Raspberry Pi Power Supplies

22 producten


  • Official EU Power Supply for Raspberry Pi 4 (black)

    Raspberry Pi Foundation Official EU Power Supply for Raspberry Pi 4 (black)

    The Raspberry Pi USB-C power supply is designed specifically to power the latest Raspberry Pi 4 Model B computers. The power supply features a USB-C cable and is available in four different models to suit different international power sockets, and in two colors. Specifications Output Output voltage +5.1 V DC Minimum load current 0 A Nominal load current 3.0 A Maximum power 15.3 W Load regulation ±5 % Line regulation ±2 % Ripple & noise 120 mVp-p Rise time 100 ms maximum to regulation limits for DC outputs Turn-on delay 3000 ms maximum at nominal input AC voltage and full load Protection Short circuit protectionOvercurrent protectionOver temperature protection Efficiency 81% minimum (output current from 100%, 75%, 50%, 25%)72% minimum at 10% load Output cable 1.5 m 18AWG Output connector USB Type-C Input Voltage range 100 - 240 Vac (rated)96 - 264 Vac (operating) Frequency 50 / 60 Hz ± 3 Hz Current 0.5 A maximum Power consumption (no load) 0.075 W maximum Inrush current No damage shall occur, and the input fuse shall not blow Operating ambient temperature 0 - 40 °C

    € 9,95

    Leden identiek

  • Official EU Power Supply for Raspberry Pi 4 (white)

    Raspberry Pi Foundation Official EU Power Supply for Raspberry Pi 4 (white)

    The Raspberry Pi USB-C power supply is designed specifically to power the latest Raspberry Pi 4 Model B computers. The power supply features a USB-C cable and is available in four different models to suit different international power sockets, and in two colors. Specifications Output Output voltage +5.1 V DC Minimum load current 0 A Nominal load current 3.0 A Maximum power 15.3 W Load regulation ±5 % Line regulation ±2 % Ripple & noise 120 mVp-p Rise time 100 ms maximum to regulation limits for DC outputs Turn-on delay 3000 ms maximum at nominal input AC voltage and full load Protection Short circuit protectionOvercurrent protectionOver temperature protection Efficiency 81% minimum (output current from 100%, 75%, 50%, 25%)72% minimum at 10% load Output cable 1.5 m 18AWG Output connector USB Type-C Input Voltage range 100 - 240 Vac (rated)96 - 264 Vac (operating) Frequency 50 / 60 Hz ± 3 Hz Current 0.5 A maximum Power consumption (no load) 0.075 W maximum Inrush current No damage shall occur, and the input fuse shall not blow Operating ambient temperature 0 - 40 °C

    € 9,95

    Leden identiek

  • Official Micro-USB Power Supply for Raspberry Pi

    Raspberry Pi Foundation Official Micro-USB Power Supply for Raspberry Pi

    Official Micro-USB Power Supply for Raspberry Pi (12.5 W) Input: 100-240 VAC Output: 5.1 V / 2.5 A power supply Connector: micro USB Length: 1.5 m

    € 9,95

    Leden identiek

  • USB-A to USB-C Cable with ON/OFF Switch

    Kuongshun USB-A to USB-C Cable with ON/OFF Switch

    Features Type C cable USB type C is suitable for new version Raspberry Pi 4 No need to pull the cable to restart or reboot your Pi, just press the button to turn your Pi on and off Can be used as power supply for the Pi up to 2 Amp Help prevent the Pi's USB connector from wear and tear due to frequently pulling and inserting the USB cable Specifications Interface: USB Type C Current: 3 A Length: 1.5 m Use for: Raspberry Pi 4 Model B Packing List: 1x USB Type C power cable

    € 4,95

    Leden € 4,46

  • Officiële 27 W voeding voor Raspberry Pi 5 (EU, wit)

    Raspberry Pi Foundation Officiële 27 W voeding voor Raspberry Pi 5 (EU, wit)

