Zoekresultaten voor "software ISP sh"
PÚCA DSP ESP32 Development Board
PÚCA DSP is an open-source, Arduino-compatible ESP32 development board for audio and digital signal processing (DSP) applications with expansive audio-processing features. It provides audio inputs, audio outputs, a low-noise microphone array, an integrated test-speaker option, additional memory, battery-charge management, and ESD protection all on a small, breadboard-friendly PCB. Synthesizers, Installations, Voice UI, and More PÚCA DSP can be used for a wide range of DSP applications, including but not limited to those in the fields of music, art, creative technology, and adaptive technology. Music-related examples include digital-music synthesis, mobile recording, Bluetooth speakers, wireless line-level directional microphones, and the design of smart musical instruments. Art-related examples include acoustic sensor networks, sound-art installations, and Internet-radio applications. Examples related to creative and adaptive technology include voice user interface (VUI) design and Web audio for the Internet of Sounds. Compact, Integrated Design PÚCA DSP was designed for portability. When used with an external 3.7 V rechargeable battery, it can be deployed almost anywhere or integrated into just about any device, instrument, or installation. Its design emerged from months of experimentation with various ESP32 development boards, DAC breakout boards, ADC breakout boards, Microphone breakout boards, and audio-connector breakout boards, and – despite its diminutive size – it manages to provide all of that functionality in a single board. And it dos so without compromising signal quality. Specifications Processor & Memory Espressif ESP32 Pico D4 Processor 32-bit dual core 80 MHz / 160 MHz / 240 MHz 4 MB SPI Flash with 8 MB additional PSRAM (Original Edition) Wireless 2.4 GHz Wi-Fi 802.11b/g/n Bluetooth BLE 4.2 3D Antenna Audio Wolfson WM8978 Stereo Audio Codec Audio Line In on 3.5 mm stereo onnector Audio Headphone / Line Out on 3.5 mm stereo connector Stereo Aux Line In, Audio Mono Out routed to GPIO Header 2x Knowles SPM0687LR5H-1 MEMS Microphones ESD protection on all audio inputs and outputs Support for 8, 11.025, 12, 16, 22.05, 24, 32, 44.1 and 48 kHz sample rates 1 W Speaker Driver, routed to GPIO Header DAC SNR 98 dB, THD -84 dB (‘A’ weighted @ 48 kHz) ADC SNR 95 dB, THD -84 dB (‘A’ weighted @ 48 kHz) Line input impedance: 1 MOhm Line output impedance: 33 Ohm Form Factor and Connectivity Breadboard friendly 70 x 24 mm 11x GPIO pins broken out to 2.54 mm pitch header, with access to both ESP32 ADC channels, JTAG and capacitive touch pins USB 2.0 over USB Type C connector Power 3.7/4.2 V Lithium Polymer Rechargeable Battery, USB or external 5 V DC power source ESP32 and Audio Codec can be placed into low power modes under software control Battery voltage level detection ESD protection on USB data bus Downloads GitHub Datasheet Links Crowd Supply Campaign (includes FAQs) Hardware Overview Programming the Board The Audio Codec
€ 69,95
Leden € 62,96
Practical Audio DSP Projects with the ESP32
Easy and Affordable Digital Signal Processing The aim of this book is to teach the basic principles of Digital Signal Processing (DSP) and to introduce it from a practical point of view using the bare minimum of mathematics. Only the basic level of discrete-time systems theory is given, sufficient to implement DSP applications in real time. The practical implementations are described in real time using the highly popular ESP32 DevKitC microcontroller development board. With the low cost and extremely popular ESP32 microcontroller, you should be able to design elementary DSP projects with sampling frequencies within the audio range. All programming is done using the popular Arduino IDE in conjunction with the C language compiler. After laying a solid foundation of DSP theory and pertinent discussions on the main DSP software tools on the market, the book presents the following audio-based sound and DSP projects: Using an I²S-based digital microphone to capture audio sound Using an I²S-based class-D audio