Raspberry Pi Kits

31 producten


  •  -20% Raspberry Pi Pico Experimenteerbundel

    Elektor Bundles Raspberry Pi Pico Experimenteerbundel

    The project book, written by well-known Elektor author Dogan Ibrahim, is an introduction to using the Raspberry Pi Pico Experimenting Kit. The kit is based on the Raspberry Pi Pico processor and includes several on-board as well as external sensors, and an actuator. The kit is programmed using the MicroPython programming language. The Thonny development environment (IDE) is used in all the projects in the book. All the projects given in the book have been fully tested and are working. No prior programming or electronic experience are required to follow the projects.The book’s fully evaluated projects feature all the supplied components. Each project includes a block diagram, a circuit diagram, a full program listing, and a complete program description.Included in the bundle Raspberry Pi Pico RP2040 Pico Expansion Board 1.44-inch TFT LCD with ST7735 driver 3x Pushbutton input 3x LED output 1x Active buzzer 6x Interfaces (UART/GPIO/I²C/ADC) Grove-compatible Powered by Micro-USB 8 Modules MPU6050 6-axis IMU DHT11 humidity & temperature sensor 10 A relay SG90 servo Slide potentiometer Serial-to-WiFi (ESP8266) module Ultrasonic range sensor 8-bit RGB addressable LED (WS2818) module Project book (178 pages) 42 Projects in the BookBoard-Hardware-Based Projects Flashing an on-board LED Flashing SOS Flashing LED – using a timer Alternately flashing LEDs Pushbutton control Changing the LED flashing rate using pushbutton interrupts Binary counting LEDs Randomly flashing yellow, green, and blue LEDs Chasing LEDs Reaction timer Buttons and LEDs The TFT Display Second counter Event counter Reaction timer Display LED and button status Temperature and humidity – display in Thonny window Temperature and humidity – LED output Temperature and humidity – display on TFT ON/OFF temperature control ON/OFF temperature control – setting the desired temperature Voltmeter Changing the brightness of an LED Ultrasonic distance measurement - display in Thonny window Ultrasonic distance measurement - display on TFT Height of a person (stadiometer) Ultrasonic reverse-parking aid with buzzer Ultrasonic liquid level controller Melody maker Servo motor control Accurate servo motor control WS2812 LED strip light show - state machine approach WS2812 LED strip light show – using the neopixel library WS2812 LED strip show – another neopixel library example Displaying 3 dimensions of acceleration A car’s maximum acceleration – using the TFT display Level display using the gyroscope MPU6050 temperature display TFT display test TFT bitmap display Using the WiFi Connect to the local Wi-Fi network and display the IP address Controlling an LED from a smartphone using Wi-Fi Displaying the temperature on a smartphone using Wi-Fi

    € 74,95€ 59,95

    Leden identiek

  •  -14% Raspberry Pi 5 Ultimate Starter Kit (8 GB)

    Elektor Bundles Raspberry Pi 5 Ultimate Starter Kit (8 GB)

    Bespaar meer dan € 25 met deze startersset in vergelijking met het los kopen! This Raspberry Pi 5 Ultimate Starter Kit includes everything you need to get started right away with the latest version of the world's most popular mini computer as a development and multimedia device. Kit Contents Raspberry Pi 5 (8 GB RAM)The new Raspberry Pi 5 delivers more performance than ever before. Thanks to the faster CPU, GPU and RAM, Raspberry Pi 5 is up to 3x faster than its already fast predecessor. 64-bit quad-core ARM Cortex-A76 processor (2.4 GHz) VideoCore VII GPU (800 MHz) 8 GB of LPDDR4X RAM (4267 MHz) Raspberry Pi silicon RP1 I/O controller chip Real-time clock On/off button PCIe 2.0 UART connector Fan connector Official 27 W Power Supply for Raspberry Pi 5 (EU, white)The official Raspberry Pi 27 W PD USB-C power supply is designed specifically to power the Raspberry Pi 5. microSD Card pre-installed with Raspberry Pi OS (32 GB)With this microSD (32 GB, Class 10) with pre-installed Raspberry Pi OS you can start using your Raspberry Pi right away. Official Case for Raspberry Pi 5 (white/red)The Raspberry Pi 5 case offers improved thermal features to support the higher peak power consumption of the Raspberry Pi 5. Active Cooler for Raspberry Pi 5The active cooler provides an alternative cooling solution for users who wish to use their Raspberry Pi 5 under sustained heavy load without a case. Official HDMI Cable for Raspberry Pi (white, 1 m)The official Raspberry Pi micro-HDMI to HDMI (A/M) cable (white, 1 m) is designed for the Raspberry Pi. FPC Camera Cable for Raspberry Pi 5 (200 mm)With this cable you can connect your current Raspberry Pi camera products to the Raspberry Pi 5. FPC Display Cable for Raspberry Pi 5 (200 mm)With this cable you can connect your current Raspberry Pi display products to the Raspberry Pi 5. Book: Raspberry Pi 5 Essentials – Program, build, and master over 60 projects with Python This 322-page book (written by the best-selling author Dogan Ibrahim) starts with an introduction to the Raspberry Pi 5 computer and covers the important topics of accessing the computer locally and remotely. Use of the console language commands as well as accessing and using the desktop GUI are described with working examples. The remaining parts of the book cover many Raspberry Pi 5-based hardware projects using components and devices such as LEDs and buzzers, LCDs, Ultrasonic sensors, Temperature and atmospheric pressure sensors, The Sense HAT, Camera modules.