    The Raspberry Pi 27 W PD USB-C power supply is designed specifically to power the Raspberry Pi 5. It is also capable of delivering 5 V/3 A, 9 V/3 A, 12 V/2.25 A, 15 V/1.8 A to PD-compatible products, making it a good and cost-effective power supply for many general applications, such as charging smartphones and tablets. Specifications Input 100-240 VAC Output 5 A @ 5.1 V, 3 A @ 9 V, 2.25 A @ 12 V, 1.8 A @ 15 V Connector USB-C Length 1.2 m Color White Region EU

    € 13,95

    Leden identiek

  • RTC-batterij voor Raspberry Pi 5

    Raspberry Pi Foundation RTC-batterij voor Raspberry Pi 5

    The power-management IC used on Raspberry Pi 5 integrates a real-time clock, and charging circuitry for a button cell which can power the clock while main power is disconnected. This Panasonic ML-2020 lithium manganese dioxide battery with a two-pin plug and a double-sided adhesive pad can be connected directly to the battery connector of the Raspberry Pi 5 and attached to the inside of a case or another convenient location.

    € 7,95

    Leden identiek

  •  -20% 5 V/2 A Micro-USB Voeding (EU)

    € 9,95€ 7,95

    Leden identiek

  •  -8% Raspberry Pi PoE+ HAT

    Raspberry Pi Foundation Raspberry Pi PoE+ HAT

    Niet op voorraad

    The Raspberry Pi PoE+ HAT is an add-on board for Raspberry Pi computers with PoE pins, including Raspberry Pi 3B+ and Raspberry Pi 4. It is used to power Raspberry Pi via an Ethernet cable, provided that power-sourcing equipment is installed on the Ethernet network. The HAT also includes a fan that will cool the Raspberry Pi processor.Features Fully isolated switched-mode power supply Fan control Technical Specifications Standard IEEE 802.3at-2003 PoE Input voltage 37–57 V DC, Class 4 device Output voltage 5 V DC/4 A Cooling 25 x 25 mm brushless fan delivering 2.2 CFM for processor cooling Operating temperature 0 °C to +50 °C

    Niet op voorraad

    € 24,95€ 22,95

    Leden identiek

  • StromPi 3 – Power Solution voor Single Board Computers

    JOY-iT StromPi 3 Power Solution voor Single Board Computers

    Met de StromPi 3 heeft JOY-iT nu het volgende uitbreidingsbord op de markt gebracht dat aan uw stroombehoefte zal voldoen. Met een spanningsbereik van 6-61 V en een stroom tot 3 A, kunnen zelfs grotere projecten van voldoende stroom worden voorzien. De afzonderlijke ingangen kunnen nu op verschillende manieren worden geprioriteerd, waardoor de StromPi 3 perfect aan uw project kan worden aangepast. Naast de reeds beschikbare spanningsingangen kan de nieuwe StromPi 3 nu worden aangevuld met een optionele plug-in batterij-unit die met een LiFePO4-batterij een oplaadbare noodstroombron toevoegt aan uw Raspberry Pi. Hierdoor behoren onverwachte stroomonderbrekingen tot het verleden! Daarnaast heeft de StromPi 3 nu ook zijn eigen configureerbare en autonoom werkende microsysteemunit, die gebruikt kan worden voor een programmeerbaar start-stop gedrag. Laat uw systeem op vooraf ingestelde tijden op en neer lopen om metingen uit te voeren of om apparaten aan en uit te schakelen (ook ideaal voor digital signage of machinebesturing). De RTC (real-time klok) in het microsysteem kan ook worden gebruikt om de werkende Raspberry Pi te synchroniseren zonder toegang tot internet. Met de nieuwe StromPi 3 bent u perfect toegerust voor allerlei projecten! Technische specificaties Voltage-ingang Micro-USB, breed bereik: 6-61 V Voltage uitgang 5 V, 3 A / RPi-PinHeader + USB Compatibel met Raspberry Pi (A+, B+, 2B, 3, 3B, 3B+, 4B), Banana Pi M2, via USB-uitgang: veel meer single board computers zoals Arduino, pcDuino, Red Pitaya en nog veel meer Optionele Uitbreidingen Inplugbaar batterijpakket (apart verkrijgbaar) met een 1000 mAh LiFePO4 batterij Microcontrollerbesturing Programmeermogelijkheid door prioriteit te geven aan de afzonderlijke ingangen in geval van nood (Power Path) Extra functies RTC real-time klok (programmeerbaar start/stop-gedrag), besturing via seriële interface (data-uitgang, besturing), optionele oplaadbare batterij wordt tijdens bedrijf direct opgeladen Afmetingen Afmetingen 55 x 54 x 20 mm Downloads Klik hier voor bijgewerkte handleidingen, scripts en nieuwe firmware >>

