1.1
These high-precision, anti-static tweezers with black ESD coating can be used in electronics for placing SMD components when soldering and for repairing smartwatches, smartphones, tablets, PCs etc. Ideal for picking up small components in hard to reach places. Specifications Length 115 mm Width 9 mm
De handsfree probes uit de SQ-serie van Sensepeek hebben een lager zwaartepunt waardoor ze nog stabieler zijn dan de originele handsfree probes uit de SP-serie. Alle probes in de SQ serie zijn ook geïsoleerd en kunnen uit de hand worden gebruikt zoals elke traditionele probe, maar hun volledige potentieel wordt optimaal benut bij handsfree meten. De oscilloscoop probes uit de SQ-serie hebben ook meer mogelijkheden voor aarding, hebben bescherming van de probe tip, een langere kabel en ondersteunen oscilloscopen met automatische schaalverdeling (10:1). Alle populaire eigenschappen van handsfree meten, verwisselbare testpen met fijne veerpunt, kabelhouders met kleurcodering en het minimalistische ontwerp zijn gehandhaafd om het traditionele formaat en de handprobes overbodig te maken. Zowel de lengte als het gewicht van de SQ probes zijn perfect uitgebalanceerd voor gebruik met PCBite PCB houders en grondplaat, wat een must is voor handsfree functie. Kenmerken Passieve 10:1 probe met ondersteuning voor oscilloscopen met automatische schaalverdeling Veerbelaste testpen voor metingen met fijne pitch Meerdere mogelijkheden voor aarding Kabelhouders met kleurcodering Probe tip bescherming Geïsoleerd, kan uit de hand worden gebruikt Verbeterde probehouder voor handsfree metingen bij gebruik met PCBite printplaathouders Inbegrepen
1x SQ350 350 MHz probe met geveerde testpen 1x SQ probe houder voor handsfree metingen 1x Testhaak met afneembare kabels (5 cm & 10 cm) voor eenvoudige aardaansluiting 1x krokodillenkabel voor eenvoudige aardaansluiting 1x Standaard aardingsveer, voor handheld metingen bij nominale bandbreedte 1x Unieke aardingsveer, voor volledige handsfree metingen bij nominale bandbreedte 1x Set kabelhouders met kleurcodering (4 kleuren) 1x Probe tip bescherming 1x Extra testpin Downloads Gebruiksaanwijzing SQXX0 Rev1.1
These high-precision, anti-static tweezers with black ESD coating can be used in electronics for placing SMD components when soldering and for repairing smartwatches, smartphones, tablets, PCs etc. Ideal for picking up small components in hard to reach places. Specifications Length 120 mm Width 9 mm
Blow away the fumes with this handy little fume extractor! This extractor comes ready to run and can be powered off any USB power source with the included 6 foot cable. Simply screw it into any of our Third Hand products, plug in the cable and let her rip! The 3D printed housing creates a compact and durable enclosure that holds the carbon filter to the fan. This system not only pulls away the fumes but also filters it. The small size and flexible arm allows you to place the extractor exactly where you need it. What you get Pre-assembled fume extractor on an arm 6 foot USB micro cable Spare carbon filter Tech Specs Housing dimensions: 2.25 x 2 x 1.25 inch Arm Length: 12' Current Draw: 500 mA Voltage: 5 V (any USB port will work) Note: power source not included. Can use any USB port including phone chargers or computers.
The SQ series of handsfree probes from Sensepeek have a lower point of gravity making them even more stable compared with the original SP series of handsfree probes. All probes in the SQ series are also insulated and can be used handheld as any traditional probe but their full potential is used when measuring handsfree. Features The SQ series of handsfree probes from Sensepeek have a lower point of gravity making them even more stable compared with the original SP series of handsfree probes. All probes in the SQ series are also insulated and can be used handheld as any traditional probe but their full potential is used when measuring handsfree. The SQ series of oscilloscope probes also includes more ground options, have probe tip protection, longer cable and support for oscilloscopes with automatic scaling (10:1). All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle, color-coded cable holders and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Both length and weight of the SQ probes are perfectly balanced to be used with PCBite PCB holders and base plate which is a must for handsfree function. Included 1x SQ200 200 MHz probe with spring tipped test needle 1x SQ probe holder for handsfree measurement 1x Testhook with detachable cables (5 cm & 10 cm) for convenient ground connection 1x Alligator cable for convenient ground connection 1x Standard ground spring, for handheld measurements at rated bandwidth 1x Unique ground spring, for total handsfree measurements at rated bandwidth 1x Set of color coded cable holders (4 colors) 1x Probe tip protection 1x Extra test needle Downloads User Guide SQXX0 Rev1.2
These high-precision, anti-static tweezers with black ESD coating can be used in electronics for placing SMD components when soldering and for repairing smartwatches, smartphones, tablets, PCs etc. Ideal for picking up small components in hard to reach places. Specifications Length 135 mm Width 9 mm
Are you frustrated with traditional third hands? Do you want a more adaptable tool? The Hobby Creek Third Hand is the highest quality helping hand on the market!The Third Hand quickens soldering, electronics, and DIY projects allowing you to finish your work faster than ever before!The Hobby Creek Third Hand makes positioning a breeze with four 12” flexible arms. Hold large and irregular components easily with large alligator clips attached with protective clip covers to prevent marring. The precision machined base is anodized to last a lifetime. Dual machined pockets in the base hold small components and hardware without needing separate containers. The Third Hand comes fully assembled out of the box so you can spend more time on your latest project. Configure your Third Hand arms in any way you’d like with threaded sockets capable of holding up to 8 arms, allowing you to tackle any project that comes your way!