    € 185,50€ 159,95

    Leden identiek

  •  -20% Raspberry Pi Pico Experimentier-Bundle

    Elektor Bundles Raspberry Pi Pico Experimentier-Bundle

    Das Projektbuch – geschrieben von Dogan Ibrahim – ist eine Einführung in die Verwendung des Raspberry Pi Pico Experimenting Kits. Das Kit basiert auf dem Raspberry Pi Pico-Prozessor und enthält mehrere integrierte sowie externe Sensoren und einen Aktuator. Das Kit wird mit der Programmiersprache MicroPython programmiert. Die Thonny-Entwicklungsumgebung (IDE) wird in allen Projekten des Buchs verwendet. Es sind keine Programmier- oder Elektronikkenntnisse erforderlich, um den Projekten zu folgen. Die in diesem Buch vorgestellten Projekte sind vollständig getestet und funktionsfähig und verwenden alle mitgelieferten Komponenten. Für jedes Projekt im Buch gibt es ein Blockdiagramm, einen Schaltplan, ein vollständiges Programmlisting und eine komplette Programmbeschreibung. Lieferumfang des Kits Raspberry Pi Pico RP2040 Pico-Erweiterungs-Board 1,44' TFT LCD mit ST7735-Treiber 3x Taster-Eingang 3x LED-Ausgang 1x Aktiv-Summer 6x Schnittstelle (UART/GPIO/I²C/ADC) Grove-kompatibel Stromversorgung über Micro-USB 8 Module MPU6050 6-Achsen IMU DHT11 Feuchtigkeits- & Temperatursensor 10 A Relais SG90 Servo Schiebe-Potentiometer Seriell-zu-WiFi-Modul (ESP8266) Ultraschall-Abstandssensor 8-bit RGB-adressierbares LED-Modul (WS2818) Projektbuch (Deutsch, 184 Seiten) 42 Projekte im Buch Board-Hardware-basierte Projekte Blinken einer integrierten LED Blinkendes SOS Blinkende LED – mit einem Timer Abwechselnd blinkende LEDs Drucktastensteuerung Ändern der LED-Blinkrate mit Drucktasten-Interrupts Binäre Zähl-LEDs Zufällig blinkende gelbe, grüne und blaue LEDs LEDs jagen Reaktionstimer Tasten und LEDs Das TFT-Display Sekundenzähler Ereigniszähler Reaktionstimer LED- und Tastenstatus anzeigen Temperatur und Luftfeuchtigkeit – Anzeige im Thonny-Fenster Temperatur und Luftfeuchtigkeit – LED-Ausgang Temperatur und Luftfeuchtigkeit – Anzeige auf TFT EIN/AUS-Temperaturregelung EIN/AUS-Temperaturregelung – Einstellen der gewünschten Temperatur Voltmeter Helligkeit einer LED ändern Ultraschall-Entfernungsmessung - Anzeige im Thonny-Fenster Ultraschall-Entfernungsmessung - Anzeige auf TFT Höhe einer Person (Stadiometer) Ultraschall-Einparkhilfe mit Summer Ultraschall-Füllstandsregler Melodiemacher Servomotorsteuerung Präzise Servomotorsteuerung WS2812 LED-Streifen-Lichtshow – State-Machine-Ansatz WS2812 LED-Streifenlichtshow – mit der Neopixel-Bibliothek WS2812 LED Strip Show – ein weiteres Beispiel für eine Neopixel-Bibliothek Anzeige von 3 Dimensionen der Beschleunigung Die maximale Beschleunigung eines Autos – am TFT-Display Pegelanzeige mit dem Gyroskop MPU6050 Temperaturanzeige TFT-Display-Test TFT-Bitmap-Anzeige WLAN verwenden Verbinden Sie sich mit dem lokalen Wi-Fi-Netzwerk und zeigen Sie die IP-Adresse an Steuerung einer LED von einem Smartphone über Wi-Fi Anzeige der Temperatur auf einem Smartphone über Wi-Fi

    € 74,95€ 59,95

    Leden identiek

  • Zandklok kit (gebaseerd op de Raspberry Pi Pico)

    Elektor Labs Zandklok kit (gebaseerd op de Raspberry Pi Pico)

    Een op de Raspberry Pi Pico gebaseerde Eye Catcher Een standaard zandklok laat meestal slechts zien hoe de tijd verstrijkt. Deze door een Raspberry Pi Pico aangestuurde zandklok toont daarentegen de exacte tijd door de vier cijfers voor uren en minuten in een zandlaag te "graveren". Na een vooraf ingestelde periode wordt het zand door twee trilmotoren vlak getrild en begint alles weer van voren af aan. Het hart van de zandklok wordt gevormd door twee servomotoren, die via een pantograafmechanisme een schrijfpen aandrijven. Een derde servomotor tilt deze pen op en neer. Het zandbakje is voorzien van twee trilmotoren om het zand weer vlak te trillen. Het elektronische deel van de zandklok bestaat uit een Raspberry Pi Pico en een RTC/driverbord met een real-time klok, plus drivercircuits voor de servomotoren. Een gedetailleerde bouwhandleiding is beschikbaar via download. Kenmerken Afmetingen: 135 x 110 x 80 mm Bouwtijd: ca. 1,5 tot 2 uur Inbegrepen 3x Voorgesneden acrylaatplaten met alle mechanische onderdelen 3x Mini servomotoren 2x Trilmotoren 1x Raspberry Pi Pico 1x RTC/driverkaart met geassembleerde onderdelen Moeren, boutjes, afstandhouders en draden voor de montage Fijnkorrelig wit zand

    € 62,95

    Leden € 56,66

  •  -33% Raspberry Pi T-Type Kit

    Kuongshun Raspberry Pi T-Type Kit

    Features Suitable for Raspberry Pi + GPIO Extension Board Exquisite appearance DIY operation Specifications Size of GPIO Extension Board: 7.5 x 6 cm (3 x 2.4') Size of Breadboard: 16.5 x 5.5 x 1 cm (6.5 x 2.2 x 0.4') Included 1x GPIO Extension Board 1x Breadboard 1x 40P Pin Connect Line 8x 1K Resistor 8x 10K Resistor 4x LED (yellow) 4x LED (red) 4x Key 10x 25 mm Jumper Wires A 10x 25 mm Jumper Wires B

    € 14,95€ 9,95

    Leden identiek

  •  -25% Electronics Fans Package – Component Basic Starter Kit

    Kuongshun Electronics Fans Package - Component Basic Starter Kit

    Contents 1x High Quality Retail Box 10x 1/4W 1% 100R Resistor 10x 1/4W 1% 220R Resistor 10x 1/4W 1% 330R Resistor 10x 1/4W 1% 1K Resistor 10x 1/4W 1% 10K Resistor 10x 1/4W 1% 100K Resistor 10x 1/4W 1% 4.7K Resistor 10x 1/4W 1% 47K Resistor 10x 100PF Ceramic Capacitor 10x 10NF Ceramic Capacitor 10x 100NF Ceramic Capacitor 10x 22PF Ceramic Capacitor 10x 10UF aluminum electrolytic capacitor 10x 470UF aluminum electrolytic capacitor 10x Red LED 10x Green LED 10x Yellow LED 10x Blue LED 8x 12x12x7.3 Switch 2x Red Cap 2x Yellow Cap 2x Green Cap 2x Blue Cap 1x 10K Precision Potentiometer 2x RGB LED 1x Active Buzzer 1x Passive Buzzer 1x Pin Header 1x40 1x Resistor Card 1x 400pts Breadboard 1x 30pcs/pack Breadboard Jumper Wires Set

    € 19,95€ 14,95

    Leden identiek

  • Bijna uitverkocht Raspberry Pi 400 Kit – Raspberry Pi 4-gebaseerde PC Kit (EU)

    Raspberry Pi Foundation Raspberry Pi 400 Kit - Raspberry Pi 4-gebaseerde PC Kit (EU)

    2 reviews

    Nog 1 op voorraad

    Specificaties (Raspberry Pi 400) Processor Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.8 GHz RAM 4 GB LPDDR4-3200 Connectivity Dual-band (2.4 GHz and 5.0 GHz) IEEE 802.11b/g/n/ac wireless LANBluetooth 5.0, BLEGigabit Ethernet2 × USB 3.0 and 1 × USB 2.0 ports GPIO Horizontal 40-pin GPIO header Video & Sound 2 × micro HDMI ports (supports up to 4Kp60) Multimedia H.265 (4Kp60 decode)H.264 (1080p60 decode, 1080p30 encode)OpenGL ES 3.0 graphics SD card support MicroSD card slot for operating system and data storage Keyboard US keyboard Power 5 V DC via USB connector Operating temperature 0°C to +40°C Dimensions 286 × 122 × 23 mm (maximum) Inhoud van de kit Raspberry Pi 400 (US layout, QWERTY) Officiële EU voedingsadapter (5,1 V/3 A) voor Raspberry Pi 4 (wit) Officiële Raspberry Pi muis (wit/rood) Officiële HDMI-kabel voor Raspberry Pi 4 (wit, 1 m) microSD-kaart (16 GB, Class 10) met SD-adapter (met voorgeïnstalleerde NOOBS) The Official Raspberry Pi Beginner's Guide (4th Edition)