    € 69,95

    Leden € 62,96

  • USB-A to Micro USB-B Cable with Switch

    JOY-iT USB-A to Micro USB-B Cable with Switch

    USB-A to Micro USB-B power cable (power supply only) 1.5 m length with ON/OFF switch Add the ability to control the power to your USB-powered project simply by plugging a cable with a switch between the USB power port and the USB cable. There's no more need to pull the cable to restart or reboot your devices, just press the button to turn on and off, which helps to prevent the USB connector from wear and tear due to frequent pulling and inserting the USB cable. It can be used as a power supply up to 2 A. Not applicable for data transfer.

    € 4,95

    Leden € 4,46

  • Power Supply for Raspberry Pi Build HAT (48 W)

    Raspberry Pi Foundation Power Supply for Raspberry Pi Build HAT (48 W)

    This 48 W (8 VDC, 6 A) power supply is designed for the use with the Raspberry Pi Build HAT. Input: 110-240 VAC Output: 8 VDC, 6 A Cable: 1.5 m, 16 awg

    € 17,95

    Leden identiek

  • Official 27 W Power Supply for Raspberry Pi 5 (EU, black)

    Raspberry Pi Foundation Official 27 W Power Supply for Raspberry Pi 5 (EU, black)

    The Raspberry Pi 27 W PD USB-C power supply is designed specifically to power the Raspberry Pi 5. It is also capable of delivering 5 V/3 A, 9 V/3 A, 12 V/2.25 A, 15 V/1.8 A. to PD-compatible products, making it a good and cost-effective power supply for many general applications, such as charging smartphones and tablets. Specifications Input 100-240 VAC Output 5 A @ 5.1 V, 3 A @ 9 V, 2.25 A @ 12 V, 1.8 A @ 15 V Connector USB-C Length 1.2 m Color Black Region EU

    € 13,95

    Leden € 12,56

  • Waveshare PoE Ethernet/USB Hub Box for Raspberry Pi Zero (3x USB 2.0, 802.3af-Compliant)

    Waveshare Waveshare PoE Ethernet/USB Hub Box for Raspberry Pi Zero (3x USB 2.0, 802.3af-Compliant)

    Niet op voorraad

    The PoE-ETH-USB-Hub-Box is a Hub kit with PoE/ETH/USB Hub HAT inside. It is tailored for Raspberry Pi Zero series, small in size, each cut-out of the case is exactly aligned with the connector. The case adopts classic Raspberry Pi red/white color combination, with quality dull polish surface, effectively keeping the Zero away from dust. By using this small Hub Box and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi Zero in only one Ethernet cable, along with 3x extended USB ports. Features Designed for Raspberry Pi Zero, compatible with Zero series boards Incorporates RTL8152B Ethernet chip, with 10M / 100M auto-negotiation RJ45 port PoE (Power over Ethernet) feature, 802.3af-compliant Fully isolated SMPS (Switch Mode Power Supply) 3x extended USB ports, compatible with USB 2.0 / 1.1 Angle rounded design, smooth hand feeling, 'simple snap' case lid Quality ABS material, dull polish surface, anti-fingerprint Comes with two different lids, changing as you like Included 1x PoE/ETH/USB Hub HAT kit 1x ABS case 1x Rubber feet 4pcs 1x Screws pack Downloads Documentation