amplifier and speaker Playing MP3 music stored on an SD card through an I²S-based amplifier and speaker Playing MP3 music files stored in ESP32 flash memory through an I²S-based amplifier and speaker Mono and stereo Internet radio with I²S-based amplifiers and speakers Text-to-speech output with an I²S-based amplifier and speaker Using the volume control in I²S-based amplifier and speaker systems A speaking event counter with an I²S-based amplifier and speaker An adjustable sinewave generator with I²S-based amplifier and speaker Using the Pmod I²S2 24-bit fast ADC/DAC module Digital low-pass and band-pass real-time FIR filter design with external and internal A/D and D/A conversion Digital low-pass and band-pass real-time IIR filter design with external and internal A/D and D/A conversion Fast Fourier Transforms (FFT)
€ 34,95€ 29,95
Leden identiek
Elektor Digital Practical Audio DSP Projects with the ESP32 (E-book)
Easy and Affordable Digital Signal ProcessingThe aim of this book is to teach the basic principles of Digital Signal Processing (DSP) and to introduce it from a practical point of view using the bare minimum of mathematics. Only the basic level of discrete-time systems theory is given, sufficient to implement DSP applications in real time. The practical implementations are described in real time using the highly popular ESP32 DevKitC microcontroller development board. With the low cost and extremely popular ESP32 microcontroller, you should be able to design elementary DSP projects with sampling frequencies within the audio range. All programming is done using the popular Arduino IDE in conjunction with the C language compiler.After laying a solid foundation of DSP theory and pertinent discussions on the main DSP software tools on the market, the book presents the following audio-based sound and DSP projects: Using an I²S-based digital microphone to capture audio sound Using an I²S-based class-D audio amplifier and speaker Playing MP3 music stored on an SD card through an I²S-based amplifier and speaker Playing MP3 music files stored in ESP32 flash memory through an I²S-based amplifier and speaker Mono and stereo Internet radio with I²S-based amplifiers and speakers Text-to-speech output with an I²S-based amplifier and speaker Using the volume control in I²S-based amplifier and speaker systems A speaking event counter with an I²S-based amplifier and speaker An adjustable sinewave generator with I²S-based amplifier and speaker Using the Pmod I²S2 24-bit fast ADC/DAC module Digital low-pass and band-pass real-time FIR filter design with external and internal A/D and D/A conversion Digital low-pass and band-pass real-time IIR filter design with external and internal A/D and D/A conversion Fast Fourier Transforms (FFT)
€ 29,95
Leden € 23,96
Elecrow ESP Terminal (ESP32-S3 gebaseerd ontwikkel-board met 3,5' capacitief TFT-aanraakscherm)
Deze ESP32-terminal is een microcontroller gebaseerd op de ESP32-master. Hij maakt gebruik van de Xtensa 32-bit LX7 dual-core processor met een klokfrequentie tot 240 MHz, ondersteunt 2,4 GHz Wi-Fi en Bluetooth 5 (LE), en kan gemakkelijk overweg met veelgebruikte toepassingsscenario's voor randapparatuur, zoals industriële besturing, detectie en verwerking van agrarische productieomgevingen, intelligente logistieke monitoring, smart home scenario's en nog veel meer. De ESP32-module heeft ook een parallel RGB-interface voor een 3,5 inch capacitief aanraakscherm met een resolutie van 320x480 voor een perfecte beeldweergave met een framerate van 60 FPS. De 4 Crowtail interfaces op de achterkant van deze terminal kunnen worden gebruikt met sensoren uit de Crowtail serie, plug-and-play, om snel en gemakkelijk meer interessante projecten creëren. Daarnaast is hij ook uitgerust met een SD-kaartsleuf voor uitgebreide opslag (SPI-aansluitingen) en een zoemer. Het ESP32 aanraakscherm ondersteunt ESP-IDF en Arduino IDE-ontwikkeling en is compatibel met Python/MicroPython/Arduino. Het ondersteunt ook LVGL, de populairste gratis en open-source embedded grafische bibliotheek om prachtige UI's te maken voor elke MCU, MPU en displaytype. Nu heeft het ook de officiële certificering van LVGL verkregen. Het LVGL-certificaat voor het board toont aan dat ze gemakkelijk gebruikt kunnen worden met LVGL en dat ze goede prestaties leveren voor UI-toepassingen. De onboard laadschakeling en de lithiumbatterij-interface kunnen de type-C voedingsinterface gebruiken om tegelijkertijd stroom te leveren en de batterij op te laden, waardoor er meer mogelijkheden zijn om outdoor scènes te verwezenlijken. Kenmerken Geïntegreerde ESP32-S3-module, die 2,4 GHz Wi-Fi en Bluetooth 5 (LE) ondersteunt.