The OWON AG1022F is a 25 MHz dual-channel function generator with advanced DDS technology, offering a 125 MS/s sampling rate and 14-bit vertical resolution for precise signal generation. It supports a wide range of waveforms, including sine, square, saw-tooth, pulse, noise, sync, exponential rise/decay, and 32-channel digital waves. Additionally, it provides DC output and supports AM, FM, PM, FSK, and PWM modulation, making it a versatile tool for various testing and signal processing applications.
Kenmerken
Advanced DDS technology, up to 25 MHz frequency output
125 MS/s sample rate, and 1 μHz frequency resolution
Vertical Resolution: 14 bits, and 8K arb waveform length
Comprehensive waveform output: 5 basic waveforms, and 45 built-in arbitrary waveforms
Comprehensive modulation functions: AM, FM, PM, FSK, PWM, ASK, PSK, Sweep, and Burst
SCPI, and LabVIEW supported
4-inch high resolution LCD (480 x 320)
Build-in 200 MHz hardware counter
6 bits/sec frequency rate, frequency measure ranges from 100 MHz ~ 200 MHz. Signal time, duty cycle and pulse width can be measured.
Specificaties
AG1022F
Channel
Dual + Trigger
Frequency Output
25 MHz
Sample Rate
125 MS/s
Vertical Resolution
14 bits
Standard Waveform
Sine, Square, Pulse, Ramp, and Noise
Arbitrary Waveform
Exponential Rise, Exponential Fall, Sin(x)/x, Step Wave, and others, total 45 built-in waveforms, and user-defined arbitrary waveform
Frequency (resolution 1 μHz)
Sine
1 μHz – 25 MHz
Square
1 μHz – 5 MHz
Pulse
1 μHz – 5 MHz
Ramp
1 μHz – 1 MHz
Noise
25 MHz (-3 dB) (typical)
Arb
1 μHz – 10 MHz
Amplitude
Amplitude
1 mVpp – 10 Vpp (50 Ω), 1 mVpp – 20 Vpp (high impedance)
Resolution
1 mVpp or 4 digits
DC Offset Range (AD+DC)
±5 V (50 Ω), ±10 V (high impedance)
DC Offset Range Resolution
1 mV or 4 digits
Load Impedance
50 Ω (typical)
Arbitrary Waveform
Wave Length
2 pts to 8K pts
Non-volatile Memory
64 M byte
Modulation Waveform
AM, FM, PM, FSK, ASK, PSK, Sweep, and Burst
Modulation Frequency
2 mHz to 20.00 KHz (FSK 2 mHz – 100 KHz)
Function
Frequency, Period, +Width, -Width, +Duty, and -Duty
Frequency Range
100 mHz ~ 200 MHz
Frequency Resolution
6 digits/s
Input/Output
Display
4 inch (480 x 320 pixels) LCD
Type
Counter
External modulation input
External trigger input
External reference clock input / output
Dimensions
235 x 110 x 295 mm
Weight
3.0 kg
Inbegrepen
1x OWON AG1022F waveform generator
1x 220 V Power cable
1x USB Cable
1x BNC to BNC Cable
1x CD ROM
1x Quick start guide
Downloads
Datasheet
Manual
PC Software
PC Software 2
SIGLENT’s SDS1000X-E Series Super Phosphor Oscilloscope is available in one bandwidth, 200 MHz. It has a maximum sample rate of 1 GSa/s and a standard record length of 1 Mpts. For ease-of-use, the most commonly used functions can be accessed with its user-friendly front panel design.
The SDS1000X-E series employs a new generation of SPO (Super Phosphor Oscilloscope) technology that provides excellent signal fidelity and performance. The system noise is also lower than similar products in the industry. It comes with a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/ sec (sequence mode).
The SDS1000X-E also employs a 256-level intensity grading display function and a color temperature display mode not found in other models in this class. Siglent’s latest oscilloscopes offering supportsmultiple powerful triggering modes including serial bus triggering. Decoding is standard configuration including IIC,SPI,UART,CAN,LIN. History waveform recording and sequential triggering enable extended waveform recording and analysis.
Another powerful addition is the new 1 million points FFT math function that gives the SDS1000X-E very high frequency resolution when observing signal spectra. The new design also includes a hardware co-processor that delivers measurements quickly and accurately.
The features and performance of Siglent’s new SDS1000X-E cannot be matched anywhere else in this price class.
Specificaties
Bandwidth
200 MHz
Channels
2CH+1EXT
Real time sampling rate
1 GSa/s
Memory depth
7 Mpts/CH (Dual-Channel); 14 Mpts/CH (Single-Channel)
Waveform Capture Rate (Max.)
