Robotics

30 producten


  • Cytron 10Amp 5-30 V DC Motor Driver

    Cytron Cytron 10Amp 5-30 V DC Motor Driver

    Features Ondersteunt motorspanning van 5 V tot 30 V DC Stroom tot 13 A continu en 30 A piek 3,3 V en 5 V logisch niveau ingang Compatibel met Arduino en Raspberry Pi Snelheidsregeling PWM-frequentie tot 20 kHz Volledig NMOS H-Bridge voor betere efficiëntie Er is geen koellichaam nodig Bi-directionele regeling voor één geborstelde DC-motor Regeneratief remmen Voor meer informatie, bekijk de gebruikershandleiding Voor de Arduino-bibliotheek geleverd door mijn Cytron klik hier

    € 17,95

    Leden € 16,16

  • Cytron Maker Pi RP2040 - Robotica met Raspberry Pi RP2040

    Cytron Cytron Maker Pi RP2040 - Robotica met Raspberry Pi RP2040

    Cytron Maker Pi RP2040 is voorzien van de eerste microcontroller ontworpen door Raspberry Pi - RP2040, ingebed op een robot controller bord. Dit bord wordt geleverd met dual channel DC motor driver, 4 servo motor poorten en 7 Grove I / O-connectoren, klaar voor uw volgende DIY robot / motion control project. Nu kunt u bouwen robot, terwijl het uitproberen van de nieuwe RP2040 chip.De DC motor driver kan 2x geborstelde DC motoren of 1x bipolaire/unipolaire stappenmotor aansturen van 3.6 V tot 6 V, en levert continu tot 1 A stroom per kanaal. Met de ingebouwde sneltestknoppen en motoruitgangs-LED's kan de motor driver op een snelle en handige manier functioneel worden getest, zonder dat code hoeft te worden geschreven. Vmotor voor zowel DC- als servomotoren is afhankelijk van de ingangsspanning die aan het bord wordt geleverd.De Maker Pi RP2040 heeft al het goede van de producten uit de Maker-serie van Cytron. Het heeft ook veel LED's nuttig voor het oplossen van problemen (& visuele effecten), is in staat om heel wat lawaai te maken met de onboard piëzo zoemer en wordt geleverd met drukknoppen klaar om uw aanraking te detecteren.Er zijn drie manieren om de Maker Pi RP2040 van stroom te voorzien - via een USB-aansluiting (5 V), met een eencellige LiPo/Li-Ion-batterij of via de VIN-aansluitingen (3,6-6 V). Er is echter maar één stroombron nodig om zowel het controllerbord als de motoren tegelijk van stroom te voorzien. De voeding van al deze stroombronnen kan worden geregeld met de aan/uit-schakelaar aan boord.Cytron Maker Pi RP2040 is in principe de Raspberry Pi Pico + Maker series 'goedheid + Robot controller & andere nuttige functies. Daarom is dit bord compatibel met het bestaande Pico ecosysteem. Software, firmware, bibliotheken en hulpmiddelen die zijn ontwikkeld voor Pico zouden ook naadloos moeten werken met Cytron Maker Pi RP2040.CircuitPython is vooraf geladen op de Maker Pi RP2040 en het draait een eenvoudig demoprogramma direct uit de doos. Sluit hem aan op uw computer via een USB-microkabel en zet hem aan. U wordt begroet door een melodietje en een LED-lampje. Druk op de GP20- en GP21-drukknoppen om de LED's aan en uit te zetten, terwijl u de aangesloten DC- en servomotoren laat bewegen en stoppen. Met deze democode kunt u het bord meteen testen zodra u het ontvangt! Terwijl aangesloten op uw computer, verschijnt een nieuw CIRCUITPY station. Verken en bewerk de demo code (code.py & lib folder) met elke code editor die u wilt, sla eventuele wijzigingen op in de drive en u zult het in actie zien in een mum van tijd. Dat is waarom wij CircuitPython omarmen - het is heel gemakkelijk om te beginnen. Wilt u andere programmeertaal gebruiken? Natuurlijk, u bent vrij om MicroPython en C/C++ te gebruiken voor de Pico/RP2040. Voor degenen onder u die houdt van het Arduino ecosysteem, neem dan een kijkje op deze officieel nieuws door Arduino en ook de onofficiële Pico Arduino Core door Earle F. Philhower.Features Gedreven door Rapberry Pi RP2040 Dual-core Arm Cortex-M0+ processor 264 KB intern RAM 2 MB Flash-geheugen dezelfde specificaties als Raspberry Pi Pico Robot controller bord 4x servomotoren 2x DC-motoren met sneltestknoppen Veranderlijk stroomcircuit Automatische voedingskeuze: USB 5 V, LiPo (1-cel) of Vin (3,6-6 V) Ingebouwde 1-cel LiPo/Li-Ion lader (over-charged & over-discharged bescherming) Aan/uit schakelaar 13x Status indicator LEDs voor GPIO pinnen 1x Piëzo zoemer met mute-schakelaar 2x drukknop 2x RGB LED (Neopixel) 7x Grove poorten (flexibele I/O opties: digitaal, analoog, I²C, SPI, UART...) Voorgeïnstalleerd met CircuitPython standaard Gaten frezen 4x 4,8 mm montagegat (LEGO pin compatibel) 6x M3 schroefgat