(LE) LCD 3,5 inch parallelle TFT-LCD met 320x480 resolutie Compatibel met Arduino/Python/MicroPython Volwassen softwareondersteuning, ondersteuning voor ESP-IDF en Arduino IDE-ontwikkeling Ondersteuning voor open-source grafische bibliotheek-LVGL Ondersteuning 1T1R-modus, datarate tot 150 Mbps, draadloze multimedia (WMM) Perfect beveiligingsmechanisme, ondersteuning voor AES-128/256, Hash, RSA, HMAC, digitale signaturen en veilig opstarten Ingebouwde oplaadchip en interface, gebruik type-C interface om op te laden Met 4 Crowtail interfaces (HY2.0-4P connector), plug-and-play met verschillende Crowtail sensoren Toepassingen Smarthome Industriële besturing Medische monitor Display voor huishoudelijke apparaten Logistics Monitoring Specificaties ESP32-S3-module met 16 MB flash en 8 MB PSRAM Wi-Fi protocol: 802.11b/g/n (802.11n tot 150 Mbps) Wi-Fi-frequentiebereik: 2,402-2,483 GHz Ondersteuning Bluetooth 5 Met 4 Crowtail interfaces (HY2.0-4P connector) en ingebouwde Micro TF kaartsleuf 3,5-inch TFT LCD RGB-scherm met 320x480 resolutie Driver chip: ILI9488 (16-bits parallelle lijn) Capacitieve aanraakpaneelcontroller IC FT6236-serie Bedrijfsspanning: DC 5 V-500 mA Slaapstroom: USB-voeding: 6,86 mA Lithium batterijvoeding: 3,23 mA LiPo Batterij Interface: PH2.0 Bedrijfstemperatuur: -10°C ~ 65°C Actief gebied: 73,63 x 49,79 mm (L x B) Afmetingen: 106 x 66 x 13 mm (L x B x H) Inbegrepen 1x 3.5-inch ESP RGB-beeldscherm met acryl behuizing 1x USB-C kabel Downloads Wiki Schematic Diagram 16 learning Lessons for LVGL Source code Lesson code LVGL Reference ESP32-S3 Datasheet ILI9488 Datasheet Capacitive Touch Display Data
€ 44,95
Leden € 40,46
Pimoroni Pimoroni Audio Amp SHIM (3 W Mono Amp)
SHIM is een oude Yorkshire term die 'Shove Hardware In Middle' betekent - wij gebruiken het voor Raspberry Pi add-ons die zijn ontworpen om tussen uw Pi en een HAT of mini HAT te worden geklemd. Deze heeft een slimme friction fit header die gemakkelijk over je GPIO pinnen glijdt, niet gesoldeerd hoeft te worden*, en gemakkelijk te verwijderen is.De MAX98357A gecombineerde DAC/versterker-chip neemt digitale audio van hoge kwaliteit van uw Pi en versterkt deze, zodat deze kan worden gebruikt met een luidspreker zonder voeding. De push-fit connectors maken het eenvoudig om uw luidspreker aan te sluiten, of het nu een boekenplank of vloerstaande luidspreker is, de luidspreker in een oude radio, of een andere luidspreker die u misschien heeft liggen. Omdat Audio Amp SHIM geen extra ruimte toevoegt aan uw Pi, is het perfect om in te bouwen in een compacte behuizing - u kunt het gebruiken om een kleine MP3-speler te maken om lokale bestanden af te spelen of te streamen van diensten zoals Spotify, een vintage radio de mogelijkheid te geven om digitale radiostreams af te spelen of bliepgeluiden te integreren in uw eigen retro handheld. Het is ook een handige manier om audio-uitgang aan uw Pi Zero of Pi 400 toe te voegen!Let op: Raspberry Pi and speakers zijn niet inbegrepen bij dit board. Features MAX98357A DAC / amplifier chip Mono 3W audio out Push-fit speaker terminals SHIM-format board with friction-fit connectors 2x mounting holes (M2.5) for if you want to secure everything together with bolts Fully-assembled No soldering required (*unless you're using a Pi that comes without a header) Compatible with all 40-pin header Raspberry Pi models SoftwareDe eenvoudigste manier om alles in te stellen is gebruik te maken van Pimoroni's Pirate Audio software en installer die I2S audio configureert, alsook Mopidy installeert en onze aangepaste Pirate Audio plugins waarmee u Spotify kunt streamen en lokale bestanden kunt afspelen.Hier is hoe te beginnen: Stel een SD-kaart in met de laatste versie van Raspberry Pi OS. Maak verbinding met Wi-Fi of een bekabeld netwerk. Open een terminal en type het volgende:git clone https://github.com/pimoroni/pirate-audiocd pirate-audio/mopidysudo ./install.sh Reboot your Pi Downloads MAX98357A Datasheet Pirate Audio software Schematic
