Hand Tools

14 producten


  • Sensepeek 4019 PCBite Kit met 2x 200 MHz en 4x SP10 handsfree Probe

    Sensepeek Sensepeek 4019 PCBite Kit met 2x 200 MHz en 4x SP10 handsfree Probe

    PCBite houdt uw printplaat vast tijdens het solderen, inspecteren en testen.SP200: 200 MHz handsfree oscilloscoop-probe De eerste echte hands-free 200-MHz 10:1 oscilloscoop probe! Maakt onmiddellijke metingen of langdurige meetsessies een fluitje van een cent. Geen draden meer solderen om uw probe aan te sluiten of ingewikkeld gereedschap om in te stellen. Plaats gewoon de naald van de probe op een testpunt of component-pin in het signaalpad en laat los. Bespaart tijd en frustratie tijdens ontwikkeling, testen en reparaties. Het compacte ontwerp en de verende testnaald maken het mogelijk om gelijktijdig te meten op meetpunten die dichtbij elkaar in de buurt zitten. De ground-aansluiting van de probe heeft een kleine, afneembare aansluitklem van hoge kwaliteit en de kabel past direct op een 2,54 mm (0,100ʺ) pitch pin header. De SP200 wordt geleverd met een krachtige magnetische voet, zoals alle PCBite meetpennen en houders, waardoor de probe gemakkelijk te plaatsen en te herpositioneren is. SP10: Passieve 1:1 hands-free probe Een echte hands-free probe! Maakt onmiddellijke metingen of langdurige meetsessies eenvoudig. Geen draden meer solderen om uw probe aan te sluiten of ingewikkeld gereedschap om in te stellen. Plaats de naald van de probe op een testpunt of component in het signaalpad en laat los. Bespaart tijd en frustratie tijdens ontwikkeling, verificatie en reparaties. Het compacte ontwerp en de verende testnaald maken het mogelijk om gelijktijdig te meten op meetpunten die dichtbij elkaar in de buurt zitten. De probe is stabiel maar toch flexibel, ideaal voor directe metingen of totaal hands-free meten met uw multimeter, logic analyzer of ander meetapparaat. De dubbele pin header connector past direct op een 2,54 mm (0,100') connector. De SP10 wordt geleverd met een krachtige magnetische voet, zoals alle PCBite probes en houders, waardoor de probe gemakkelijk te plaatsen en te herpositioneren is. Inbegrepen 4x PCBite houder 1x grote basisplaat (A4) 4x SP10 meetpen met spitse testnaalden 4x Extra test naald 1x Set gele isolatiering 5x Dupont-naar-dupont meetdraad 2x Banaan-naar-Dupont meetdraad 1x Microvezeldoek 2x SP200 (200-MHz hands-free oscilloscoop probe) 2x Testclip met afneembare kabel voor massaverbinding 4x ground-aansluitdraad (5 cm en 10 cm) 2x Set kleurgecodeerde kabelhouder (4 kleuren) 2x Extra testnaald Downloads (User Guides) PCBite Kit SP200 SP10

    € 269,00

    Leden € 242,10

  • Sensepeek 4003 PCBite Kit incl. 4x SP10 Probe and Test Wires

    Sensepeek Sensepeek 4003 PCBite Kit incl. 4x SP10 Probe and Test Wires

    The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals.The probe is steady but yet flexible made for instant measurements or total hands-free operations together with your multimeter, logic analyzer or prefered tool.The dual pin header connector fits directly on a 2.54 mm (0.100”) connector.The SP10 comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition.Included 4x PCBite holder 1x Large base plate (A4) 4x PCBite probe with pin tipped test needle 4x Extra crown tipped test needle 1x Set of yellow insulation washers 5x Dupont to dupont test wire 2x Banana to dupont test wire 1x Microfiber cloth DownloadsUser Guide

    € 144,95

    Leden € 130,46

  • Bijna uitverkocht Sensepeek 6003 PCBite Kit incl. 4x SQ10 Probe and Test Wires

    Sensepeek Sensepeek 6003 PCBite Kit incl. 4x SQ10 Probe and Test Wires

    Nog 2 op voorraad

    The SQ series of handsfree PCBite probes from Sensepeek are insulated, come with included color-coded cable holders and have a lower point of gravity making them even more stable compared with the original SP series of probes. All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Features All handsfree probes from Sensepeek makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring-loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. Both length and weight of the SQ probes are perfectly balanced to be used with the included PCB holders and base plate which is a must for handsfree function. The probe holder comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition. The SQ series of probes can be used handheld without the probe holder as they have an insulated grip but their full potential is used when measuring handsfree. One side of the included baseplate is matte and the other is mirror polished. The mirror polished surface makes it easy to see components on the circuit board underside. For added protection during measurement the included insulation cover can be mounted on one of the surfaces. Included 4x PCBite PCB holders 1x Set of yellow insulation washers for the PCB holders 1x Large Base plate (A4) 1x Insulation cover for the base plate (A4) 1x Micro fiber cloth 4x SQ10 probes and pin tipped test needles (black) 2x Banana to dupont test wires (red/black) 5x Dupont to dupont test wires 1x Set of cable holders (4 colors) 4x Extra test needles Downloads User guide (PCBite kit) User guide (SQ10 probes)