    Niet op voorraad

    € 29,95

    Leden € 26,96

  • Witty Pi 4 – Real-time Klok en Power Management voor Raspberry Pi

    Witty Pi 4 Real-time Klok en Power Management voor Raspberry Pi

    Witty Pi is een add-on bord dat realtime klok- en energiebeheer toevoegt aan uw Raspberry Pi. Het kan de ON/OFF-volgorde van uw Raspberry Pi bepalen, en het energieverbruik aanzienlijk verminderen. Witty Pi 4 is de vierde generatie van Witty Pi en het heeft deze hardware aan boord: In de fabriek gekalibreerde en temperatuurgecompenseerde realtime klok met ±2 ppm nauwkeurigheid. Eigen temperatuursensor met 0,125 °C resolutie. On-board DC/DC converter die tot 30 V DC accepteert. AVR 8-bit microcontroller (MCU) met 8 KB programmeerbare flash. Nauwkeurige real-time klok en aan/uit-schema De realtime klok (RTC) op Witty Pi 4 is in de fabriek gekalibreerd en de firmware van Witty Pi 4 maakt ook temperatuurcompensatie voor het kristal. Hierdoor is de RTC zeer nauwkeurig en is de werkelijke jaarlijkse fout beperkt tot ±2 ppm. Wanneer uw Raspberry Pi opstart, zal de tijd opgeslagen in de RTC de systeemtijd overschrijven. Hierdoor weet uw Raspberry Pi de juiste tijd, zelfs zonder toegang tot het internet. U kunt het opstarten en/of afsluiten van uw Raspberry Pi plannen, en er een tijdgestuurd apparaat van maken. U kunt zelfs een schema-script definiëren om een ingewikkelde aan/uit-sequentie voor uw Raspberry Pi te plannen. Het plannen van de aan/uit-volgorde voor Raspberry Pi is de populairste functie van Witty Pi, en het is erg handig voor systemen die gevoed worden door een batterij. Door Raspberry Pi alleen aan te zetten wanneer dat nodig is, kan de batterij veel langer meegaan als Witty Pi is geïnstalleerd. Temperatuur-gestuurd apparaat De temperatuursensor op Witty Pi 4 heeft een resolutie van 0,125 °C. De temperatuurgegevens worden gebruikt om het kristal te compenseren en de RTC nauwkeuriger te maken. U kunt ook de actie (opstarten of uitschakelen) specificeren wanneer de temperatuur boven of onder de vooraf ingestelde drempel komt. Dit betekent dat u van uw Raspberry Pi ook een temperatuurgestuurd apparaat kunt maken. DC/DC converter en e-latching power switch Witty Pi 4 wordt geleverd met een DC/DC converter aan boord, waarmee u uw apparaat kunt voeden met 6~30V voeding. U kunt uw apparaat ook van 5 V voorzien via de USB type C connector. Witty Pi 4 heeft ook een e-Latching aan/uit-schakelaar, die veel lijkt op de aan/uit-schakelaar op uw PC/Laptop computer. U kunt uw Raspberry Pi aan/uit zetten met een enkele tik op de knop. De software die op de achtergrond draait, voert het uitschakelcommando uit voordat de stroom wordt uitgeschakeld, dit voorkomt dat gegevens worden beschadigd door hard uitschakelen. Witty Pi 4 ondersteunt alle Raspberry Pi modellen die de 40-pins GPIO header hebben, inclusief A+, B+, 2B, Zero, Zero W, Zero 2 W, 3B, 3B+, 3A+ en 4B. U moet de 40-pins header van tevoren aan het Zero/Zero W/Zero 2 W model solderen, zodat ze een betrouwbare verbinding met Witty Pi kunnen maken. Een enkel I²C-apparaat Witty Pi 4 gebruikt MCU om een enkel I²C-apparaat met standaard adres 0x08 te emuleren, en mapt ook alle I²C-registers in realtime klok en temperatuursensor als virtuele I²C-registers in hetzelfde apparaat. U kunt alle I²C registers in de realtime klok en temperatuursensor benaderen via het enkele I²C apparaat dat door Witty Pi 4 wordt geëmuleerd. Het voordeel van dit nieuwe ontwerp is dat Witty Pi 4 andere I²C-apparaten (realtimeklok, temperatuursensor) verbergt en de proxy van hen wordt om met Raspberry Pi te praten. Omdat het door Witty Pi 4 gebruikte I²C-adres in elke waarde kan worden veranderd, kunt u altijd voorkomen dat het I²C-adres conflicteert. UWI ondersteuning Witty Pi 4 wordt volledig ondersteund door UWI (UUGear Web Interface), en u kunt toegang krijgen tot uw Witty Pi 4 op elk apparaat dat netwerk toegang heeft. Specificaties Microcontroller ATtiny841 (datasheet) Realtime klok PCF85063A (datasheet), gekalibreerd in fabriek Temperatuursensor Temperatuursensor LM75B (datasheet) DC/DC converter MP4462 (datasheet) MOSFET-schakelaar AO4616 (datasheet) Batterij Batterij CR2032 (voor het bijhouden van de tijd als de stroomvoorziening is onderbroken) Voeding In DC 5 V (via USB type C connector)of DC 6 V~30 V (via XH2.54 connector) Uitgangsstroom Tot 3 A voor Raspberry Pi en zijn randapparatuur Standby-stroom ~0.5 mA Bedrijfsomgeving Temperatuur -30°C~80°C (-22°F~176°F)Vochtigheid 0~80% RH, geen condensatie, geen corrosief gas Hoeveelheden afmeting 65 x 56 x 19 mm Gewicht 23 g (zonder accessoires) Inbegrepen 1x Witty Pi 4 bord 1x CR2032 batterij 4x M2.5 x 11mm Koperen Standoff 8x M2.5 schroeven Downloads Gebruikshandleiding GitHub