€ 14,95
Leden € 13,46
Pimoroni Fan SHIM - Active Cooling for Raspberry Pi 4
When Raspberry Pi 4's system on chip (SoC) achieves a certain temperature, it lowers its operating speed to protect itself from harm. As a result, you don't get maximum performance from the single board computer. Fan SHIM is an affordable accessory that effectively eliminates thermal throttling and boosts the performance of RPi 4. It's quite easy to attach the fan SHIM to Raspberry pi: fan SHIM uses a friction-fit header, so it just slips onto your Pi's pins and it's ready to go, no soldering required! The fan can be controlled in software, so you can adjust it to your needs, for example, toggle it on when the CPU reaches a certain temperature etc. You can also program the LED as a visual indicator of the fan status. The tactile switch can also be programmed, so you can use it to toggle the fan on or off, or to switch between temperature-triggered or manual mode. Features 30 mm 5 V DC fan 4,200 RPM 0.05 m³/min air flow 18.6 dB acoustic noise (whisper-quiet) Friction-fit header No soldering required RGB LED (APA102) Tactile switch Basic assembly required Compatible with Raspberry Pi 4 (and 3B+, 3A+) Python library and daemon Pinout Scope of delivery Fan SHIM PCB 30 mm 5 V DC fan with JST connector M2.5 nuts and bolts Assembly The assembly is really simple and almost takes no time With the component side of the PCB facing upwards, push the two M2.5 bolts through the holes from below, then screw on the first pair of nuts to secure them and act as spacers. Push the fan's mounting holes down onto the bolts, with the cable side of the fan downwards (as pictured) and the text on the fan upwards. Attach with another two nuts. Push the fan's JST connector into the socket on Fan SHIM. Software With the help of Python library you can control the fan (on/off), RGB LED, and switch. You'll also find a number of examples that demonstrate each feature, as well as a script to install a daemon (a computer program that runs as a background process) that runs the fan in automatic mode, triggering it on or off when the CPU reaches a threshold temperature, with a manual override via the tactile switch.
€ 13,95
Leden € 12,56
Elektor Digital PIC Cookbook for Virtual Instrumentation (E-book)
The software simulation of gauges, control-knobs, meters and indicators which behave just like real hardware components on a PC’s screen is known as virtual instrumentation.In this book, the Delphi program is used to create these mimics and PIC based external sensors are connected via a USB/RS232 converter communication link to a PC. Detailed case studies in this Book include a virtual compass displayed on the PC’s screen, a virtual digital storage oscilloscope, virtual -50 to +125 degree C thermometer, and FFT sound analyser, a joystick mouse and many examples detailing virtual instrumentation Delphi components. Arizona’s embedded microcontrollers – the PIC's are used in the projects and include PIC16F84A, PIC16C71, DSPIC30F6012A, PIC16F877, PIC12F629 and the PIC16F887. Much use is made of Microchip’s 44 pin development board (a virtual instrument ‘engine)’, equipped with a PIC16F887 with an onboard potentiometer in conjunction with the PIC’s ADC to simulate the generation of a variable voltage from a sensor/transducer, a UART to enable PC RS232 communications and a bank of 8 LED's to monitor received data is also equipped with an ISP connector to which the ‘PICKIT 2’ programmer may easily be connected. Full source code examples are provided both for several different PIC’s, both in assembler and C, together with the Pascal code for the Delphi programs which use different 3rd party Delphi virtual components.
