Displays & LED's

4 producten


  • 2.2` SPI TFT Display Module ILI9341 (240x320)

    Kuongshun 2.2" SPI TFT Display Module ILI9341 (240x320)

    ILI9341 is a 262144-color single-chip SOC driver for a TFT liquid crystal display with resolution of 240x320 dots (RGB), comprising a 720-channel source driver, a 320-channel gate driver, 172800 bytes GRAM for graphic display data of 240x320 dots (RGB), and power supply circuit.ILI9341 supports parallel 8-/9-/16-/18-bit data bus MCU interface, 6-/16-/18-bit data bus RGB interface and 3-/4-line serial peripheral interface (SPI).The moving picture area can be specified in internal GRAM by window address function. The specified window area can be updated selectively, so that moving picture can be displayed simultaneously independent of still picture area.ILI9341 can operate with 1.65V ~ 3.3V I/O interface voltage and an incorporated voltage follower circuit to generate voltage levels for driving an LCD.ILI9341 supports full color, 8-color display mode and sleep mode for precise power control by software and these features make the ILI9341 an ideal LCD driver for medium or small size portable products such as digital cellular phones, smart phone, MP3 and PMP where long battery life is a major concern.Features Display resolution: 240 x 320 (RGB) Output: 720 source outputs | 320 gate outputs | Common electrode output (VCOM) a-TFT LCD driver with on-chip full display RAM: 172,800 bytes System Interface 8-bits, 9-bits, 16-bits, 18-bits interface with 8080-?/8080- ? series MCU 6-bits, 16-bits, 18-bits RGB interface with graphic controller 3-line / 4-line serial interface Display mode: Full color mode (Idle mode OFF): 262K-color Reduced color mode (Idle mode ON): 8-color Power saving modes: Sleep mode Deep standby mode On chip functions: VCOM generator and adjustment Timing generator Oscillator DC/DC converter Line/frame inversion 1 preset Gamma curve with separate RGB Gamma correction Content Adaptive Brightness Control MTP (3 times): 8-bits for ID1, ID2, ID3 7-bits for VCOM adjustment Low-power consumption architecture Low operating power supplies: VDDI = 1.65V ~ 3.3V (logic) VCI = 2.5V ~ 3.3V (analog) LCD Voltage drive: Source/VCOM power supply voltage AVDD - GND = 4.5V ~ 5.5V VCL - GND = -2.0V ~ -3.0V Gate driver output voltage VGH - GND = 10.0V ~ 20.0V VGL - GND = -5.0V ~ -15.0V VGH - VGL 3 ? 2V VCOM driver output voltage VCOMH = 3.0V ~ (AVDD – 0.5)V VCOML = (VCL+0.5)V ~ 0V VCOMH - VCOML ? 6.0V Operate temperature range: -40? to 85?

    € 22,95

    Leden € 20,66

  • 0.96` OLED Display (Blue, I²C, 4-Pin)

    Kuongshun 0.96" OLED Display (Blue, I²C, 4-Pin)

    1 review

    0,96" (24 mm) monochroom grafisch OLED-display met een resolutie van 128 x 32 pixels, gemonteerd op een printplaat van 28 x 28 mm. Het effectieve weergaveoppervlak is 11 x 23 mm. Het heeft een 4-pins connector voor gebruik met een I²C-bus (met SCL & SDA signalen). Het display werkt met 5 V en 3,3 V toepassingen. Specificaties Grootte: 0,96 inch / 24 mm Resolutie: 128 x 32 pixels Afmetingen printplaat: 28 x 28 mm Effectief weergaveoppervlak: 11 x 23 mm Visuele hoek: 160 ° Ingangsspanning: 3,3 V ~ 6 V Brede spanningsondersteuning: 3,3 V, 5 V Kijkhoek: 160  ° Stuur-IC: SSD1306 Bedrijfstemperatuur: -30 °C tot 80 °C I²C  Signalen: SCL, SDA I²C-adres: 0x78 (of 0x3c, standaard) of 0x7a (of 0x3d). Opmerking: I²C-adressen kunnen (helaas) op twee manieren worden gespecificeerd: met of zonder R/W-bit. Daarom is 0x78 (0x7a) inclusief het R/W-bit gelijk aan 0x3c (0x3d) zonder R/W-bit. OLED Voordelen Kleiner volume Ultra-laag stroomverbruik Hoog contrast Weergavepunt zelflichtend Brede spanningsondersteuning Waarschuwing: Het glas van het display is breekbaar, wees voorzichtig bij het gebruiken ervan. Als het glas breekt, zal het scherm niet goed werken.

    € 9,95

    Leden € 8,96

  • 0.96" OLED Display for Arduino (128x64)

    Kuongshun 0.96" OLED Display for Arduino (128x64)

    Specificaties Grootte: 0,96 inch Resolutie: 128 x 64 Zichthoek: >160 ° Inputspanning: 3,3 V ~ 6 V Brede spanningsondersteuning: 3,3 V, 5 V Kijkhoek: >160 Alleen 2 I/O-poort nodig om te controleren Drive IC: SSD1306 Bedrijfstemperatuur: -30 °C tot 80 °C OLED Voordelen Kleiner volume Extra laag stroomverbruik Hoog contrast Display dot zelflichtend Brede spanningsondersteuning Onafhankelijke communicatiemethode via SPI of IIC 128x64 puntmatrix Brede kijkhoek: maximale kijkhoek 160° Industriële bedrijfstemperatuur: -30 ~ 70 °C Waarschuwing: Het glas van het scherm is zeer dun, wees voorzichtig tijdens het gebruik. Als het glas gebroken is, zal het display niet goed werken.

    € 14,95

    Leden € 13,46

  • 2x16 Character LCD Module (blue/white)

    Kuongshun 2x16 Character LCD Module (blue/white)

    2x16 Character LCD Module (blue/white) Pin No. Pin Name Descriptions 1 VSS Ground 2 VDD Supply voltage for logic 3 V0 Input voltage for LCD 4 RS Data / Instruction Regster Select (H : Data signal, L : Instruction signal) 5 R/W Read / Write (H : Read mode, L : Write mode) 6 E Enable signal 7 DB0 Data bit 0 8 DB1 Data bit 1 9 DB2 Data bit 2 10 DB3 Data bit 3 11 DB4 Data bit 4 12 DB5 Data bit 5 13 DB6 Data bit 6 14 DB7 Data bit 7 15 LED_A Backlight Anode 16 LED_K Backlight Cathode

    € 5,95

    Leden € 5,36

Login

Wachtwoord vergeten?

Heb je nog geen account?
Maak account aan