    € 44,95

    Leden € 40,46

  • JOY-iT Aluminium Case for StromPi 3

    JOY-iT JOY-iT Aluminium Case for StromPi 3

    Niet op voorraad

    Material: Aluminium Color: Matt black Compatible with: Raspberry Pi 2, 3 and 4 with attached StromPi 3 and Battery Hat Options of Mounting: DIN rail, M4 threaded holes on the bottom of the case Amounts of M4 threads: 4 Active cooling Low-profile heatsink and PCB for fan control and power button included Dimensions: 59 mm x 64 mm x 105 mm

    Niet op voorraad

    € 29,95

    Leden € 26,96

  • JOY-iT Extra Large Battery Pack for StromPi 3

    JOY-iT JOY-iT Extra Large Battery Pack for StromPi 3

    Nog 3 op voorraad

    This battery hat with LiFePO4 battery turns the StromPi V3 into a full-featured UPS solution. The replacement battery is provided as third current source, is surveilled and will be recharged automatically. With the doubling of the rated capacity, the lifespan is nearly twice as long as well in comparison to the 1000 mAh battery. It is based of the LiFePo4 technoloy and offers more essential advantages compared to the standard lithium-ION structures: increased security because there can not be a chemical spontaneous combustion a longer life time as lithium ION technology more charge cycles the battery gets automatically charged if it runs with a external voltage source In the battery electronic, protection circuits against overload, short-circuits and deep discharging are integrated. SPECIFICATIONS TYPE Lithium iron phosphate (LiFePO4) CAPACITY 2000 mAh VOLTAGE 3.2 V SPECIAL FEATURES directly attachable to the StromPi 3, will be charged immediately, pin header lead-through, own protection- and charge electronic, More Security: no chemical self ignition possible, Essentially longer Lifespan than Lithium-Ion technology DIMENSIONS 65 x 56 x 22 mm ITEMS SHIPPED Battery Pack EAN 4250236819891 ARTICLE NO. RB-StromPi3BAT-XL

    Nog 3 op voorraad

    € 49,95

    Leden € 44,96

  • Plug Adapter (US to EU)

    Plug Adapter (US to EU)

    Niet op voorraad

    Stekkeradapter (VS naar EU)