€ 16,95
Leden € 13,56
Arduino Arduino Ethernet Shield 2
Zoals altijd bij Arduino is elk element van het platform - hardware, software, en documentatie - vrij beschikbaar en open-source. Dit betekent dat je precies kunt leren hoe het is gemaakt en het ontwerp kunt gebruiken als uitgangspunt voor je eigen circuits. Honderdduizenden Arduino Boards zijn al het voeden van de creativiteit van mensen over de hele wereld, elke dag. Het Arduino Ethernet Shield 2 maakt het mogelijk een Arduino Board aan te sluiten op het internet. Het is gebaseerd op de Wiznet W5500 Ethernet chip. De Wiznet W5500 biedt een netwerk (IP) stack geschikt voor zowel TCP en UDP. Hij ondersteunt tot acht gelijktijdige socket-verbindingen. Gebruik de Ethernet-bibliotheek om sketches te schrijven die met de Shield verbinding maken met internet. Het Ethernet Shield 2 wordt aangesloten op een Arduino Board met behulp van lange wire-wrap headers die door het Shield lopen. Hierdoor blijft de pin-layout intact en kan een ander Shield er bovenop worden gestapeld. De meest recente revisie van het bord laat de 1.0 pin-out op rev 3 van het Arduino UNO bord zien. Het Ethernet Shield 2 heeft een standaard RJ-45 aansluiting, met een geïntegreerde lijntransformator en Power over Ethernet ingeschakeld. Er is een micro-SD-kaartslot aan boord, dat kan worden gebruikt om bestanden op te slaan voor gebruik via het netwerk. Het is compatibel met de Arduino Uno en Mega (met behulp van de Ethernet-bibliotheek). De on-board micro-SD kaartlezer is toegankelijk via de SD bibliotheek. Wanneer met deze bibliotheek wordt gewerkt, bevindt SS zich op pen 4. De oorspronkelijke revisie van het Shield bevatte een full-size SD-kaartsleuf; deze wordt niet ondersteund. Het Shield bevat ook een reset-controller, om ervoor te zorgen dat de W5500 Ethernet module goed wordt gereset bij het opstarten. Eerdere revisies van het Shield waren niet compatibel met de Mega en moesten handmatig worden gereset na het opstarten.
€ 34,95
Leden € 31,46
Arduino Arduino Nano
Specificaties Microcontroller ATmega328 Bedrijfsspanning (logisch niveau) 5 V Ingangsspanning (aanbevolen) 7-12 V Inputspanning (limieten) 6-20 V Digitale I/O-pinnen 14 (waarvan 6 met PWM-uitgang) Analoge ingangspinnen 8 DC-Stroom per I/O-Pin 40 mA Flashgeheugen 16 KB (ATmega168) of 32 KB (ATmega328) waarvan 2 KB gebruikt door bootloader SRAM 1 KB (ATmega168) of 2 KB (ATmega328) EEPROM 512 bytes (ATmega168) of 1 KB (ATmega328) Kloksnelheid 16 MHz Afmetingen 18 x 45 mm Voeding De Arduino Nano kan via de Mini-B USB-verbinding, 6-20 V ongeregelde externe voeding (speld 30), of 5 V geregelde externe voeding (speld 27) worden aangedreven. De voedingsbron wordt automatisch geselecteerd op de hoogste spanningsbron. Geheugen De ATmega168 heeft 16 KB flash-geheugen voor het opslaan van code (waarvan 2 KB wordt gebruikt voor de bootloader), 1 KB SRAM en 512 bytes EEPROM De ATmega328 heeft 32 KB flash-geheugen voor de opslag van code, (waarvan ook 2 KB wordt gebruikt voor de bootloader), 2 KB SRAM en 1 KB EEPROM. Input en output Elk van de 14 digitale pinnen op de Nano kan worden gebruikt als ingang of uitgang, met behulp van pinMode(), digitalWrite(), en digitalRead() functies. Zij werken bij 5 V. Elke pin kan maximaal 40 mA leveren of ontvangen en heeft een interne pull-up weerstand (standaard uitgeschakeld) van 20-50 kOhms. Communicatie De Arduino Nano heeft een aantal faciliteiten om te communiceren met een computer, een andere Arduino, of andere microcontrollers. De ATmega168 en ATmega328 bieden UART TTL (5V) seriële communicatie, die beschikbaar is op de digitale pennen 0 (RX) en 1 (TX). Een FTDI FT232RL op de raad kanaliseert deze periodieke mededeling over USB en de FTDI drivers (inbegrepen met de Arduino-software) verstrekt een virtuele com-haven aan software op de computer. De Arduino-software omvat een seriële monitor waarmee eenvoudige