    € 16,95

    Leden € 15,26

  • Sipeed Maixduino Kit voor RISC-V AI + IoT

    Seeed Studio Sipeed Maixduino Kit voor RISC-V AI + IoT

    Niet op voorraad

    MAIX is Sipeed's speciaal gebouwde productreeks, ontworpen om AI aan de rand te laten draaien. Verplaats AI-modellen van de cloud naar apparaten aan de rand van het netwerk, waar ze sneller, tegen lagere kosten en met meer privacy kunnen draaien. MAIX is niet alleen een hardwareoplossing, maar combineert hardware op maat, open software en geavanceerde AI-algoritmen. Verschillende soorten dev. boards, kits, randapparatuur en brede compatibiliteit maken een snelle en flexibele ontwikkeling van prototypes mogelijk, waardoor AIoT-projecten veel eenvoudiger worden. En dankzij MAIX' prestaties, kleine voetafdruk, laag stroomverbruik en lage kosten, maakt het de brede inzet van hoogwaardige Edge AI mogelijk.Toepassingen Smart Home toepassingen zoals robot schoonmakers, slimme luidsprekers, elektronische deursloten, huishoudelijke monitoring etc. Medische industrietoepassingen zoals hulpdiagnose en -behandeling, medische beeldherkenning, noodalarm etc. Slimme industriële toepassingen zoals industriële machines, intelligent sorteren, bewaking van elektrische apparatuur, enz. Onderwijstoepassingen, zoals onderwijsrobots, intelligente interactieve platforms, onderwijs-efficiëntie-inspectie, enz. Landbouwtoepassingen zoals landbouwmonitoring, bewaking van plagen en ziekten, geautomatiseerde controle, enz. Features CPU: RISC-V Dual Core 64bit, met FPU; 400MHz neurale netwerkprocessor QVGA@60FPS/VGA@30FPS beeldidentificatie Onboard ESP32 module ondersteunt 2.4G 802.11. b/g/n en Bluetooth 4.2 Arduino Uno vormfactor, Arduino compatibele interface Onboard omnidirectionele I²S digitale uitgang MEMS Microfoon 24P 0,5 mm FPC-connector voor DVP-camera 8-bit MCU LCD 24P 0.5mm FPC connector Ondersteunt zelfelastische micro SD-kaarthouder Reset en boot knop; 3W DAC+PA Audio uitgang U hoeft alleen de USB Type-C kabel aan te sluiten om de download te voltooien Machinevisie op basis van convolutioneel neuraal netwerk Hoge prestaties microfoon array processor voor machine gehoor Ondersteunt MaixPy IDE, Arduino IDE, OpenMV IDE, en PlatformIO IDE Ondersteuning van Tiny-Yolo, Mobilenet en TensorFlow Lite voor deep learning Technische specificaties Mastermodule Geveegde MAIX-I AIoT-module Voedingang USB Type-CDC-DC step-down circuit: ondersteuning 6-12V input; 5V 1,2A output Micro SD-kaart (TF-kaart) sleuf Steun Zelf-elastische kaarthouder Onboard MEMS microfoon MSM261S4030H0 is een omnidirectionele, bottom-ported, I²S digitale uitgang MEMS Microfoon. Het heeft hoge prestaties en betrouwbaarheid. DVP Camera-interface 24P 0,5mm FPC connector LCD-aansluiting 