    Nog 1 op voorraad

    € 109,95

    Leden € 98,96

  •  -16% Raspberry Pi 5 Ultimate Starter Kit (4 GB)

    Elektor Bundles Raspberry Pi 5 Ultimate Starter Kit (4 GB)

    Bespaar meer dan € 25 met deze starterkit in vergelijking met het los kopen! This Raspberry Pi 5 Ultimate Starter Kit includes everything you need to get started right away with the latest version of the world's most popular mini computer as a development and multimedia device. Kit Contents Raspberry Pi 5 (4 GB RAM)The new Raspberry Pi 5 delivers more performance than ever before. Thanks to the faster CPU, GPU and RAM, Raspberry Pi 5 is up to 3x faster than its already fast predecessor. 64-bit quad-core ARM Cortex-A76 processor (2.4 GHz) VideoCore VII GPU (800 MHz) 4 GB of LPDDR4X RAM (4267 MHz) Raspberry Pi silicon RP1 I/O controller chip Real-time clock On/off button PCIe 2.0 UART connector Fan connector Official 27 W Power Supply for Raspberry Pi 5 (EU, white)The official Raspberry Pi 27 W PD USB-C power supply is designed specifically to power the Raspberry Pi 5. microSD Card pre-installed with Raspberry Pi OS (32 GB)With this microSD (32 GB, Class 10) with pre-installed Raspberry Pi OS you can start using your Raspberry Pi right away. Official Case for Raspberry Pi 5 (white/red)The Raspberry Pi 5 case offers improved thermal features to support the higher peak power consumption of the Raspberry Pi 5. Active Cooler for Raspberry Pi 5The active cooler provides an alternative cooling solution for users who wish to use their Raspberry Pi 5 under sustained heavy load without a case. Official HDMI Cable for Raspberry Pi (white, 1 m)The official Raspberry Pi micro-HDMI to HDMI (A/M) cable (white, 1 m) is designed for the Raspberry Pi. FPC Camera Cable for Raspberry Pi 5 (200 mm)With this cable you can connect your current Raspberry Pi camera products to the Raspberry Pi 5. FPC Display Cable for Raspberry Pi 5 (200 mm)With this cable you can connect your current Raspberry Pi display products to the Raspberry Pi 5. Book: Raspberry Pi 5 Essentials – Program, build, and master over 60 projects with Python This 322-page book (written by the best-selling author Dogan Ibrahim) starts with an introduction to the Raspberry Pi 5 computer and covers the important topics of accessing the computer locally and remotely. Use of the console language commands as well as accessing and using the desktop GUI are described with working examples. The remaining parts of the book cover many Raspberry Pi 5-based hardware projects using components and devices such as LEDs and buzzers, LCDs, Ultrasonic sensors, Temperature and atmospheric pressure sensors, The Sense HAT, Camera modules.

    € 160,50€ 134,95

    Leden identiek

  • 4tronix M.A.R.S. Rover Robot Kit voor Raspberry Pi Zero

    4tronix M.A.R.S. Rover Robot Kit voor Raspberry Pi Zero

    Geïnspireerd door NASA's Mars rovers Curiosity en Perseverance is de M.A.R.S. Rover van 4tronix een autonoom voertuig dat ontworpen is om op ruw terrein rond te rijden, maar dan op Aarde. Hij heeft dezelfde differentiele arm, tuimelarmen en draaistellen. M.A.R.S. is een acroniem voor 'Mobile Autonomous Robotic System'.Kenmerken 6 Motoren: 80 rpm 6 V, N20 micro-aandrijfmotoren 4 Servo's: MG90S analoge micro-aandrijf servo's met metalen tandwielen 4 FireLEDs Ultrasone afstandssensor op bestuurbare mast Totaal aantal speciale printplaten: 30 Aantal verschillende PCB-ontwerpen: 11 Lengte: 200 mm Breedte: 185 mm Hoogte met mast: 170 mm Gewicht exclusief Raspberry Pi Zero en batterijen: 460 gram Er is een Python-bibliotheekmodule beschikbaar voor de Raspberry Pi Zero waarmee het apparaat gemakkelijk kan worden bediend.Benodigdheden Raspberry Pi Zero 4 oplaadbare AA batterijen Downloads Montage van de 4tronix M.A.R.S. Rover kit Programmeren M.A.R.S. Rover op de Raspberry Pi Zero Codering met behulp van Microsoft Makecode op GitHub

    € 184,95

    Leden € 166,46

  • Basic Kit for Raspberry Pi Pico (Pico included)

    Kuongshun Basic Kit for Raspberry Pi Pico (Pico included)

    Contents Raspberry Pi Pico RP2040 Development Board 30 cm Micro:bit flat USB cable for Smart Car 10-Pin Male to Female Dupont Line Three-leaf Fan Blue Motor Bracket with Screw 3 V DC motor with wire ULN2003 Driver Board Stepper Motor Green 28 mm Leg LED 5 mm Red (1pcs) 28 mm Leg LED 5 mm Green (1pcs) 28 mm Leg LED 5 mm Yellow (1pcs) 28 mm Leg LED 5 mm Blue (1pcs) Resistor 220R 1/4W 1% (1pcs) 400 Points Soldless Breadboard Infrared Obstacle Avoidance Tracking Sensor Module Active Alarm Buzzer Driver Module Low Current Blue 7 Color Flashing LED Module Tachile Switch Module

    € 34,95

    Leden € 31,46

  • MonkMakes Air Quality Kit for Raspberry Pi

    MonkMakes MonkMakes Air Quality Kit for Raspberry Pi

    Niet op voorraad

    The board has a display of six LEDs (green, orange and red) that display the air quality and a buzzer. Temperature and air quality readings can be read by your Raspberry Pi, and the buzzer and LED display can also be controlled from your Raspberry Pi. The Air Quality Sensor board plugs directly into the back of a Raspberry Pi 400, but, can also be used with other models of Raspberry Pi, using the jumper wires and GPIO template included in the kit. It uses the CCS811 VOC sensor IC and a TMP235 temperature sensor. It also has a rudimentary display and a buzzer. It also uses a bi-directional UART interface to communicate with the Pi. The Air Quality Sensor board is designed for use with the Raspberry Pi 400 but also works with other models of Raspberry Pi using the jumper wires included in the kit. Downloads Instructions Datasheet

    Niet op voorraad

    € 29,95

    Leden € 26,96

  • Official Raspberry Pi 4 Desktop Kit (EU)

    Raspberry Pi Foundation Official Raspberry Pi 4 Desktop Kit (EU)

    This 'All in One' Raspberry Pi 4 Desktop Starterkit contains all official parts and allows an easy and quick start! Raspberry Pi 4 Desktop Kit contains: Raspberry Pi US Keyboard & Mouse 2x micro HDMI to Standard HDMI cable (A/M) 1 m Raspberry Pi 15.3 W USB-C Power Supply (EU version) Raspberry Pi 4 Case Official Raspberry Pi Beginner's Guide (English language) 16 GB NOOBS with Raspbian microSD card Raspberry Pi 4 B is NOT included.