tekstuele gegevens naar en van de Arduino-raad kunnen worden verzonden. De RX en TX LEDs op het bord zullen knipperen wanneer gegevens via de FTDI-chip en de USB-verbinding met de computer worden verzonden (maar niet voor seriële communicatie op pennen 0 en 1). Een SoftwareSerial bibliotheek maakt seriële communicatie op elk van de digitale pinnen van de Nano mogelijk. Programmeren De Arduino Nano kan geprogrammeerd worden met de Arduino software (download). De ATmega168 of ATmega328 op de Arduino Nano wordt geleverd met een bootloader waarmee u nieuwe code kunt uploaden zonder het gebruik van een externe hardware programmeur. Het communiceert met behulp van het originele STK500 protocol (referentie, C header files). U kunt ook de bootloader omzeilen en de microcontroller programmeren via de ICSP (In-Circuit Serial Programming) header met Arduino ISP of vergelijkbaar; zie deze instructies voor details. Automatisch (software) resetten Rather dan het vereisen van een fysieke druk van de het terugstellenknoop vóór een upload, wordt Arduino Nano ontworpen op een manier die het om door software toelaat worden teruggesteld die op een verbonden computer loopt. Eén van de hardwarestroom controlelijnen (DTR) van deFT232RL wordt verbonden met de het terugstellenlijn van de ATmega168 of ATmega328 via een 100 nF condensator. Wanneer deze lijn wordt bevestigd (laag genomen), daalt de resetlijn lang genoeg om de chip te resetten. De Arduino-software gebruikt dit vermogen om u toe te staan om code te uploaden door eenvoudig de uploadknoop in het Arduino-milieu te drukken. Dit betekent dat de bootloader een kortere time-out kan hebben, aangezien het verlagen van DTR goed gecoördineerd kan worden met het begin van de upload.
€ 22,95
Leden € 20,66
Arduino Arduino Portenta Vision Shield (Ethernet)
Features 324x324 pixels camerasensor: gebruik een van de kernen in Portenta om beeldherkenningsalgoritmes uit te voeren met de OpenMV for Arduino editor 100 Mbps Ethernet connector: verbind uw Portenta H7 met het bekabelde Internet 2 onboard microfoons voor richtingsgevoelige geluidsdetectie: vang en analyseer geluid in real-time JTAG connector: voer low-level debugging uit van uw Portenta bord of speciale firmware updates met behulp van een externe programmer SD-Card aansluiting: sla uw vastgelegde gegevens op de kaart op, of lees configuratiebestanden Het Vision Shield is ontworpen om bovenop de Arduino Portenta familie te passen. De Portenta boards zijn voorzien van multicore 32-bit ARM® Cortex™ processoren die draaien op honderden megahertz, met megabytes aan programmageheugen en RAM. Portenta boards worden geleverd met WiFi en Bluetooth.Embedded computer vision gemakkelijk gemaaktArduino heeft samengewerkt met OpenMV om u een gratis licentie voor de OpenMV IDE aan te bieden, een eenvoudige manier om computervisie te gebruiken met MicroPython als programmeerparadigma. Download de OpenMV voor Arduino Editor van onze professionele tutorials site en blader door de voorbeelden die we voor u hebben voorbereid in de OpenMV IDE. Bedrijven over de hele wereld bouwen al hun commerciële producten op basis van deze eenvoudig-maar-krachtige benadering voor het detecteren, filteren en classificeren van afbeeldingen, QR-codes, en anderen. Debugging met professioneel gereedschapSluit uw Portenta H7 aan op een professionele debugger via de JTAG connector. Gebruik professionele software tools zoals die van Lauterbach of Segger bovenop uw board om uw code stap voor stap te debuggen. Het Vision Shield maakt de benodigde pinnen vrij voor het aansluiten van uw externe JTAG. Camera Himax HM-01B0 cameramodule Resolutie 320 x 320 actieve pixel resolutie met ondersteuning voor QVGA beeldsensor Hoge gevoeligheid 3.6? BrightSense™ pixel technologie Microfoon 2 x MP34DT05 Lengte 66 mm Breedte 25 mm Gewicht 11 gr Voor meer informatie, bekijk de tutorials die door Arduino hier.