    Nog 2 op voorraad

    € 164,95

    Leden € 148,46

  • Sensepeek 4020 PCBite 3x vergrootglas

    Sensepeek Sensepeek 4020 PCBite 3x vergrootglas

    De PCBite loep (premium bouwkwaliteit gemaakt van CNC-bewerkt aluminium) vergroot uw doel en maakt het gemakkelijker om te zien tijdens het solderen, inspectie en metingen. Vooral nuttig bij het plaatsen van PCBite handsfree probes op fijne pitch SMD-componenten tijdens metingen. 3x vergrotende randloze lens voor betere zichtbaarheid van het werkoppervlak en AR coating (anti-reflectie) om reflecties van nabije lichtbronnen te verminderen. Geoptimaliseerd ontwerp, vergroting en brandpunt voor gebruik in combinatie met de PCBite PCB houders en voetplaten die in alle PCBite kits zitten. Kan ook uit de hand worden gebruikt, maar niet standalone zonder een metalen oppervlak als basis. Aan de onderkant van de loepvoet bevindt zich een sterke magneet die perfect in sterkte is uitgebalanceerd. Een lage frictie bodemkap beschermt de magneet en de basisplaat zodat de loep gemakkelijk te verschuiven is bij het verplaatsen of verwijderen van de loep van de basisplaat. Frictie gebaseerde aanpassing van de lens kantel- en draaiposities maakt vervelende en ingewikkelde stelschroeven overbodig.

    € 74,95

    Leden € 67,46

  • Sensepeek 4012 PCBite Kit incl. 2x SP10 Probe for DMM

    Sensepeek Sensepeek 4012 PCBite Kit incl. 2x SP10 Probe for DMM

    PCBite is the complete solution handling your circuit board during the development phase. Powerful magnets together with a stainless base plate makes the system flexible, mobile and user friendly. The holder can easily be repositioned to handle circuit boards of varying shape and sizes. The probes are steady but yet flexible made for instant measurements or total hands-free operations together with your multimeter or prefered tool. Included 4x PCBite holder 2x Banana to DuPont test wires red/black 2x SP10 probe with red/black probe head and pin tipped test needles 2x Extra crown tipped test needle 1x Set of yellow insulation washers 1x Large Baseplate (A4) 1x Microfiber cloth Downloads User Guide

    € 104,95

    Leden € 94,46

  • Sensepeek 4013 SP100 (100 Mhz handsfree Oscilloscope Probe)

    Sensepeek Sensepeek 4013 SP100 (100 Mhz handsfree Oscilloscope Probe)

    The ground probe connection has a detachable quality hook, and the cable fits directly on a 2.54 mm pitch pin header. Included 1 x SP100 - 100 Mhz handsfree oscilloscope probe 1 x Set of color-coded cable holders(4 colors) 1 x Test hook with detachable cable for ground connection 1 x Extra test needle Download User Guide

    € 49,95

    Leden € 44,96

  • Sensepeek 4015 PCBite Kit incl. 2x SP100 (100 MHz handsfree Oscilloscope Probe)

    Sensepeek Sensepeek 4015 PCBite Kit incl. 2x SP100 (100 MHz handsfree Oscilloscope Probe)

    Features This complete kit includes everything you need for hands-free measurements with your oscilloscope. SP100 is the first truly handsfree 100 Mhz 10:1 oscilloscope probe! Makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. The ground probe connection has a detachable quality hook and the cable fits directly on a 2.54 mm (0.100”) pitch pin header. The SP100 comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition. Included 4x PCBite holder 2x SP100 (100 MHz handsfree oscilloscope probe) 1x Large baseplate (A4) 1x Microfiber cloth 1x Set of yellow insulation washers Downloads User Guide (PCBite Kit) User Guide (SPx00)

    € 169,95

    Leden € 152,96

  • Sensepeek 6011 2x SQ10 Probe for DMM (red/black)

    Sensepeek Sensepeek 6011 2x SQ10 Probe for DMM (red/black)