    € 79,95

    Leden € 71,96

  • SmartPi 3.0 Smart Meter for Raspberry Pi (Bundle)

    enerserve SmartPi 3.0 Smart Meter for Raspberry Pi (Bundle)

    Niet op voorraad

    De Smart Pi 3.0 uitbreidingsmodule breidt de Raspberry Pi uit met interfaces om spanning en stroom op een contactloze manier te meten. Hij biedt de mogelijkheid om het verbruik van elektriciteit in de gaten te houden, en maakt van de Raspberry Pi een volledig uitgeruste slimme meter. Alle meetgegevens kunnen worden opgeslagen, en zijn toegankelijk via het lokale netwerk of internet voor inzage. Stroom wordt contactloos gemeten met behulp van inductieve stroomsensoren. In de standaardversie kunnen stromen tot 100 A worden gemeten. Het eenvoudig omschakelen van de jumper maakt de aansluiting van elke kabelomvormer met een secundaire stroom van 1 A mogelijk. Hierdoor kunnen stromen tot 1000 A en meer worden gemeten. De SmartPi 3.0 heeft 3 ingangen voor stroommetingen (L1, L2, L3) en drie ingangen voor spanningsmetingen. Dit maakt metingen op alle drie de fasen en zelfs de neutrale geleider mogelijk. De SmartPi 3.0 en de Raspberry Pi kunnen worden gevoed via de spanningsingang. Een externe voeding is niet nodig. Indien de spanningsmeter is aangesloten kan de richting van de stroom worden bepaald en is de SmartPi een volwaardige bidirectionele slimme meter. Metingen Stroom Spanning Vermogen Actief vermogen Reactief vermogen Schijnbaar vermogen Energieverbruik Energieopwekking Vermogensgebruik Vermogensproductie Vermogensfrequentie Cos Phi De interfaces met de Raspberry Pi zijn elektrisch geïsoleerd om maximale veiligheid te garanderen. Website en REST interface De open source software hiervoor is geschreven in Go en bevat alle benodigde drivers, een webserver met webpagina, en een REST interface. Alle meetgegevens kunnen worden geregistreerd en weergegeven op een tablet of een smartphone. De REST interface maakt het mogelijk om de SmartPi te integreren in zelfgemaakte applicaties en apps. Toepassingsvoorbeelden voor de SmartPi Energiemonitor via netwerk en internet Bewaking van de vermogensfrequentie Vermogensmonitor Alarmen voor de gebruikers van de elektriciteit Alarmen bij verhoogd verbruik Integratie in energiebeheersystemen Kostenbeheersing Softwarefuncties Het uitlezen van stroom, spanning, vermogen en vele andere gegevens Opslaan van de meetwaarden in de database MQTT-ondersteuning Prometheus-ondersteuning (nog niet gedocumenteerd) CSV upload via FTP Webinterface voor weergave en configuratie Ondersteuning voor UMTS Kenmerken/specificaties Raspberry Pi compatibele connector Raspberry Pi compatibele afmeting Galvanische isolatie Geïntegreerde voeding vanaf het spannings-meetpad via vaste aansluitingen Open source stuurprogramma en API Stroommeting op 3-fase + neutrale geleider Aansluiting voor inductieve stroomsensoren met een secundaire uitgang van 50 mA, 333 mA en 1 A Schroefklemmen voor aansluiting van de stroom- en spanningsmeting Compatibiliteit met alle Raspberry Pi modellen Gebufferde RTC (de Raspberry Pi blijft werken, zelfs zonder internetverbinding na een stroomstoring) Extra status LED Solide behuizing met DIN-rail montage Inhoud van de verpakking 1x SmartPi 3 uitbreidingsmodule 3x Stroom probe (100 A, 50 mA) 1x behuizing voor Raspberry Pi 4 Links Installation Forum GitHub

    Niet op voorraad

    € 199,95

    Leden € 179,96

  • Bijna uitverkocht Joy-Pi Note – 11,6` Raspberry Pi 4-gebaseerde Notebook

    JOY-iT Joy-Pi Note - 11,6" Raspberry Pi 4-gebaseerde Notebook

    Nog 1 op voorraad

    3-in-1 toepassing: Notebook, Leerplatform en Experimenteercentrum De Joy-Pi Note is het nieuwe vlaggenschip in de Joy-Pi familie. Met zijn 11.6' IPS scherm en een afneembaar, draadloos toetsenbord, brengt hij het basisconcept van de Joy-Pi in een nieuw, hoogwaardig en aantrekkelijk formaat. Met 46 cursussen en 18 projecten is de Joy-Pi Note niet alleen geschikt als experimenteercentrum, maar ook ideaal voor gebruik in het onderwijs. Met meer dan 22 geïntegreerde sensoren en modules zijn er geen grenzen aan het eigen plezier van de gebruiker om te experimenteren. Dit vereenvoudigt de kennismaking met elektrotechniek en met het programmeren. Dankzij het ingebouwde leerplatform, dat speciaal voor de Joy-Pi Note ontwikkeld werd, kunnen de geïnstalleerde onderdelen onafhankelijk van iemands eigen voorkennis bediend en aangeleerd worden. Het is ook mogelijk om via de pinnen van de Raspberry Pi, die naar buiten geleid worden, extra sensoren en modules aan te sluiten en zo ook complexere projecten uit te voeren. Natuurlijk kan de Joy-Pi Note ook gebruikt worden als een 'klassiek' notebook. Alle programma's die compatibel zijn met de Raspberry Pi 4 kunnen geïnstalleerd worden. De geïntegreerde 2 MP camera maakt bijvoorbeeld ook videoconferencing mogelijk. Alle Raspberry Pi 4 modellen kunnen gebruikt worden (we raden 4 GB RAM of hoger aan). Aan de onderkant van het apparaat vind je een vakje waar je een powerbank in kunt plaatsen om ook de Joy-Pi Note mobiel te kunnen gebruiken.. Specificaties Belangrijkste kenmerken Beeldscherm 11.6' 1920x1080 IPS LCD Camera 2 MP Speciale kenmerken Volledig uitgeruste set, volledig geïntegreerd experimenteercentrum, voorgeïnstalleerd leerplatform, afneembaar draadloos toetsenbord, geïntegreerd vak voor powerbank & accessoires Praktijklessen van het leerplatform 46 cursussen & 18 projecten voor Python en Scratch Stroomvoorziening 12 V holle stekker, 5 V USB Compatibel met Raspberry Pi 4 (4 GB en 8 GB RAM) Keyboard layouts DE (standaard) + US, UK, FR, IT, PT en Nordic Afmetingen 291 x 190 x 46 mm Gewicht 1,3 kg Meegeleverde sensoren, modules & accessoires Display 7-segment display, 16x2 LCD module, 8x8 RGB Matrix Sensors DHT11 temperatuur- en luchtvochtigheidssensor, kantelsensor, bewegingssensor, geluidssensor, aanraaksensor, RFID module, lichtsensor, ultrasone afstandssensor Motors Servo interface, stappenmotor interface, vibratiemotor Besturing Joystick, 4x4 knoppenmatrix, Raspberry Pi & PCB verbindingsschakelaar, bewegingssensor, gevoeligheidsregelaar, geluidssensor gevoeligheidsregelaar, 16x2 LCD module helderheidsregelaar Overige Relais, ventilator, GPIO uitbreiding, GPIO LED indicator, breadboard, IO/ADC/I²C/UART uitbreidingsinterface, infraroodsensor interface, zoemer, display driver Accessories RFID chip, RFID kaart, 12 V voeding, servo motor, stappenmotor, infrarood ontvanger, infrarood afstandsbediening, gelijkstroommotor met ventilatorbevestiging, HDMI aansluiting, schroevendraaier, microSD kaart (32 GB), SD kaartlezer, elektronische accessoires, draadloze muis, draadloos toetsenbord Inbegrepen Joy-Pi Note Accessories Korte handleiding Benodigdheden Raspberry Pi 4 (4 GB of 8 GB RAM)