€ 69,95
Leden € 62,96
EasyVR 3 Plus Shield voor Arduino
Maakt u tijd om met uw Arduino te praten? Misschien moet je! De EasyVR 3 Plus Shield is een spraakherkenningsschild voor Arduino boards waarin een EasyVR module is geïntegreerd. Deze kit bevat de EasyVR 3 Plus Module, de Arduino Shield Adapter, microfoon, en headers. Met al deze onderdelen, is alles geleverd om in een korte tijd aan de slag te gaan met een minimum aan soldeerwerk! EasyVR 3 Plus is een multi-purpose spraakherkenningsmodule, ontworpen om veelzijdige, robuuste en kosteneffectieve spraakherkenningsmogelijkheden toe te voegen aan vrijwel elke toepassing. De EasyVR 3 Plus module kan worden gebruikt met elke host met een UART-interface gevoed op 3.3V - 5V, zoals PIC en Arduino boards. Enkele toepassingsvoorbeelden zijn domotica, zoals spraakgestuurde lichtschakelaars, sloten, gordijnen of keukenapparatuur, of het toevoegen van 'gehoor' aan de meest populaire robots op de markt.Note: Houd er rekening mee dat de EasyVR 3 Plus Shield voor Arduino niet voorgemonteerd is en dat er enige soldeer- en assemblageprocessen nodig zijn voor gebruik.InclusiefEasyVR 3 Plus ModuleEasyVR Shield 3Microfoon met kabelLuidsprekerkabel (Luidspreker niet inbegrepen)Kop Set FeaturesTot 256 door de gebruiker te definiëren Luidsprekerafhankelijke (SD) of Luidsprekerverificatie (SV) commando's, die in ELKE taal kunnen worden getraind, verdeeld in maximaal 16 groepen (elk tot 32 SD of 5 SV commando's).Een selectie van 26 ingebouwde luidspreker-onafhankelijke (SI) commando's voor kant-en-klare basisbediening, in de volgende talen:Versikaans EngelsFransDuitsItaliaansJapansSpaansAndere SI-commando's zijn vrij te downloaden van de Fortebit-website (sectie downloads).SonicNet™-technologie voor draadloze communicatie tussen modules of een andere geluidsbron (audio-cd, dvd, mp3-speler).Tot ongeveer 21 minuten vooraf opgenomen geluiden of spraak.Tot ongeveer 137 seconden voor het opnemen en afspelen van live berichten.Real-time Lip-sync mogelijkheid.DTMF toongeneratie.Differentiële audio-uitgang die direct ondersteunt 8Ω luidsprekers.Gemakkelijk te gebruiken grafische gebruikersinterface voor het programmeren van spraakopdrachten en audio.Standaard UART-interface (gevoed op 3,3V - 5V).Eenvoudig en robuust gedocumenteerd serieel protocol voor toegang en programmering via het hostboard.Zes I/O lijnen voor algemeen gebruik die via UART-commando's kunnen worden aangestuurd.Met de optionele Quick T2SI Lite-licentie, tot 28 aangepaste Speaker Independent (SI) commando vocabulaires, met maximaal 12 commando's elk, voor een totaal van 336 mogelijke commando's in de volgende talen:Versikaans EngelsBrits EngelsFransDuitsItaliaansJapansKoreaansMandarijnSpaansCompatibel met Arduino boards die de 1.0 Shield interface hebben (UNO R3) inclusief, maar niet beperkt tot:Arduino ZeroArduino UnoArduino MegaArduino LeonardoArduino DueOndersteunt 5V en 3.3V main boards via de IOREF pin (standaard naar 5V als deze pin afwezig is)Ondersteunt directe verbinding met de PC op moederborden met een aparte USB/Serial-chip en een speciale software-gestuurde 'bridge mode' op borden met alleen een native USB-interface, voor eenvoudige toegang en configuratie met de EasyVR CommanderMaakt verschillende modi van seriële verbinding mogelijk en ook flash updates voor de embedded EasyVR-module (via de Mode Jumper)Ondersteunt remapping van seriële pinnen gebruikt door het Shield (in SW-modus)Voorziet in een 3.5mm audio uitgang geschikt voor hoofdtelefoon of als line out