The SQ series of handsfree PCBite probes from Sensepeek are insulated, come with included color-coded cable holders and have a lower point of gravity making them even more stable compared with the original SP series of probes. All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Features All handsfree probes from Sensepeek makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring-loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. Both length and weight of the SQ probes are perfectly balanced to be used with PCBite PCB holders and base plate which is a must for handsfree function. The probe holder comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition. The SQ series of probes can be used handheld without the probe holder as they have an insulated grip but their full potential is used when measuring handsfree. Included 4x SQ10 probes and pin tipped test needles (black) 2x Banana to dupont test wires (red/black) 5x Dupont to dupont test wires 1x Set of cable holders (4 colors) 4x Extra test needles Downloads User guide
These high-precision, anti-static tweezers with black ESD coating can be used in electronics for placing SMD components when soldering and for repairing smartwatches, smartphones, tablets, PCs etc. Ideal for picking up small components in hard to reach places. Specifications Length 110 mm Width 9 mm
The SQ series of handsfree PCBite probes from Sensepeek are insulated, come with included color-coded cable holders and have a lower point of gravity making them even more stable compared with the original SP series of probes. All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Features All handsfree probes from Sensepeek makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring-loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. Both length and weight of the SQ probes are perfectly balanced to be used with the included PCB holders and base plate which is a must for handsfree function. The probe holder comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition. The SQ series of probes can be used handheld without the probe holder as they have an insulated grip but their full potential is used when measuring handsfree. One side of the included baseplate is matte and the other is mirror polished. The mirror polished surface makes it easy to see components on the circuit board underside. For added protection during measurement the included insulation cover can be mounted on one of the surfaces. Included 4x PCBite PCB holders 1x Set of yellow insulation washers for the PCB holders 1x Large Base plate (A4) 1x Insulation cover for the base plate (A4) 1x Micro fiber cloth 4x SQ10 probes and pin tipped test needles (black) 2x Banana to dupont test wires (red/black) 5x Dupont to dupont test wires 1x Set of cable holders (4 colors) 4x Extra test needles Downloads User guide (PCBite kit) User guide (SQ10 probes)
Met de Weller ESF 120ESD PCB-houder fixeert u uw printplaat zonder de noodzaak voor extra benodigdheden of gereedschap. Het frame heeft een veermechanisme en kan 360° om zijn as draaien in stapjes van 15°. De druk-arm is voorzien van een druksysteem om de componenten op hun plaats te houden wanneer de PCB gedraaid wordt voor het solderen. Eigenschappen: Maximale printgrootte 160 x 235 mm Draait 360° in stappen van 15° Klem met veersysteem Druk-arm voor het fixeren van componenten ESD-veilig
These high-precision, anti-static tweezers with black ESD coating can be used in electronics for placing SMD components when soldering and for repairing smartwatches, smartphones, tablets, PCs etc. Ideal for picking up small components in hard to reach places. Specifications Length 125 mm Width 11 mm
The ground probe connection has a detachable quality hook, and the cable fits directly on a 2.54 mm pitch pin header. Included 1 x SP100 - 100 Mhz handsfree oscilloscope probe 1 x Set of color-coded cable holders(4 colors) 1 x Test hook with detachable cable for ground connection 1 x Extra test needle Download User Guide
The SQ series of handsfree PCBite probes from Sensepeek are insulated, come with included color-coded cable holders and have a lower point of gravity making them even more stable compared with the original SP series of probes. All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Features All handsfree probes from Sensepeek makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring-loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. Both length and weight of the SQ probes are perfectly balanced to be used with PCBite PCB holders and base plate which is a must for handsfree function. The probe holder comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition. The SQ series of probes can be used handheld without the probe holder as they have an insulated grip but their full potential is used when measuring handsfree. Included 4x SQ10 probes and pin tipped test needles (black) 2x Banana to dupont test wires (red/black) 5x Dupont to dupont test wires 1x Set of cable holders (4 colors) 4x Extra test needles Downloads User guide
The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals.The probe is steady but yet flexible made for instant measurements or total hands-free operations together with your multimeter, logic analyzer or prefered tool.The dual pin header connector fits directly on a 2.54 mm (0.100”) connector.The SP10 comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition.Included
4x PCBite holder
1x Large base plate (A4)
4x PCBite probe with pin tipped test needle
4x Extra crown tipped test needle
1x Set of yellow insulation washers
5x Dupont to dupont test wire
2x Banana to dupont test wire
1x Microfiber cloth
DownloadsUser Guide
Features
This complete kit includes everything you need for hands-free measurements with your oscilloscope.
SP100 is the first truly handsfree 100 Mhz 10:1 oscilloscope probe! Makes instant measurements or long triggering sessions a breeze.
No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release.
Saves time and frustration during development, verification and repairs.
The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals.
The ground probe connection has a detachable quality hook and the cable fits directly on a 2.54 mm (0.100”) pitch pin header.
The SP100 comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition.
Included
4x PCBite holder
2x SP100 (100 MHz handsfree oscilloscope probe)
1x Large baseplate (A4)
1x Microfiber cloth
1x Set of yellow insulation washers
Downloads
User Guide (PCBite Kit)
User Guide (SPx00)