    Nog 1 op voorraad

    € 399,00

    Leden € 359,10

  • SunFounder 4WD Robot Car Kit for Raspberry Pi Pico

    SunFounder SunFounder 4WD Robot Car Kit for Raspberry Pi Pico

    Niet op voorraad

    Features The Pico Car Kit is a Raspberry Pi Pico based, cool, robotics kit for beginners (12+ Teens) and adults to learn Raspberry Pi Pico programming, electronics assembling and robotics knowledge. (Raspberry Pi Pico with pre-soldered GPIO pins is included.) The Raspberry Pico Car is equipped with a variety of module, ultrasonic module, grayscale sensor, speed sensor, etc and three 8-bit WS2812 RGB boards. In addition, this 4-wheel drive car with Pico RDP also can be DIY interesting functions. The Pico robot building kit can perform Obstacle Avoidance, Object Tracking, Speed Measurement, Mileage Calculation, Line Following and Cliff Detection. In addition, the car is surrounded by three 8-bit WS2812 RGB boards that are capable of displaying cool light effects and direction indications. In addition to providing MicroPython code and tutorials, the customizable application SunFounder Controller is also provided to control this robotic kit. The Raspberry Pi Pico-4WD robot car kit is completely Open Source, providing structure diagrams, module schematics and source code. Includes 3 8-Bit WS2812 RGB Boards Strip. Each LED can be Independently Controlled to Display a Myriad of Colors. Package List Raspberry Pi Pico × 1 Speed Module × 1 Grayscale Semsor Module × 1 8-Bit WS2812B RGB × 3 Pico RDP × 1 Encoder Disk × 2 Ultrasonic Module × 1 Motor × 4 Servo × 1 Top Plate × 1 Bottom Plate × 1 Support × 4 Radar support × 1 R2056 Rivet × 4 R2655 Rivet × 12 R3055 Rivet × 6 Battery Holder × 1 Wheel × 4 M1.5x 4 Self-tapping Screw × 4 M3x8 Self-tapping Screw × 4 M1.4x6 Screw × 6 M2.5x6Screw × 10 M3x6 Screw × 12 M3x28 Screw × 10 M1.4 Nut × 6 M3 Nut 6 × 12 M2.5 x 11Standoff × 6 M3X30 Standoff × 7 Screwdriver × 1 5-pin Wire × 2 4-pin Wire × 4 3-pin Wire × 5 Riboon × 1 USB Cable × 1 Zip Tie × 4 Online Tutorial https://docs.sunfounder.com/projects/pico-4wd-car

    Niet op voorraad

    € 84,95

    Leden € 76,46

  •  -20% MonkMakes Servo Kit for Raspberry Pi

    MonkMakes MonkMakes Servo Kit for Raspberry Pi

    This kit includes 2 servo motors and a Monk Makes ServoSix interface board for use with Raspberry Pi. It also includes a Raspberry Leaf GPIO template, a bunch of female-to-female header pins and a 4xAA battery box.Features of the Servo Six board Screw terminals for servo power supply Reverse-polarity protection for the servo power supply 470 µF 16 V capacitor for servo supply 470 Ω current limiting resistors for servo control lines (to protect GPIO pins) Power indicator LE DownloadsInstructions

    € 24,95€ 19,95

    Leden identiek

  • SunFounder PiCar-4WD Raspberry Pi Car Robot Kit

    SunFounder SunFounder PiCar-4WD Raspberry Pi Car Robot Kit

    Niet op voorraad

    SunFounder PiCar-4WD is a very cool raspberry pi robot kit designed for both Raspberry Pi beginners and professionals to learn electronic kits. It is suitable for the Raspberry Pi 4B and 3 Model B+/ 3B. With the grayscale module, ultrasonic module, Photo-interrupter sensor module, the car can realize obstacle avoidance, line-following, object following, cliff detection, velocity measurement, mileage calculation, and so on.In addition, this new raspberry pi smart car with a tutorial make you easy to assemble this robot car kit, we have written a friendly browser software that quickly turns on/off and freely combines the above-mentioned various functions. U will see a cool appearance car kit to learn electronics, programming, and robotics.If you are interested in autonomous driving, you should own a SunFounder PiCar-4WD! Features 【PROGRAMMING LANGUAGES & VARIOUS MODULES】The Raspberry Pi robot be programmed by Python language. It comes with four sensor modules including 4WD HAT Module, Velocity Measurement Module, 3-ch Grayscale Sensor Module, and 3.3V Ultrasonic Module【MULTIPLE FUNCTIONS】The Multifunctional SunFounder 4WD Smart Car supports multiple functions: Obstacle Avoidance; Line Following; Object Following; Cliff Detection; Velocity Measurement; Mileage Calculation; Radar Sampling. In addition, It has 4 powerful motors, create more power than SunFounder PicarV and PicarS.【WEB CONTROL】The Raspberry Pi Car can be controlled by Android and iOS Mobile to get web remote control, only need your phone can connect the Internet. It compatible with PC (use keyboard control) /Phone (recommended)/Tablet, make robot kits easy, make robot kits fun.【FRIENDLY DESIGN】It comes with a user manual, including operational examples of web terminal, also provides the original python code for in-depth learning. Package List Electronic Parts1 x 4WD HAT Module1 x 2-ch Photo-interrupter Module(Velocity Measurement Module)1 x 3-ch Grayscale Sensor Module1 x 3.3V Ultrasonic Module Other Parts1 x Connection Wire(Grayscale Sensor Module)1 x Connection Wire(Ultrasonic Module)1 x Connection Wire(Photo-interrupter Module)1 x Ribbon4 x Cable Tie1 x Screwdriver4 x Wheels 1 x Battery Holder Driving Parts 4 x Motor1 x Servo Structural Plates1 x Top Plate1 x Bottom Plate2 x Spoiler4 x Support1 x Radar support Mechanical Parts4 x M1.5*4mm Self-tapping Screw6 x M1.4*8mm Screw4 x M2*10 mm Screw10 x M2.5*6mm Screw4 x M3*8mm Flat-head16 x M3*8mm Screw10 x M3*28mm Screw6 x M1.4 Nut4 x M2 Nut18 x M3 Nut6 x M2.5*11mm Bi-pass Nylon Standoff2 x Encoding Disk6 x M2.5*8+6mm Single-pass Nylon Standoff6 x M3*30mm Bi-pass Nylon Standoff