    The SQ series of handsfree PCBite probes from Sensepeek are insulated, come with included color-coded cable holders and have a lower point of gravity making them even more stable compared with the original SP series of probes. All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Features All handsfree probes from Sensepeek makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring-loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. Both length and weight of the SQ probes are perfectly balanced to be used with PCBite PCB holders and base plate which is a must for handsfree function. The probe holder comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition. The SQ series of probes can be used handheld without the probe holder as they have an insulated grip but their full potential is used when measuring handsfree. Included 2x SQ10 probes and pin tipped test needles (red/black) 2x Banana to dupont test wires (red/black) 1x Set of cable holders (red/black) 2x Extra test needles Downloads User guide

    € 49,95

    Leden € 44,96

  • Sensepeek 6005 4x SQ10 Probe incl. Test Wires

    Sensepeek Sensepeek 6005 4x SQ10 Probe incl. Test Wires

    The SQ series of handsfree PCBite probes from Sensepeek are insulated, come with included color-coded cable holders and have a lower point of gravity making them even more stable compared with the original SP series of probes. All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Features All handsfree probes from Sensepeek makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring-loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. Both length and weight of the SQ probes are perfectly balanced to be used with PCBite PCB holders and base plate which is a must for handsfree function. The probe holder comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition. The SQ series of probes can be used handheld without the probe holder as they have an insulated grip but their full potential is used when measuring handsfree. Included 4x SQ10 probes and pin tipped test needles (black) 2x Banana to dupont test wires (red/black) 5x Dupont to dupont test wires 1x Set of cable holders (4 colors) 4x Extra test needles Downloads User guide

    € 94,95

    Leden € 85,46

  • Bijna uitverkocht Sensepeek 6014 SQ200 (200 MHz handsfree Oscilloscope Probe)

    Sensepeek Sensepeek 6014 SQ200 (200 MHz handsfree Oscilloscope Probe)

    Nog 3 op voorraad

    The SQ series of handsfree probes from Sensepeek have a lower point of gravity making them even more stable compared with the original SP series of handsfree probes. All probes in the SQ series are also insulated and can be used handheld as any traditional probe but their full potential is used when measuring handsfree. Features The SQ series of handsfree probes from Sensepeek have a lower point of gravity making them even more stable compared with the original SP series of handsfree probes. All probes in the SQ series are also insulated and can be used handheld as any traditional probe but their full potential is used when measuring handsfree. The SQ series of oscilloscope probes also includes more ground options, have probe tip protection, longer cable and support for oscilloscopes with automatic scaling (10:1). All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle, color-coded cable holders and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Both length and weight of the SQ probes are perfectly balanced to be used with PCBite PCB holders and base plate which is a must for handsfree function. Included 1x SQ200 200 MHz probe with spring tipped test needle 1x SQ probe holder for handsfree measurement 1x Testhook with detachable cables (5 cm & 10 cm) for convenient ground connection 1x Alligator cable for convenient ground connection 1x Standard ground spring, for handheld measurements at rated bandwidth 1x Unique ground spring, for total handsfree measurements at rated bandwidth 1x Set of color coded cable holders (4 colors) 1x Probe tip protection 1x Extra test needle Downloads User Guide SQXX0 Rev1.2

    Nog 3 op voorraad

    € 74,95

    Leden € 67,46

  • Sensepeek 4021 Insulated XL Base Plate

    Sensepeek Sensepeek 4021 Insulated XL Base Plate

    Components are both shrinking and getting increasingly finer pitch year after year but your PCBs might have grown in size or the number of interconnected PCBs or the number of handsfree PCBite probes needed to test your design may have increased making it crowded on our other smaller base plates. Features With a size of 297 x 420 mm (DIN A3) the extra large baseplate has room for most PCBs and many handsfree PCBite probes for those measurements sessions where more channels than available is needed. So if you are looking for more space, extra protection or just want to clean up your work surface then this accessory is a perfect match. Designed to be used with Sensepeeks magnetic PCBite line of products including PCB holders, hands free probes and magnifier. Included 1x XL base plate (DIN A3) with pre-fitted insulation cover

    € 74,95

    Leden € 67,46

  • Sensepeek 6024 SQ500 (500 MHz handsfree Oscilloscope Probe)

    Sensepeek Sensepeek 6024 SQ500 (500 MHz handsfree Oscilloscope Probe)

