The universal 4 Pin connector is a white 4-pin buckled connector used on Stem, Twigs and Grove cables. The pin spacing is 2 mm. There are 10 connectors per bag. They can be used in DIY projects.
Specifications
Datasheet
Resonance Frequency (FO): 680 ±20% Hz at 1 V
Rated Impedance: 8 ±20% Ω (at 1 KHz)
Frequency Range: ~600-10 KHz
Rated Input Power: 0.25 W
Max Input Power: 0.5 W
Temperature Range: -20ºC ~ 55ºC
Dimensions
Diameter: 28 mm / 1.1'
Height: 4.5 mm
Weight: 6 g
Cleaning nozzle drill kit small box containing 10 carbide PCB drills 0.8 mm all with 4 mm shaft. Ideal for drilling small precision holes in pcb's, plastic or soft metal.
This color-coded pin header is ideal for use with Raspberry Pi. All pins are color-coded with corresponding functions making prototyping and hacking easier. Specifications Suitable for all Raspberry Pi models with GPIO 2 pin rows with 20 pins each 2.54 mm pin spacing (pitch) Pin height: 3 / 6 mm Total height: approx. 11 mm Colors/Functions Orange = 3.3 V Red = 5 V Pink = I²C Purple = UART Blue = SPI Yellow = DNC Green = GPIO Black = GND (Ground)
The AxiDraw's pen holder normally holds the pen parallel to the front face of the vertical pen slide, either vertically or at 45° from vertical. This heavy-gauge aluminum adapter sits between the front face of the vertical slide and the pen clip, and serves to rotate the pen tip an additional 45°, not from vertical but out from parallel to the front face of the vertical slide. This gives the AxiDraw the ability to hold a pen in a 'right handed' grip, as opposed to the normal 'center-handed' (for lack of a better description) position. The right-handed grip makes it possible to hold the pen at a consistent angle suitable for use with regular pens, but also stub, italic, parallel, and chisel-point pens. Compatibility This adapter is compatible only with AxiDraw V3 family pen plotters that mount the pen on a 2-hole vertical slide. This includes all AxiDraw V3/A3 and AxiDraw V3 XLX units, and all AxiDraw V3 units manufactured after February 2017.
Verbeter en bescherm uw Color Kit Grande met deze speciaal ontworpen, 3D-geprinte behuizing. Deze behuizing is vakkundig vervaardigd met behulp van geavanceerde SLA-printtechnologie en heeft een strakke grijszwarte afwerking die moeiteloos in elke omgeving past.
Kenmerken
Premiumkwaliteit: Gemaakt met nauwkeurig SLA-printen, wat een duurzame en professionele afwerking garandeert.
Stijlvol ontwerp: De grijszwarte kleur voegt een modern tintje toe aan uw Color Kit Grande.
Eenvoudige installatie: Inclusief 4 zelftappende Philips-schroeven voor een veilige en probleemloze montage.
Perfecte pasvorm: Speciaal ontworpen voor de Color Kit Grande.
Inbegrepen
1x 3D-geprinte behuizing
4x Zelftappende kruiskopschroeven
The SQ series of handsfree PCBite probes from Sensepeek are insulated, come with included color-coded cable holders and have a lower point of gravity making them even more stable compared with the original SP series of probes. All the loved features of handsfree measurement, exchangeable fine pitch spring tipped test needle and the minimalistic design is maintained to make traditional sized and handheld probes obsolete. Features All handsfree probes from Sensepeek makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring-loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. Both length and weight of the SQ probes are perfectly balanced to be used with the included PCB holders and base plate which is a must for handsfree function. The probe holder comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition. The SQ series of probes can be used handheld without the probe holder as they have an insulated grip but their full potential is used when measuring handsfree. One side of the included baseplate is matte and the other is mirror polished. The mirror polished surface makes it easy to see components on the circuit board underside. For added protection during measurement the included insulation cover can be mounted on one of the surfaces. Included 4x PCBite PCB holders 1x Set of yellow insulation washers for the PCB holders 1x Large Base plate (A4) 1x Insulation cover for the base plate (A4) 1x Micro fiber cloth 4x SQ10 probes and pin tipped test needles (black) 2x Banana to dupont test wires (red/black) 5x Dupont to dupont test wires 1x Set of cable holders (4 colors) 4x Extra test needles Downloads User guide (PCBite kit) User guide (SQ10 probes)