    Niet op voorraad

    € 139,95

    Leden € 125,96

  • Kitronik Discovery Kit for Raspberry Pi Pico

    Kitronik Kitronik Discovery Kit for Raspberry Pi Pico

    The kit ships with a comprehensive guide booklet. The booklet covers the basic setup and then how to complete each of the 7 experiments. Each experiment is complete with detailed circuit diagrams, explanations, and a complete code run-through. This means that you can get started without having to understand too much Python.The Raspberry Pi Pico board, a new low cost, high-performance microcontroller. The board features a powerful new, Raspberry Pi designed ARM-based dual-core chip-- the RP2040. The pico also features 64KB of internal RAM and support for up to 16MB of off-chip Flash. A wide range of flexible I/O options includes I2C, SPI, and Programmable I/O (PIO). These support endless possible applications for this small and affordable board.The kit is programmed using MicroPython. This is a full Python 3 implementation created specifically for small embedded microcontrollers, such as the Pico and the popular BBC micro:bit. You will use the Thonny editor to create your code, which can then be saved directly to the Pico from the editor via USB. Thonny is a Python Editor/IDE designed to allow beginners to get up and running with Python coding with as little fuss as possible.A power pack is not required as power will be supplied via the USB connection to the computer that the Thonny editor is running on.Features This kit offers a great introduction to microcontrollers, Python coding, and physical computing. Make the 7 experiments in the step-by-step tutorial book and learn as you go. All parts are included to conduct the 7 experiments. The kit is supplied with a detailed booklet that covers setup and then how to complete the 7 experiments. The experiments explore; simple coding, Interrupts, Threads, Digital Inputs, and Analog and Digital Outputs. Once you have completed all of the included experiments, you have the perfect prototyping system for further learning/prototyping with the Raspberry Pi Pico board. Included is a large format breadboard for ease of prototyping. The kit is supplied in re-usable packaging suitable for long term storage of the kit. Contents 1x Large Prototype Breadboard 2x Red 5mm LED 2x Yellow 5mm LED 2x Green 5mm LED 10x 330Ω Resistor 1x Piezo Element Buzzer 20x Male to Male Jumper Wires 2x Push Switches A booklet guide containing basic setup information and the following 7 experiments Exp. 1 - Show Me The Light Exp. 2 - Control an Input Exp. 3 - Interrupt Me Exp. 4 - Making a Noise Exp. 5 - So Many Interruptions Exp. 6 - Rub Head and Pat Tummy - Threads Exp. 7 - Building a System from the Blocks we have Learnt The kit is supplied in re-usable packaging suitable for long term storage of the kit. Requires USB Lead Raspberry Pi Pico Pin Headers

    € 17,95

    Leden € 16,16

  • MonkMakes Amplified Speaker Kit for Raspberry Pi

    MonkMakes MonkMakes Amplified Speaker Kit for Raspberry Pi

    The Speaker Kit for Raspberry Pi is a small amplified speaker designed for the Raspberry Pi. Included MonkMakes Amplified Speaker Set of 10 female to female header wires Short stereo audio lead Raspberry Leaf GPIO template Downloads Instructions Datasheet

    € 19,95

    Leden € 17,96

  • Joy-Pi Advanced – Ontwikkelplatform voor Raspberry Pi, Arduino en ESP32

    JOY-iT Joy-Pi Advanced – Ontwikkelplatform voor Raspberry Pi, Arduino en ESP32

    De Joy-Pi Advanced is een compact en krachtig instrument waarmee je snel en eenvoudig je projecten kunt realiseren. Of je nu veel of weinig ervaring hebt, met de Joy-Pi Advanced kun je je creativiteit de vrije loop laten. Dankzij de compatibiliteit met een groot aantal platformen, waaronder Raspberry Pi, Raspberry Pi Pico, Arduino Nano, BBC micro:bit en NodeMCU ESP32, kun je eenvoudig en snel toegang krijgen tot het platform van je voorkeur. Daarnaast heeft de Joy-Pi Advanced meer dan 30 stations, lessen en modules, waardoor je een onbeperkt aantal manieren hebt om je projecten uit te voeren. Met het zelfontwikkelde leercentrum kun je niet alleen je vaardigheden verbeteren, maar ook nieuwe projecten maken. Het leercentrum biedt een schat aan informatie en tutorials die je stap voor stap door je projecten begeleiden. Joy-Pi Advanced wordt in het bijzonder gekenmerkt door zijn intelligente schakeleenheden, die een uitgebreid gebruik van de beschikbare pinnen mogelijk maken. In totaal zijn er drie schakeleenheden geïntegreerd, elk voorzien van 12 individuele schakelaars die zorgen voor een nauwkeurige aansturing van de aangesloten sensoren en modules. Dit systeem lost het bekende probleem van het beperkte aantal pinnen op dat optreedt bij conventionele microcontrollers. Met de schakeleenheden kun je een groot aantal sensoren en modules parallel aansturen door ze afzonderlijk aan en uit te schakelen. Dit simuleert meervoudige pintoewijzing, waardoor je het volledige vermogen van je projecten kunt benutten zonder afbreuk te doen aan de functionaliteit. Door onze innovatieve adapter boards en het micro:bit slot te combineren, bereiken we naadloze compatibiliteit met een breed scala aan microcontrollers zoals Raspberry Pi Pico, NodeMCU ESP32, micro:mit en Arduino Nano. De speciaal ontwikkelde adapterkaarten zijn zo ontworpen dat ze perfect passen bij de betreffende microcontroller. Door de microcontroller op het juiste adapterboard aan te sluiten en deze vervolgens in het micro:bit slot te steken, wordt de Joy-Pi Advanced snel en eenvoudig compatibel met de verschillende microcontrollers. Dit zorgt voor een naadloze integratie van het platform van je voorkeur en de mogelijkheid om de sterke punten van de verschillende microcontrollers te combineren in je projecten. Op deze manier kun je je volledig richten op je creatieve projecten zonder dat je je zorgen hoeft te maken over de compatibiliteit van verschillende microcontrollers. De Joy-Pi Advanced vereenvoudigt het ontwikkelproces en geeft je de mogelijkheid om je projecten flexibel en individueel te ontwerpen. Kenmerken Sterk geïntegreerd ontwikkelplatform & leercentrum Snel, eenvoudig & draadloos combineren van verschillende sensoren & actuatoren Installatieoptie voor Raspberry Pi 4 Compatibel met verschillende microcontrollers Zelfontwikkeld, didactisch leerplatform voor Raspberry Pi & Windows Specificaties Compatibel met Raspberry Pi 4, Arduino Nano, NodeMCU ESP32, BBC micro:bit, Raspberry Pi Pico Geïnstalleerde sensoren, actuatoren & componenten 39 Leerplatform Meer dan 40 items in de kennisdatabase, 10 projecten, 10 lessen, 14 visies Displays 7-segment display, 16x2 display, 1,8' TFT-display, 0,96' OLED-display, 8x8 RGB-matrix Sensoren DS18B20, schoksensor, hallsensor, barometer, geluidssensor, gyroscoop, PIR-sensor, Lichtbarrière, NTC, Lichtsensor, 6x aanraaksensor, kleurensensor, ultrasone afstandssensor, DHT11 temperatuur- & vochtigheidssensor Controle Joystick, 5x schakelaars, potentiometer, draaiencoder, 4x4 knoppenmatrix, relais, PWM-ventilator Motoren Servo-interface, Stappenmotorinterface, Trilmotor Meet- en conversiemodules Analoog-digitaalomzetter, niveauomzetter, voltmeter, variabele spanningsbron Andere onderdelen RTC real-time klok, zoemer, EEPROM-geheugen, infrarood ontvanger, breadboard, RFID-lezer Adapterkaarten Adapter voor NodeMCU ESP32, Arduino Nano & Raspberry Pi Pico, Board connectors voor Raspberry Pi & externe boards Elektronische onderdelen Infrarood afstandsbediening, RFID-chip, RFID-kaart, 6x krokodillenklemmen, microSD-kaartlezer, servomotor, stappenmotor, 32 GB microSD-kaart Onderdelen 40x weerstanden, 3x groene LED's, 3x gele LED's, 3x rode LED's, 1x transistor, 5x knoppen, 1x potentiometer, 2x condensatoren Andere accessoires Schroevenassortiment, schroevendraaier, accessoire-opbergtas, voeding & voedingskabel, servo bevestiging Stroomvoorziening Ingebouwde voeding: 36 W, 12 V, 3 A Behuizingsconnector: Kleine apparaat stekker C8 Spanningsuitgangen 12 V, 5 V, 3,3 V, variabele spanningsuitgang (2-11 V) Databussen & signaaluitgangen I²C, SPI, Analoog naar digitaal converter Batterij (RTC) CR2032 Afmetingen 327 x 200 x 52 mm Vereist Raspberry Pi 4 Downloads Joy-Pi website Datasheet Manual