100,000 wfm/s (normal mode); 400,000 wfm/s (sequence mode)
Serial Trigger (Standard)
IIC, SPI, UART/RS232, CAN, LIN
Decode Type (Standard)
IIC, SPI, UART/RS232, CAN, LIN
Trigger Type
Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video
Probe (Std)
2 pcs passive probe PP215
Display
7 inch TFT-LCD (800x480)
Weight
Without package 2.5 kg; with package 3.5 kg
Downloads
Datasheet
Manual
Programming Guide
Siglent's SDS2000X Plus series Digital Storage Oscilloscopes are available in bandwidths of 100 MHz, 200 MHz, and 350 MHz, have a maximum sample rate of 2 GSa/s, a maximum record length of 200 Mpts/ch, and up to 4 analog channels + 16 digital channels mixed-signal analysis ability.
The SDS2000X Plus series employs Siglent’s SPO technology with a maximum waveform capture rate of up to 120,000 wfm/s (normal mode, up to 500,000 wfm/s in Sequence mode), 256-level intensity grading display function plus a color temperature display mode. It also employs an innovative digital trigger system with high sensitivity and low jitter. The trigger system supports multiple powerful triggering modes including serial bus triggering. History waveform recording, Sequence acquisition, Search and Navigate functions allow for extended waveform records to be captured, stored, and analyzed. An impressive array of measurement and math capabilities, options for a 50 MHz waveform generator, as well as serial decoding, mask test, bode plot, and power analysis are also features of the SDS2000X Plus. A 10-bit acquisition mode helps to satisfy applications that require more than 8-bit resolution.
The large 10.1’’ capacitive touch screen supports multi-touch gestures, while the remote web control, mouse and external keyboard support greatly improve the operating efficiency of the SDS2000X Plus.
Features
100 MHz, 200 MHz, 350 MHz (upgradable to 500 MHz) models
Real-time sampling rate up to 2 GSa/s
Record length up to 200 Mpts
Serial bus triggering and decoder, supports I²C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I²S and MIL-STD-1553B
Provide 10 bit mode, Vertical and Horizontal Zoom
Capacitive touch screen supports multi-touch gestures
Siglent SDS2000X Plus Oscilloscopes
SDS2102X Plus
SDS2104X Plus
SDS2204X Plus
SDS2354X Plus
Bandwidth
100 MHz
100 MHz
200 MHz
350 MHz
Channels
2
4
4
4
Real-time sampling rate
2 GSa/s
2 GSa/s
2 GSa/s
2 GSa/s
Capture rate
120,000 wfm/s
120,000 wfm/s
120,000 wfm/s
120,000 wfm/s
Memory depth
200 Mpts/ch
200 Mpts/ch
200 Mpts/ch
200 Mpts/ch
Included
Siglent SDS2354X Plus Oscilloscope
Passive probes
Power cord
USB cable
Manual
Downloads
Datasheet
Manual
Quick guide
User manual
Firmware
Siglent's SDS2000X Plus series Digital Storage Oscilloscopes are available in bandwidths of 100 MHz, 200 MHz, and 350 MHz, have a maximum sample rate of 2 GSa/s, a maximum record length of 200 Mpts/ch, and up to 4 analog channels + 16 digital channels mixed-signal analysis ability.
The SDS2000X Plus series employs Siglent’s SPO technology with a maximum waveform capture rate of up to 120,000 wfm/s (normal mode, up to 500,000 wfm/s in Sequence mode), 256-level intensity grading display function plus a color temperature display mode. It also employs an innovative digital trigger system with high sensitivity and low jitter. The trigger system supports multiple powerful triggering modes including serial bus triggering. History waveform recording, Sequence acquisition, Search and Navigate functions allow for extended waveform records to be captured, stored, and analyzed. An impressive array of measurement and math capabilities, options for a 50 MHz waveform generator, as well as serial decoding, mask test, bode plot, and power analysis are also features of the SDS2000X Plus. A 10-bit acquisition mode helps to satisfy applications that require more than 8-bit resolution.
The large 10.1’’ capacitive touch screen supports multi-touch gestures, while the remote web control, mouse and external keyboard support greatly improve the operating efficiency of the SDS2000X Plus.