    Niet op voorraad

    € 2,95

    Leden € 2,66

  • Pimoroni Pico LiPo

    Pimoroni Pimoroni Pico LiPo

    Pimoroni Pico LiPo is powered and programmable via USB-C and comes with 16 MB of QSPI (XiP) flash. With the Qwiic/STEMMA QT connector you can hook up a whole host of different sensors and breakouts, and a debug connector for if you want to do your programming using a SWD debugger. There is an on/off button and a BOOTSEL button, which can also be used as a user switch.Pimoroni Pico LiPo also has onboard LiPo/LiIon battery management – the inbuilt charging circuitry means charging your battery is as easy as plugging your Pimoroni Pico Lipo in via USB. Two indicator LEDs connected to the battery circuit keep you informed of on/off state and charging status and it's compatible with any of our LiPo, LiIon and high capacity LiPo batteries.Programmable with C++, MicroPython or CircuitPython, Pimoroni Pico LiPo is the perfect powerhouse for your portable projects.Features Powered by RP2040 Dual ARM Cortex M0+ running at up to 133 Mhz 264 kB of SRAM 16 MB of QSPI flash supporting XiP MCP73831 charger with 215 mA charging current (datasheet) XB6096I2S battery protector (datasheet) USB-C connector for power, programming, and data transfer 4 pin Qw-ST (Qwiic / STEMMA QT) connector 3 pin debug connector (JST-SH) 2-pole JST PH battery connector, with polarity marked on the board Switch for basic input (doubles up as DFU select on boot) Power button Power, charging and user LED indicators On-board 3V3 regulator (max regulator current output 600mA) Input voltage range 3 - 5.5 V Compatible with Raspberry Pi Pico add-ons Measurements: approx 53 x 21 x 8 mm (L x W x H, including connectors) Downloads CircuitPython Getting started with CircuitPython guide

    € 19,95

    Leden € 17,96

  • PoE Splitter (5 V) – Power over Ethernet for Single Board Computers

    JOY-iT PoE Splitter (5 V) - Power over Ethernet for Single Board Computers

    Features Jack: 1x Micro USB power plug + 1x RJ45 output port Input Voltage: 36~57 V (standard PoE voltage 48 V, 52 V) Output Voltage: DC 5 V Output Current: 2 A Transmission Distance: 10~100 m PoE Protocol: IEEE802.3af Network Bandwidth: 10/100 Mbps Weight: 40 g Product Dimension: 82 x 28 x 23 mm Cable Length: 205 mm Operation Temperature: -50 °C up to +75 °C

    € 16,95

    Leden € 15,26

  • Official 27 W Power Supply for Raspberry Pi 5 (UK, white)

    Raspberry Pi Foundation Official 27 W Power Supply for Raspberry Pi 5 (UK, white)

    The Raspberry Pi 27 W PD USB-C power supply is designed specifically to power the Raspberry Pi 5. It is also capable of delivering 5 V/3 A, 9 V/3 A, 12 V/2.25 A, 15 V/1.8 A to PD-compatible products, making it a good and cost-effective power supply for many general applications, such as charging smartphones and tablets. Specifications Input 100-240 VAC Output 5 A @ 5.1 V, 3 A @ 9 V, 2.25 A @ 12 V, 1.8 A @ 15 V Connector USB-C Length 1.2 m Color White Region UK

    € 13,95

    Leden identiek

  • Battery Unit for StromPi 3

    JOY-iT Battery Unit for StromPi 3

    Nog 3 op voorraad

    StromPi sends you an e-mail when his backup battery is flat! Technical details Battery type Lithium iron phosphate (LiFePO4) Capacity 1000 mAh Voltage 3.2 V Features Can be plugged directly to the StromPi 3 Charges immediately on StromPi 3 Own protection circuitry Own charging electronics Increased safety, as chemical self-ignition is not possible Significantly longer life than lithium-ion technologies Wide operating temperature range To our customers residing outside Europe: This product is prohibited from shipment by air!