    € 369,00

    Leden € 332,10

  • SunFounder Kepler Kit (Ultimate Starter Kit for Raspberry Pi Pico W)

    SunFounder SunFounder Kepler Kit (Ultimate Starter Kit for Raspberry Pi Pico W)

    Your gateway to IoT and microcontroller programming With 450+ components and 117 online projects, this comprehensive kit ignites your creativity. The tutorials by Paul McWhorter make learning enjoyable for beginners and advanced users. This kit supports MicroPython, C/C++, and Piper Make, offering diverse programming options. Explore sensors, actuators, LEDs, and LCDs for endless project possibilities. From home automation to robotics, this kit empowers your tech journey. Features IoT Starter Kit for Beginners: This kit offers a rich IoT learning experience for beginners. With 450+ components, 117 projects, and expert-led video lessons, this kit makes learning microcontroller programming and IoT engaging and accessible. Expert-Guided Video Lessons: The kit includes 27 video tutorials by the renowned educator, Paul McWhorter. His engaging style simplifies complex concepts, ensuring an effective learning experience in microcontroller programming. Wide Range of Hardware: The kit includes a diverse array of components like sensors, actuators, LEDs, LCDs, and more, enabling you to experiment and create a variety of projects with the Raspberry Pi Pico W. Supports Multiple Languages: The kit offers versatility with support for three programming languages - MicroPython, C/C++, and Piper Make, providing a diverse programming learning experience. Dedicated Support: Benefit from our ongoing assistance, including a community forum and timely technical help for a seamless learning experience. Included Raspberry Pi Pico W Breadboard Jumper Wires Resistor Transistor Capacitor Diode Li-po Charger Module 74HC595 TA6586 – Motor Driver Chip LED RGB LED LED Bar Graph 7-segment Display 4-Digit 7-Segment Display LED Dot Matrix I²C LCD1602 WS2812 RGB 8 LEDs Strip Buzzer DC Motor Servo DC Water Pump Relay Button Micro Switch Slide Switch Potentiometer Infrared Receiver Joystick Module 4x4 Keypad MPR121 Module MFRC522 Module Photoresistor Thermistor Tilt Switch Reed Switch PIR Motion Sensor Module Water Level Sensor Module Ultrasonic Module DHT11 Humiture Sensor MPU6050 Module Documentation Online Tutorials in 3 languages (EN, DE and JP)

    € 69,95

    Leden € 62,96

  • Seeed Studio Grove Starter Kit voor Raspberry Pi Pico

    Seeed Studio Seeed Studio Grove Starter Kit voor Raspberry Pi Pico

    Features Ga eenvoudig en snel aan de slag met Raspberry Pi Pico 14 zelfgekozen Grove-modules, waaronder 5 sensoren/ 5 actuatoren/ 2LED/ 1 LCD-display/ 1 Grove-schild Gedetailleerde en uitgebreide Micropython-tutorials voor elke module (Arduino-gids is onderweg) Geen bedrading, geen lassen, plug & play ervaring Inbegrepen 1 x Grove - LED Pack 1 x Grove - RGB LED (WS2813 Mini) 1 x Grove - Lichtsensor 1 x Grove - Geluidssensor 1 x Grove - Roterende Hoeksensor 1 x Grove - Temperatuur & Vochtigheid Sensor 1 x Grove - mini PIR bewegingssensor 1 x Grove - passieve zoemer 1 x Grove - Knop 1 x Grove - Servo 1 x Grove - Mini Ventilator 1 x Grove - Relais 1 x Grove - 16x2 LCD 1 x Grove Shield voor Pi Pico 8 x Grove Kabel

