Atlas Pro Pack (LCR45 & DCA75)

This pack contains the LCR45 Passive Component Impedance Meter, great for advanced hobbyists and professionals. It also contains the very popular DCA Pro (model DCA75), fantastic for component identification, pinout identification, detailed characteristic measurement and curve tracing on a PC. Complete with USB cable and software on a USB flash drive.

DCA75

Building on the continued success of Peak's existing component identification and analysis instruments, the DCA Pro brings an array of exciting new features for the hobbyist and professional alike.

The DCA Pro is an advanced new design that features a graphics display, USB communications, PC Software and an enhanced component identification library.

  • Automatic component type identification
  • Automatic pinout identification (connect any way round)
  • The DCA Pro supports all the components that the popular Peak Atlas DCA55 supports, but adds plenty more. Components supported include:
  • Transistors (including Darlingtons), Silicon and Germanium types. Measures gain, Vbe and leakage
  • MOSFETs, enhancement mode and depletion mode types. Measure on-threshold (at 5 mA) and approx transconductance (for span of 3-5 mA)
  • JFETs, including normally off SiC types. Measures pinch-off voltage (at 1 uA) and approx transconductance (for span of 3-5 mA)
  • IGBTs (insulated gate bipolar transistors). Measures on-threshold (at 5 mA)
  • Diodes and Diode networks
  • LEDs and bicolour LEDs (2 lead and 3 lead types)
  • Zener Diodes with measurement of zener voltage up to 9 V at 5 mA
  • Voltage regulators (measures regulation voltage, drop-out voltage, quiescent current)
  • Triacs and Thyristors that require less than 10 mA of gate current and holding current

Stand-alone or with a PC

The instrument can be used stand-alone or connected to a PC. Either way, the DCA Pro will automatically identify the component type, identify the pinout and also measure a range of component parameters such as transistor gain, leakage, MOSFET and IGBT threshold voltages, pn characteristics and much more.

Curve Tracing

When connected to a PC using the supplied USB cable, a range of low current curve-tracing functions can be performed. Various graph types are available, with more to follow:

  • Bipolar transistor output characteristics, IC vs VCE
  • Bipolar transistor gain characteristics, HFE vs VCE
  • Bipolar transistor gain characteristics, HFE vs IC
  • MOSFET and IGBT output function, ID vs VDS
  • MOSFET and IGBT transfer function, ID vs VGS
  • JFET output function, ID vs VDS
  • JFET transfer function, ID vs VGS
  • Voltage regulator, VOUT vs VIN
  • Voltage regulator, IQ vs VIN.
  • PN junction I/V curves, forward and reverse options (for Zener diodes)

Curve tracing is performed using test parameters in the range of +/-12 V or +/-12 mA. All curve-tracing data can be instantly pasted into Excel for further graphing and analysis. PC Software is included with the DCA Pro on a Peak USB memory stick. Software designed for Windows 7 and higher (all 32 or 64 bit).

LCR45

A great handheld LCR analyser that can measure the value of your passive component (inductor, capacitor or resistor) and also measure the detailed impedance in a number of modes. The LCR45 offers enhanced measurement resolution (better than 0.1 uH!) whilst also giving you continuous fluid measurements. Additionally, the test frequencies of DC, 1 kHz, 15 kHz and 200 kHz can be set to automatic or manual modes. Supplied with removable gold plated hook probes, battery and user guide. Compatible with standard 2 mm test connectors. Not designed for in-circuit use.

  • Automatic or manual component type selection: Inductor, Capacitor or Resistor
  • Automatic or manual test frequency selection: DC, 1 kHz, 15 kHz and 200 kHz
  • Inductance from 0.1 uH to 10 H
  • Capacitance from 0.1 pF to 10,000 uF
  • Resistance from 0.1 Ohm to 2 MOhm
  • Inductance measurement also shows DC winding resistance
  • Display of "Component type and values", "Complex Impedance", "Magnitude/Phase" and "Admittance"
  • Test frequency displayed for all measurements
  • Typical accuracy of 1.5% for inductors and capacitors (see spec table for details)
  • Typical accuracy of 1% for resistors
  • Test lead complete with gold plated 2 mm plugs and sockets
  • Supplied with removable gold plated hook probes

Included

  • LCR45
  • DCA75
  • Extra GP23 Battery
  • Extra AAA cell
  • Dual Carry Case
Productformulier

This pack contains the LCR45 Passive Component Impedance Meter, great for advanced hobbyists and professionals. It also contains the very... Lees meer

SKU: 17761
EAN: 0700153222907

€ 269,00 Incl. BTW
Leden € 242,10

    • Vandaag verstuurd? Je hebt nog: Mar 01, 2024 17:00:00 +0100

    This pack contains the LCR45 Passive Component Impedance Meter, great for advanced hobbyists and professionals. It also contains the very popular DCA Pro (model DCA75), fantastic for component identification, pinout identification, detailed characteristic measurement and curve tracing on a PC. Complete with USB cable and software on a USB flash drive.

