The MotoPi is an extension-board to control and use up to 16 PWM-controlled 5 V servo motors. The board can be additional powered by a voltage between 4.8 V and 6 V so a perfect supply is always guaranteed and even larger projects can be powered. With the additional power supply and the integrated Analog-Digital-Converter, new possibilities can be reached. An additional power supply per motor is not required anymore because all connections (Voltage, Ground, Control) are directly connected to the board. The control and the programing can be directly done, as usual, on the Raspberry Pi. Special features 16 Channels, own clock generator, Inkl. Analog Digital Converter Input 1 Coaxial power connector 5.5 / 2.1 mm, 5 V / 6 A max Input 2 Screw terminal, 4.8-6 V / 6 A max Compatible with Raspberry Pi A+, B+, 2B, 3B Dimensions 65 x 56 x 24 mm Scope of supply Board, manual, fixing material

Lees meer minder

The extension set adds 5 more sensors and modules to your experiment case. The required connections are provided by the Port-Doubler board.The set includes an ADC, a linear potentiometer, a joystick module, a magnetic sensor, a pressure and temperature sensor, the Port-Doubler board, a breadboard and a cable set.With the Port-Doubler board, you can now also connect your own projects with the Raspberry Pi and the Joy-Pi, thus extending the range of applications considerably.Specifications ADC (for connecting analog sensors): 4-channel 12-bit accuracy (ADS1115) Linear potentiometer: 10 k? Magnetic sensor: Linear magnetic Hall sensor (49E) Pressure and temperature sensor: BMP280 Joystick: Analog 2-axis joystick module with button Included Port-Doubler board Joystick module ADC Pressure and temperature sensor Linear potentiometer Magnetic sensor Cable set Breadboard

Lees meer minder

Display: 5' (12.7 cm) Weight: 159 g Resolution: 800 x 480 pixels Display Type: Touch-Control Amount HDMI-HDMI Adapter: 1x Micro USB Interface (only Power): 1x Supports Raspberry: Raspbian, Ubuntu Dimensions, without mounting: 120 x 79 x 7 mm Scope of supply: 5 inch HDMI LCD, HDMI-HDMI Adapter, Touchpen

Lees meer minder

Met dit flash-geheugen kun je gegevens extern opslaan en lezen via de SPI-interface van je microcontroller. De bediening van de module is precies hetzelfde als bij een gewone SD-kaart en is daarom bijzonder eenvoudig. De module is vooral geschikt voor mobiele opstellingen, waar normale SD-kaarten uit het SD-cardslot zouden kunnen glippen. Specificaties Speciaal kenmerk Werking op 3 V en 5 V door de geïntegreerde spanningsconverter Voeding Vcc 3-5 V Logica niveau Vcc Interface SPI Geheugen 512 MB Klok frequentie Up to 50 MHz Afmetingen 18 x 22 x 12 mm Gewicht 3 g

Lees meer minder

The JOY-iT Explorer 500 Expansion Board for Raspberry Pi expansion board has the following functions: Pin-Header to put directly on the Raspberry Pi B+, 2B or 3B UART interface: you can easily connect UART modules like for example RS232, RS485, USB to UART (TTL-cable) 8x I/O interface: you can easily connect with I/O controlled modules SPI interface for SPI controlled modules I²C interface for I²C controlled modules LCD interface for HD44780 industrial standard LCD module USB to UART, converter with CP2102 chipset (mini USB port) Power LED 4x programmable LED 4x programmable buttons Potentiometer: control of contrast for LCD displays (point 6) RTC battery holder 32.768K quartz: RTC quartz CP2102: onboard USB to UART chip for debugging CP2102: Jumper for: on / off RTC: Jumper for: on / off User LEDs Jumper for: on / off (point 9) User keys Jumper for: on / off (point 10) It can be directly plugged onto the Raspberry. Interfaces UART, 8x I/O, SPI, I²C, HD44780 Industry-Standard-LCD RTC Battery-Holder, PCF8564-RTC-Chip incl. 32.789K RTC-Quartz Jumper (ON / OFF) RTC, CP2102 (USB to UART), User LEDs, User Keys Dimensions 85 mm x 17 mm x 56 mm Weight 36 g For more information, check out the user manual here.

Lees meer minder

Specifications Resolution 1920 x 1080 Screen Size 15.6' Refresh Rate 60 Hz Contrast 800:1 Brightness 300 nit Screen Type TFT IPS LCD Backlight LED Backlight Color Gamut 16.7M, NTSC 72%, sRGB up to 100% Speaker Double Speaker Viewing Angle 178 ° Aspect Ratio 16:9 Power Supply 5 - 20 V or Type-C USB 3.0 Inputs Mini HDMI, Type-C, Voltage Input Outputs 3.5 mm Jack Plug Operating Temperature 0 °C - 50°C Case Aluminum Alloy Dimensions 360 mm x 230 mm x 10 mm Weight 1390 g Included Joy-View 15 Display Smart Case 1.5m HDMI to mini-HDMI cable 1m Type-C to Type-C cable 1m USB-A to USB-C cable Power Adapter HDMI to mini HDMI adapter Cleaning Towel