    € 54,95

    Leden € 49,46

  • Seeed Studio Grove Smart Agriculture Kit for Raspberry Pi 4

    Seeed Studio Seeed Studio Grove Smart Agriculture Kit for Raspberry Pi 4

    Features Easy-to-use and low-cost hardware kit: combines an affordable hardware kit with FREE curriculums and activities for students’ hands-on experience in precision agriculture techniques to food production. New tools for STEAM Education learners: students learn about AI, Machine learning, and IoT by building a garden monitoring system. Easily use with Raspberry Pi 4: with atmospheric and environmental sensors to understand their soil's health, analyze data, and make decisions. Real-time data collection: The student-built IoT devices connect to custom Microsoft Excel workbooks that collect real-time data using Excel’s Data Streamer. Building your own Machine Learning models: using Lobe.ai, students apply the technique to predict nutrient deficiencies in their plants and identifying pests in their garden. Introducing Microsoft responsible AI framework: engaging students with some of the social and ethical challenges raised by this new technology. ApplicationsCombined with software and curriculum & resources, you can get hands-on experience, learn about artificial intelligence, machine learning, the Internet of Things, data science and then apply the knowledge in growing plants in the real world.This kit is highly suitable for use in different scenarios, no matter in the classroom, at home, at maker spaces/ fab labs or through distance learning courses: School garden monitoring Home garden monitoring Distance teaching /learning Online courses Hobby and DIY projects Included 1x Grove Base Hat for Raspberry Pi with a Fan 1x One Wire Temperature Sensor 1x Grove Capacitive Soil Moisture Sensor 1x Grove Sunlight Sensor 1x Grove Temperature & Humidity Sensor 1x Grove Relay 1x Grove Dual Button 1x micro SD Card with Card Reader (32 GB) 1x USB to TTL Serial Cable 1x Screwdriver Downloads FarmBeats for Student Kit Brochure FarmBeats Student Image

    € 114,95

    Leden € 103,46

  • SunFounder NAS Kit for Raspberry Pi with Dual Fan

    SunFounder NAS Kit for Raspberry Pi with Dual Fan

    Features Abundant Expandability- You can add a hard drive by merely adding the nylon standoff and acrylic board. The OpenMediaVault includes services such as SSH, (S)FTP, SMB/CIFS, DAAP media servers, RSync, BitTorrent clients. The E-Ink screen makes it more power-efficient. It provides you with an excellent visual experience, which is used to display Raspberry Pi's CPU temperature, CPU usage, disk usage, fan power, etc. Simple product composition, accessories with corresponding numbers, and providing detailed tutorials make it easy to set up. Dual fans and heat sinks installed, working automatically when the CPU temperature exceeds 54 degrees, quickly and effectively solving the heating problem of Raspberry pi motherboard. Specification for E-Ink Working voltage:3.3 V Communication interface: 3-wireSPI, 4-wireSPI Dimensions: 59.2 mm x 29.2 mm x 1.05 mm Display size: 48.55 mm x 23.71 mm Pitch: 0.194 x 0.194 Resolution: 250 x 122 Display color: black and white Gray level: 2 Global refresh: 2s Refresh function: 26.4 Mw (Typ.) Standby power consumption < 0.017 Mw Viewing angle > 170 ° If the manual refresh mode is set, you will need to press OK to refresh. In auto mode, the E-Ink screen will refresh automatically every 500 ms; Package List 1 x NAS HAT 3 x NAS 3 mm transparent acrylic 1 x Micro SD card (8 G) 1 x SATA to USB hard drive cable ( length 0.45 M) 1 x Screwdriver 4 x Silicone Pad 1 x Dual fan 3 x Heat sink 10 x M2 x 12 Screws 10 x M2 Nut 14x M3 x 8 mm Screws 10 x M2.5 x 6 mm Screws 6 x M3 x 26 mm Nylon Standoff 6 x M3 x 13 + 6 mm Single-pass Nylon Standoff 6 x M2.5 x 11 mm Nylon Standoff 6 x M2.5 x 8 + 6 mm single-pass Nylon Standoff NOTE: It is recommended to use the RPi 4B with the SunFounder NAS Kit together, as the USB3.0 interface can provide you with higher file transfer efficiency. The SunFounder NAS Kit currently only supports the expansion of two hard-drive.

    € 89,95

    Leden € 80,96

Raspberry PI kit voor starters kopen

Kun je niet wachten om met Raspberry Pi aan de slag te kunnen gaan? Met een starterkit beschik je over alle componenten

Wie graag snel aan de slag wilt met het programmeren op een Raspberry, maakt met de starterkit van Elektor een vliegende start. Met de Raspberry Pi Starter Kit heb je alle benodigde componenten, de juiste voeding- en geheugenkaart, met behuizing in huis om  aan de slag te kunnen.

Of je nu jouw eigen mediaspeler, smart-home bediening of desktop-pc op broekzakformaat wilt. Met een starterkit heb je alles in één keer in huis om s ’werelds populairste en meest gebruikte minicomputer te installeren en te gebruiken.

De voordelen van een Raspberry pi starterkit 

Met de Raspberry Pi starterkits heb je in één keer alle benodigdheden in huis om aan de slag te gaan. Het kost veel tijd, zeker voor beginners, om alle componenten los van elkaar te kopen. Met een starterkit heb je direct alles bij elkaar!

Het bespaart je veel tijd en ook nog eens geld wanneer je niet alle losse componenten hoeft aan te schaffen. Zeker als beginner is het prettig om met de starterkits aan de slag te gaan, omdat je overweldigd kunt raken van alle beschikbare informatie en de eindeloze mogelijkheden met een Raspberry Pi.

Omdat Elektor een officiële verkoper van de Raspberry Foundation is, krijgen wij de Raspberry kits rechtstreeks uit de fabriek van de ontwikkelaar. Daarom bieden wij jou de laagst mogelijke prijs voor een starter kit en officiële accessoires zoals voedingen, behuizingen, sensoren, robots, camera's, displays en boeken.

Starterkits voor verschillende Raspberry PI varianten

Oorspronkelijk is de Raspberry Pi bedoeld voor educatie over elektronica, computers en computertechnologie. Inmiddels heeft de hardware van Raspberry zo’n grote sprong in snelheid en rekenkracht gemaakt dat Raspberry’s in huis én industrie toegepast worden.

Vandaag de dag ontwikkeld de open-source community nog dagelijks aan de soft- en hardware van de verschillende Raspberry producten. Dit heeft geleid dat er verschillende starterkits beschikbaar zijn:

  • Raspberry Pi 4 Starterkit - De Pi 4 starterkit heeft alles wat je nodig hebt om met te starten met een volwaardige computer op broekzakformaat. Het is jouw smart-home hub, mediaspeler of desktopcomputer op een moederbord gesoldeerd.  De starterkit komt geleverd met:
    • Raspberry Pi 4 B (2, 4 of 8 GB RAM)
    • JOY-iT Aluminium behuizing voor Raspberry Pi 4 met passieve koeling
    • Officiële EU Voeding voor Raspberry Pi 4 (zwart),
    • Officiële HDMI Kabel voor Raspberry Pi 4 (zwart)
    • en MicroSD kaart (32 GB) met voorgeïnstalleerde NOOBS
  • Raspberry Pi Zero Starterkit - De Zero is de kleinste en goedkoopste Pi-computer en is als opvolger van de Pi 2 W een veel snellere in de dagelijkse praktijk. De starterkit van Elektor komt geleverd met:
    • Raspberry Pi Zero 2 W,
    • officiele behuizing en
    • HDMI kabel.
  • Raspberry Pico starterkit - Met de Pico starterkit beschik je over de meest goedkope Raspberry Pi ooit gemaakt. Met dit krachtige, flexibele en veelzijdige microcontroller board is het mogelijk om lichtdisplays en IoT-apparaten te besturen.

Login

Wachtwoord vergeten?

Heb je nog geen account?
Maak account aan