    The SQ series of handsfree probes from Sensepeek have a lower point of gravity making them even more stable compared with the original SP series of handsfree probes. All probes in the SQ series are also insulated and can be used handheld as any traditional probe but their full potential is used when measuring handsfree. The SQ series of oscilloscope probes also includes more ground options, have probe tip protection, longer cable and support for oscilloscopes with automatic scaling (10:1). All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle, color-coded cable holders and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Both length and weight of the SQ probes are perfectly balanced to be used with PCBite PCB holders and base plate which is a must for handsfree function. Features Passive 10:1 probe with support for oscilloscopes with automatic scaling Spring-loaded test needle for fine pitch measurements Multiple ground options Color coded cable holders Probe tip protection Insulated, can be used handheld Improved probe holder for handsfree measurement when used with PCBite PCB holders Included 1x SQ500 500 MHz probe with spring tipped test needle 1x SQ probe holder for handsfree measurement 1x Testhook with detachable cables (5 cm & 10 cm) for convenient ground connection 1x Alligator cable for convenient ground connection 1x Standard ground spring, for handheld measurements at rated bandwidth 1x Unique ground spring, for total handsfree measurements at rated bandwidth 1x Set of color coded cable holders (4 colors) 1x Probe tip protection 1x Extra test needle Downloads User Guide SQXX0 Rev1.1

    € 119,95

    Leden € 107,96

  • Sensepeek 6005 PCBite Kit incl. 2x SQ10 Probe for DMM

    Sensepeek Sensepeek 6005 PCBite Kit incl. 2x SQ10 Probe for DMM

    The SQ series of handsfree PCBite probes from Sensepeek are insulated, come with included color-coded cable holders and have a lower point of gravity making them even more stable compared with the original SP series of probes. All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Features All handsfree probes from Sensepeek makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring-loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. Both length and weight of the SQ probes are perfectly balanced to be used with PCBite PCB holders and base plate which is a must for handsfree function. The probe holder comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition. The SQ series of probes can be used handheld without the probe holder as they have an insulated grip but their full potential is used when measuring handsfree. Included 4x SQ10 probes and pin tipped test needles (black) 2x Banana to dupont test wires (red/black) 5x Dupont to dupont test wires 1x Set of cable holders (4 colors) 4x Extra test needles Downloads User guide

    € 119,95

    Leden € 107,96

  • Sensepeek 6023 SQ350 (350 MHz handsfree Oscilloscope Probe)

    Sensepeek Sensepeek 6023 SQ350 (350 MHz handsfree Oscilloscope Probe)

    De handsfree probes uit de SQ-serie van Sensepeek hebben een lager zwaartepunt waardoor ze nog stabieler zijn dan de originele handsfree probes uit de SP-serie. Alle probes in de SQ serie zijn ook geïsoleerd en kunnen uit de hand worden gebruikt zoals elke traditionele probe, maar hun volledige potentieel wordt optimaal benut bij handsfree meten. De oscilloscoop probes uit de SQ-serie hebben ook meer mogelijkheden voor aarding, hebben bescherming van de probe tip, een langere kabel en ondersteunen oscilloscopen met automatische schaalverdeling (10:1). Alle populaire eigenschappen van handsfree meten, verwisselbare testpen met fijne veerpunt, kabelhouders met kleurcodering en het minimalistische ontwerp zijn gehandhaafd om het traditionele formaat en de handprobes overbodig te maken. Zowel de lengte als het gewicht van de SQ probes zijn perfect uitgebalanceerd voor gebruik met PCBite PCB houders en grondplaat, wat een must is voor handsfree functie. Kenmerken Passieve 10:1 probe met ondersteuning voor oscilloscopen met automatische schaalverdeling Veerbelaste testpen voor metingen met fijne pitch Meerdere mogelijkheden voor aarding Kabelhouders met kleurcodering Probe tip bescherming Geïsoleerd, kan uit de hand worden gebruikt Verbeterde probehouder voor handsfree metingen bij gebruik met PCBite printplaathouders Inbegrepen 1x SQ350 350 MHz probe met geveerde testpen 1x SQ probe houder voor handsfree metingen 1x Testhaak met afneembare kabels (5 cm & 10 cm) voor eenvoudige aardaansluiting 1x krokodillenkabel voor eenvoudige aardaansluiting 1x Standaard aardingsveer, voor handheld metingen bij nominale bandbreedte 1x Unieke aardingsveer, voor volledige handsfree metingen bij nominale bandbreedte 1x Set kabelhouders met kleurcodering (4 kleuren) 1x Probe tip bescherming 1x Extra testpin Downloads Gebruiksaanwijzing SQXX0 Rev1.1

    € 99,95

    Leden € 89,96

Login

Wachtwoord vergeten?

Heb je nog geen account?
Maak gratis een account aan en geniet van vele voordelen.