    Nog 3 op voorraad

    € 34,95

    Leden € 31,46

  • Bijna uitverkocht Solar Panel 6 W for PiJuice

    Pi Supply Solar Panel 6 W for PiJuice

    Nog 2 op voorraad

    Features Portability - a 6 W panel that folds down into a super compact size. Easy to pack up and go Easily mountable - metal eye-holes in each corner (4 total) allow easy attachment to backpacks, trees, or tents Water resistant up to IPX4 rating One Regulated 5v/1A USB output - it works with your PiJuice, smartphones, tablets, audio players and more! Features SunPower solar panels which provide an industry-leading solar conversion efficiency Specification Solar panel - 5.5 V / 6 W Regulated Max output - 5 V / 5 W Single USB max output - 5 W Built-in smart-power chip Folded dimensions - 16.3 cm x 15.6 cm x 2.5 cm Unfolded dimensions - 32.8 cm x 15.6 cm x 2.4 cm Weight - 320 g CE and FCC tested Includes PiJuice Solar Panel - 6 W USB to microUSB Cable User Manual

    Nog 2 op voorraad

    € 49,95

    Leden € 44,96

Officiële Raspberry Pi voeding

Met de krachtige en veelzijdige Raspberry Pi heb jij een single-board computer. Deze kun je voor een breed scala aan toepassingen inzetten, zolang deze maar van stroom voorzien is. De voeding voor jouw single-board computer is stap 1 naar het uiteindelijk kunnen gebruiken van jouw Raspberry.

Deze categoriepagina biedt je alle informatie die je nodig hebt over Raspberry Pi-voedingen, zodat je er zeker van kunt zijn dat je apparaat de juiste stroom krijgt.

We gaan in op de verschillende soorten Raspberry Pi-voedingen die beschikbaar zijn, hoe je de juiste kiest voor je apparaat en de voordelen en nadelen van elke optie. We geven ook tips over hoe je je Raspberry Pi-voeding kunt onderhouden en oplossen om een optimale prestatie te garanderen.

Soorten Raspberry Pi-voedingen

Er zijn twee opties om jouw Pi van stroom te voorzien en te voeden.

MicroUSB-voedingen voor Raspberry Pi

Dit is de meest voorkomende manier van stroomvoorziening. Met een Micro USB-kabel verbind je jouw Pi aan een laptop of muuradapter. Deze voeding is meestal klein en licht, en makkelijk aan te sluiten op je apparaat. Het nadeel van dit type voeding is dat ze niet voldoende stroom leveren voor het zware werk met veeleisende toepassingen.

AC-adapter voedingen voor Raspberry Pi

AC-adapters zijn ideaal voor het leveren van een betrouwbare stroomvoorziening voor je Raspberry Pi. Dit type voeding is meestal groter en zwaarder dan Micro USB-voedingen, maar je hebt een consistente stroomoutput.

Hoe kies je de juiste Raspberry Pi-voeding

Voordat je een product besteld om jouw Pi te voeden is het goed om stil te staan bij de toepassingen die je voor ogen hebt. Zorg ervoor dat de voeding die je kiest past bij de stroomuitgang die het product kan leveren. Overweeg ook de grootte en het gewicht van de voeding.

Onderhouds- en probleemoplossingstips

Langer genieten van jouw Raspberry Pi doe je door regelmatig onderhoud en controles uit te voeren. Denk bijvoorbeeld aan het schoonmaken van de contacten. Zo komt de elektrische verbinding nooit in het gedrang. Een andere praktische tip is om de spanning van de voeding te controleren op stabiliteit. Daarnaast zorg je ervoor dat de voeding niet te warm wordt want een te warme voeding kan problemen opleveren.

Koop je Raspberry Pi voeding bij Elektor

Elektor is dé specialist op gebied van hobby-elektronica in Nederland. Met ons grote assortiment ben je vrijwel verzekerd dat je kunt vinden waar je naar zoekt, aangeboden voor een scherpe prijs! Vanaf € 100,- betaal je bovendien geen verzendkosten. Bestel de nieuwe voeding voor je Raspberry Pi vandaag nog!

Login

Wachtwoord vergeten?

Heb je nog geen account?
Maak account aan