€ 47,95
Leden € 43,16
Dragino Dragino LSN50 Waterproof Long Range Wireless LoRa Sensor Node (EU868)
The LSN50 wireless part is based on SX1276/SX1278 allows the user to send data and reach extremely long ranges at low data rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.The LSN50 MCU part uses STM32l0x chip from ST, STML0x is the ultra-low-power STM32L072xx microcontrollers incorporate the connectivity power of the universal serial bus (USB 2.0 crystal-less) with the high-performance ARM® Cortex®-M0+ 32-bit RISC core operating at a 32 MHz frequency, a memory protection unit (MPU), high-speed embedded memories (192 Kbytes of Flash program memory, 6 Kbytes of data EEPROM and 20 Kbytes of RAM) plus an extensive range of enhanced I/Os and peripherals.The LSN50 is an open-source product, it is based on the STM32Cube HAL drivers and lots of libraries can be found on the STM site for rapid development.Features STM32L072CZT6 MCU SX1276/78 LoRa Wireless Modem Pre-load with ISP bootloader I2C,LPUSART1,USB 18 x Digital I/Os 2 x 12bit ADC; 1 x 12bit DAC MCU wakes up by UART or Interrupt LoRa™ Modem Preamble detection Baud rate configurable LoRaWAN 1.0.2 Specification Software base on STM32Cube HAL drivers Open-source hardware / software IP66 Waterproof Enclosure Ultra-Low power consumption AT Commands to setup parameters 4000mAh Battery for Long term use Applications Wireless Alarm and Security Systems Home and Building Automation Automated Meter Reading Industrial Monitoring and Control Long-range Irrigation Systems LoRa Spec 168 dB maximum link budget. +20 dBm - 100 mW constant RF output vs. +14 dBm high-efficiency PA. Programmable bit rate up to 300 kbps. High sensitivity: down to -148 dBm. Bullet-proof front end: IIP3 = -12.5 dBm. Excellent blocking immunity. Low RX current of 10.3 mA, 200 nA register retention. Fully integrated synthesizer with a resolution of 61 Hz. FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation. Built-in bit synchronizer for clock recovery. Preamble detection. 127 dB Dynamic Range RSSI. Automatic RF Sense and CAD with ultra-fast AFC. Packet engine up to 256 bytes with CRC. Built-in temperature sensor and low battery indicator. MCU Spec MCU: STM32L072CZT6 Flash: 192KB SRAM: 20KB EEPROM: 6KB Clock Speed: 32Mhz Absolute Maximum Ratings VCC: 0.5 V ~ 3.9 V Operating Tempature: -40°C ~ 85°C I/O pins: 0.5 V ~ VCC+0.5 V Common DC Characteristics Supply Voltage: 1.8 V ~ 3.6 V Operating Tempature: -40°C ~ 85°C I/O pins: STM32L072CZT6 datasheet Power Consumption STOP Mode: 2.7 ?A @ 3.3 V RX Mode: 7.2 mA TX Mode: 125 mA@ 20 dbm Battery Li/SOCI2 unchargable battery Capacity: 4000 mAh Self Discharge: < 1% / Year @ 25°C Max continuously current: 130 mA Max boost current: 2 A, 1 second
€ 54,95
Leden € 49,46