    DCA75

    Building on the continued success of Peak's existing component identification and analysis instruments, the DCA Pro brings an array of exciting new features for the hobbyist and professional alike.

    The DCA Pro is an advanced new design that features a graphics display, USB communications, PC Software and an enhanced component identification library.

    • Automatic component type identification
    • Automatic pinout identification (connect any way round)
    • The DCA Pro supports all the components that the popular Peak Atlas DCA55 supports, but adds plenty more. Components supported include:
    • Transistors (including Darlingtons), Silicon and Germanium types. Measures gain, Vbe and leakage
    • MOSFETs, enhancement mode and depletion mode types. Measure on-threshold (at 5 mA) and approx transconductance (for span of 3-5 mA)
    • JFETs, including normally off SiC types. Measures pinch-off voltage (at 1 uA) and approx transconductance (for span of 3-5 mA)
    • IGBTs (insulated gate bipolar transistors). Measures on-threshold (at 5 mA)
    • Diodes and Diode networks
    • LEDs and bicolour LEDs (2 lead and 3 lead types)
    • Zener Diodes with measurement of zener voltage up to 9 V at 5 mA
    • Voltage regulators (measures regulation voltage, drop-out voltage, quiescent current)
    • Triacs and Thyristors that require less than 10 mA of gate current and holding current

    Stand-alone or with a PC

    The instrument can be used stand-alone or connected to a PC. Either way, the DCA Pro will automatically identify the component type, identify the pinout and also measure a range of component parameters such as transistor gain, leakage, MOSFET and IGBT threshold voltages, pn characteristics and much more.

    Curve Tracing

    When connected to a PC using the supplied USB cable, a range of low current curve-tracing functions can be performed. Various graph types are available, with more to follow:

    • Bipolar transistor output characteristics, IC vs VCE
    • Bipolar transistor gain characteristics, HFE vs VCE
    • Bipolar transistor gain characteristics, HFE vs IC
    • MOSFET and IGBT output function, ID vs VDS
    • MOSFET and IGBT transfer function, ID vs VGS
    • JFET output function, ID vs VDS
    • JFET transfer function, ID vs VGS
    • Voltage regulator, VOUT vs VIN
    • Voltage regulator, IQ vs VIN.
    • PN junction I/V curves, forward and reverse options (for Zener diodes)

    Curve tracing is performed using test parameters in the range of +/-12 V or +/-12 mA. All curve-tracing data can be instantly pasted into Excel for further graphing and analysis. PC Software is included with the DCA Pro on a Peak USB memory stick. Software designed for Windows 7 and higher (all 32 or 64 bit).

    LCR45

    A great handheld LCR analyser that can measure the value of your passive component (inductor, capacitor or resistor) and also measure the detailed impedance in a number of modes. The LCR45 offers enhanced measurement resolution (better than 0.1 uH!) whilst also giving you continuous fluid measurements. Additionally, the test frequencies of DC, 1 kHz, 15 kHz and 200 kHz can be set to automatic or manual modes. Supplied with removable gold plated hook probes, battery and user guide. Compatible with standard 2 mm test connectors. Not designed for in-circuit use.

    • Automatic or manual component type selection: Inductor, Capacitor or Resistor
    • Automatic or manual test frequency selection: DC, 1 kHz, 15 kHz and 200 kHz
    • Inductance from 0.1 uH to 10 H
    • Capacitance from 0.1 pF to 10,000 uF
    • Resistance from 0.1 Ohm to 2 MOhm
    • Inductance measurement also shows DC winding resistance
    • Display of "Component type and values", "Complex Impedance", "Magnitude/Phase" and "Admittance"
    • Test frequency displayed for all measurements
    • Typical accuracy of 1.5% for inductors and capacitors (see spec table for details)
    • Typical accuracy of 1% for resistors
    • Test lead complete with gold plated 2 mm plugs and sockets
    • Supplied with removable gold plated hook probes

    Included

    • LCR45
    • DCA75
    • Extra GP23 Battery
    • Extra AAA cell
    • Dual Carry Case

    Reviews

    Atlas Pro Pack (LCR45 & DCA75)

    Atlas Pro Pack (LCR45 & DCA75)

    5.0 van de 5 sterren

    1 heeft dit product beoordeeld

      Customer Reviews

      Based on 1 review Write a review

    Recently viewed products

    Login

    Wachtwoord vergeten?

    Heb je nog geen account?
    Maak gratis een account aan en geniet van vele voordelen.