Lees meer minder

Resolution: 1024 x 800 pixels Supported Devices: Raspberry Pi A+/ B+/ 2B / 3B, Banana Pi, Banana Pro, Windows-PCs Special features: Can also be used as an independent HDMI-Display LCD Type: TFT Connections: HDMI, Micro-USB Touch Controller: GT811 Touch-Panel: Type Capacitive (5 Multi-Touch) Backlight: LED Display-Size: 154.21 x 85.92 mm Handleidingen (Duits)

Lees meer minder

StromPi sends you an e-mail when his backup battery is flat! Technical details Battery type Lithium iron phosphate (LiFePO4) Capacity 1000 mAh Voltage 3.2 V Features Can be plugged directly to the StromPi 3 Charges immediately on StromPi 3 Own protection circuitry Own charging electronics Increased safety, as chemical self-ignition is not possible Significantly longer life than lithium-ion technologies Wide operating temperature range To our customers residing outside Europe: This product is prohibited from shipment by air!

Lees meer minder

Resolution 1920 x 1080 Screen Size 13.3' Refresh Rate 60 Hz Contrast 800:1 Brightness 300 nit Screen Type TFT IPS LCD Backlight LED Backlight Color Gamut 16.7M, NTSC 72%, sRGB up to 100% Speaker Double Speaker Viewing Angle 178 ° Aspect Ratio 16:9 Power Supply 5 - 20 V or Type-C USB 3.0 Inputs Mini HDMI, Type-C, Voltage Input Outputs 3.5 mm Jack Plug Operating Temperature 0 °C - 50°C Case Aluminum Alloy Dimensions 313 mm x 198 mm x 10 mm Weight 1010 g Included Joy-View 13 Display Smart Case 1.5m HDMI to mini-HDMI cable 1m Type-C to Type-C cable 1m USB-A to USB-C cable Power Adapter HDMI to mini -DMI adapter Cleaning Towel

Lees meer minder

The Explorer Board is the easy and efficient way to develop your Raspberry Pi Pico projects. Since the most important components are already integrated, you save time and effort on wiring. The Explorer Board has a wide range of interface connectors so you can connect your projects to a variety of modules and devices. With the integrated breadboard, you can quickly build and realize your own projects. Thanks to the possibility to connect or disconnect all modules individually, you can use your pins, which are additionally led separately to the outside, for other projects or experiment on the integrated breadboard at any time. Features Fast and efficient experimenting with the Raspberry Pi Pico Raspberry Pi Pico can be plugged in directly All modules can be switched on and off individually Additional integrated breadboard for own development Specifications Integrated modules: 4 RGB LEDs, buzzer, relay, 1.8“ TFT display, DHT11 temperature sensor, 4 buttons, breadboard Interfaces: 4x servo motor, SPI, I²C, UART, 5x crocodile clip connector Power supply: 5 V USB-C Dimensions: 219 x 110 x 27 mm Downloads Manual Examples and libraries

Lees meer minder

The Pico Reset Button offers a direct and user-friendly solution for rebooting your Raspberry Pi Pico. With the Reset Button, you no longer need to disconnect your Raspberry Pi Pico from the power source to reboot. Instead, the button allows you to quickly reboot with just a simple push of a button. Its compact size and easy installation by soldering it to just three points make it a handy tool. The Reset Button is compatible with both the Raspberry Pi Pico and the newer Raspberry Pi Pico W and can be used regardless of model generation. Especially for hobbyists and developers the Pico Reset Button is a useful addition and allows an even easier and more efficient handling of the Raspberry Pi Pico. Features Ultra compact reset button Allows restarting with just a simple push of a button Reliable and permanent connection through soldering Mounting: Soldering on the pins GND, GP22 & RUN Dimensions: 9 x 7 x 4 mm

Lees meer minder

Wide Range Power Supply for Raspberry Pi With the PiEnergy Mini, you can operate your Raspberry Pi with a voltage of 6 to 36 V DC. You can use the button integrated on the board to both power up and power down your Raspberry Pi. Communication with the Raspberry Pi is via GPIO4, but this connection can also be cut by removing a resistor to use the pin freely. Thanks to the ultra-flat design, it can also be used in many housings. The pin header is included and not soldered on to keep the design even flatter. Specifications Input voltage 6 to 36 V DC Output voltage 5.1 V Output current Up to 3 A (active ventilation recommended for additionally connected loads) Cable cross-section at the power input 0.2-0.75 mm² Interface to the Raspberry Pi GPIO4 Microcontroller ATtiny5 Further connections 5 V fan connector (2-pin/2.54 mm)Solder pads for external on/off switch Compatible with Raspberry Pi 3, 4, 5 Dimensions 23 x 56 x 11 mm Included Board with mounted heat sink Pin header (2x5) Spacer, screw, nut Downloads Datasheet Manual

Lees meer minder