Features
100 MHz, 200 MHz, 350 MHz (upgradable to 500 MHz) models
Real-time sampling rate up to 2 GSa/s
Record length up to 200 Mpts
Serial bus triggering and decoder, supports I²C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I²S and MIL-STD-1553B
Provide 10 bit mode, Vertical and Horizontal Zoom
Capacitive touch screen supports multi-touch gestures
Siglent SDS2000X Plus Oscilloscopes
SDS2102X Plus
SDS2104X Plus
SDS2204X Plus
SDS2354X Plus
Bandwidth
100 MHz
100 MHz
200 MHz
350 MHz
Channels
2
4
4
4
Real-time sampling rate
2 GSa/s
2 GSa/s
2 GSa/s
2 GSa/s
Capture rate
120,000 wfm/s
120,000 wfm/s
120,000 wfm/s
120,000 wfm/s
Memory depth
200 Mpts/ch
200 Mpts/ch
200 Mpts/ch
200 Mpts/ch
Included
Siglent SDS2204X Plus Oscilloscope
Passive probes
Power cord
USB cable
Manual
Downloads
Datasheet
Manual
Quick guide
User manual
Firmware
De Siglent SDL1020X-E DC meetsnoeren hebben een meetresolutie van 0,1 mV/0,1 mA en de basis SDL1000X-E serie heeft een resolutie van 1 mV/1 mA en instelbare stroom flankstijgtijden van 0,001 A/?s~2,5 A/?s. Voor communicatie en bediening op afstand bevat de SDL serie S232/USB/LAN interfaces. De SDL1020X-E levert stabiliteit over een breed scala van toepassingen en kan aan allerlei test vereisten voldoen. o.a: Voeding, batterij/handapparaat ontwerp, industrie, LED verlichting, auto-elektronica, en ruimtevaart.
Kenmerken
SDL1020X-E (één kanaal): DC 150 V/30 A, totaal vermogen 200 W
4 Statische modes / Dynamische mode: CC/CV/CR/CP
CC Dynamische stand: Continu, gepulseerd, omgeschakeld
CC Dynamische stand: 25 kHz, CP Dynamische stand: 12,5 kHz, CV Dynamische modus: 0,5 Hz
Meetsnelheid van spanning en stroom: tot 500 kHz
Instelbaar bereik van de stijgtijd van de stroom: 0,001 A/us~2,5 A/us
Min. afleesresolutie: 0,1 mV, 0,1 mA
Kortsluit-, batterijtest-, CR-LED modus-, en fabriekstestfuncties
4-draads SENSE compensatie mode functie
List functie ondersteunt het bewerken van wel 100 stappen
Programmeerfunctie ondersteunt 50 groepen stappen
OCP, OVP, OPP, OTP en LRV beveiliging
Externe analoge regeling
Spanning, stroom bewaking via 0-10 V
3,5 inch TFT-LCD scherm, geschikt voor gelijktijdige weergave van meerdere parameters en toestanden
Ingebouwde RS232/USB/LAN communicatie interface, USB-GPIB module (optioneel)
Trendgrafiek van golfvormen en gemakkelijk te gebruiken functies voor het opslaan en oproepen van bestanden
Inclusief PC software: Ondersteunt SCPI, LabView aandrijving
Inbegrepen
1x Siglent SDL1020X-E DC programmeerbare belasting
1x Snelstartgids
1x Garantiekaart
1x Netsnoer
1x USB kabel
Downloads
Datasheet
Manual
Programming Guide
PC Software
De DSO1511G oscilloscoop met geavanceerde ARM+FPGA architectuur levert uitzonderlijke prestaties met een bandbreedte van 120 MHz en een bemonsteringssnelheid van 500 MSa/s, waardoor precisie en stabiliteit wordt gegarandeerd voor zowel professionals als liefhebbers.
Door zijn veelzijdigheid is hij ideaal voor probleemoplossing in MCU's, voertuigreparaties, diagnostiek van apparaten, doe-het-zelf-elektronica, testen van voedingen en analyse van omvormers.
Het apparaat beschikt ook over een geïntegreerde signaalgenerator, die instelbare golfvormen kan uitvoeren met een amplitude van 2,5 V, een frequentiebereik van 0-2 MHz en een nauwkeurigheid van 0,1 Hz.
Kenmerken
120 MHz bandbreedte
500 MSa/s sampling rate
2 MHz signaalgenerator
14 metingen
10 mV verticale gevoeligheid
Video-uitvoer
FFT-spectrum
PC-verbinding
Specificaties
Bandbreedte
120 MHz
Sampling rate
500 MSa/s
Display
2,4" kleuren-TFT (320 x 240)
Metingen
14 soorten
Verticale precisie
±2%
Stijgtijd
<3ns
Opslagdiepte
128 Kb
Impedantie
1 MΩ
Tijdbasis
5ns-10s
Verticale gevoeligheid
10 mV/div-10 V/div
Max. spanning
±40 V (x1)±400 V (x10)
Triggermodus
Auto/Normal/Single
Triggertype
Rise/Fall
Triggerniveau
Manual/Auto
Weergavemodus
YT/Roll
Persistentie
Geen/1s/∞
Golfvormen
Sinus/Square/Triangle/Noise
Frequentie
0-2 MHz
Voeding
USB-C (5 V)
Batterij
2500 mAh lithiumbatterij
Afmetingen
107 x 72 x 32 mm
Gewicht
166 g
Inbegrepen
1x DSO1511G oscilloscoop
1x P6100 probe
1x Video cable
1x USB cable
1x Ring-shaped Stand
1x Storage bag
1x Manual
Downloads
Manual
De JOY-iT JDS2960 is een 2-kanaals signaalgenerator die signalen tot 60 MHz kan produceren. Door het compacte ontwerp en de mogelijkheid om hem te bedienen met een powerbank is hij ideaal voor mobiel gebruik.
Met een verscheidenheid aan golfvormen, waaronder sinus, vierkant, driehoek, puls, halve golf en meer, is het geschikt voor verschillende meettechnologietoepassingen.
Bovendien beschikt de JDS2960 over een frequentietoewijzing van 1 kanaal. De hoge frequentienauwkeurigheid van ±20 ppm en stabiliteit van ±1 ppm/3 h zorgen voor een uitstekende signaalkwaliteit en grote flexibiliteit.
Het 2,4-inch TFT-kleurendisplay zorgt voor een gebruiksvriendelijke bediening en maakt een breed scala aan toepassingen mogelijk.
Kenmerken
2 kanalen
Tot 60 MHz
Robuuste aluminium behuizing
1-kanaals frequentieteller
Tot 20 Vpp
Veel verschillende voorgeprogrammeerde golfvormen en maximaal 60 door de gebruiker gedefinieerde golfvormen
Pulsfunctie
Specificaties
Kanalen
2-kanaals signaalgenerator1-kanaals frequentiemeter
Frequentiebereik
Sinus: 0-60 MHzVierkant, driehoek: 0-25 MHzTTL, puls: 0-6 MHz
Signaalformulieren
Sinus, vierkant, driehoek, puls, halve/vaste golf, exponentiële stijging/daling, etc.
Meetbereik frequentieteller
1-100 MHz
Frequentienauwkeurigheid
±20 ppm
Frequentiestabiliteit
±1 ppm/3 uur
Sampling rate
266 MSa/s
Display
2,4" TFT-kleuren-LCD
Verticale asresolutie
14 bits
Amplitudebereik
<10 MHz: 0-20 Vpp>10 MHz: 0-10 Vpp
Amplituderesolutie
1 mV
Amplitudestabiliteit
± 5%/5h
Vlakheid van de amplitude
<10 MHz: ±5%>10 MHz: ±10%
Impedantie van uitvoer
50 Ω ±10%
Vervormingsfactor
<0,8% (20 Hz-20 KHz, 0 dBm)
Afmetingen
145 x 95 x 55 mm
Gewicht
900 g
Inbegrepen
1x JOY-iT JDS2960 Signaalgenerator
1x Voedingseenheid
1x BNC-BNC-kabel
2x BNC krokodillenklemkabels
1x USB-DC-voedingskabel
1x USB-datakabel
Downloads
Datasheet
Manual
Software
Deze buitenantenne van glasvezel is geoptimaliseerd voor het ontvangen van signalen in de 868 MHz ISM-band en ondersteunt technologieën zoals Sigfox, LoRa, Mesh Networks en Helium. De antenne bestaat uit een halvegolfdipool met een versterking van 4,4 dBi, ingekapseld in een glasvezelradome met een aluminium montagebasis.
Specificaties
Frequentie
868-870 MHz
Antennetype
Dipool 1/2 golf
Connector
N vrouwelijk
Installatietype
Mastdiameter 35-60 mm (montagebeugel meegeleverd)
Winst
4,4 dBi
SWR
≤1,5
Type polarisatie
Verticaal
Maximaal vermogen
10 W
Impedantie
50 Ohm
Afmetingen
52,5 cm
Buisdiameter
26 mm
Basisantenne
32 mm
Bedrijfstemperatuur
−30°C tot +60°C
Inbegrepen
ISM-bandantenne (868 MHz)
Mastbeugel (voor installatie op een mast met een diameter van 35 tot 60 mm)
,
van Clemens Valens
Review: Owon HDS2102S handheld 2-kanaals 100 MHz oscilloscoop, multimeter & signaalgenerator
[Gesponsord] De Owon HDS2102S is een draagbare twee-kanaals 100 MHz oscilloscoop, multimeter en functiegenerator in één. The oscilloscoop heeft een bandbreedte van 100 MHz, een...