8bit MCU LCD 24P 0.5mm FPC connector Audio-uitgang DAC+PATM8211: 16 bit dynamisch bereik;Lage harmonische vervormingNS4150: 3W uitgangsvermogen; Tot 90% efficiëntie ESP32-module Ondersteunt 2.4G 802.11.b/g/n802.11 n (2.4 GHz) snelheden tot 150 MbpsBluetooth v4.2 volledige standaard, inclusief traditionele Bluetooth (BR/EDR) en Bluetooth Low Energy (BLE) Voedingsspanning van externe voeding 4.8V ~ 5.2V Supply current of external power supply >600mA Temperatuurstijging <30K Waaier van het werk temperatuur -30℃ ~ 85℃ MCU: ESP8285 Tensilica L106 32-bit MCU Draadloze Standaard 802.11 b/g/n Frequentiebereik 2400Mhz - 2483.5Mhz TX Vermogen (Geleidingsproef) 802.11.b: +15dBm802.11.g: +10dBm(54Mbps)802.11.n: +10dBm (65Mbps) Antenne Connector IPEX 3.0x3.0mm Wi-Fi mode Station/SoftAP/SoftAP+Station Inhoud 1x Maixduino Ontwikkel Bord 1x GC0328 Camera Module 1x 2,4 inch TFT-scherm

    Niet op voorraad

    € 32,95

    Leden € 29,66

  •  -17% DFRobot Gravity – Lightning Distance Sensor

    DFRobot DFRobot Gravity - Lightning Distance Sensor

    Nog 3 op voorraad

    The embedded man-made disturber rejection algorithm can effectively avoid the electrical interference generated by various household appliances. In addition to allowing general weather enthusiasts to measure local thunderstorm data simply and efficiently, thanks to its compact size and wide detection range, it can also be embedded in various smart wearable devices for an outdoor climber or people who work at heights.This provides early warning of thunderstorms that people can perceive so that people can take precautions a step ahead. The sensor can also be embedded in the indoor protection device inside lightning-sensitive equipment, and automatically trigger these devices to switch to the backup power to isolate the power grid when lightning strikes. At the moment of lightning, the interrupt pin IRQ generates a pulse. This can be used to trigger the shutter to open, helping photographers to accurately capture the exciting moment of lightning.The maximum estimated distance of lightning strike is 40km. Limited by the inherent measurement method and algorithm, the distance estimation resolution is 1~4km, 40 km in 15 steps.Features Lightning detection within 40km in 15 steps Lighting intensity detection Used both indoors or outdoors Embedded man-made disturber rejection algorithm Applications Consumer Weather Station (thunderstorm measurement) Wearable Devices (outdoor thunderstorm early warning) Lightning Photography Specification Input Voltage : 3.3 V - 5.5 V Maximum Detection Range: 40 km Distance Detection Resolution: 1 km - 4 km Intensity Detection Resolution: 21 bits, i.e. 0 ~16777201 I2C Address: Three options 0x03, 0x02, 0x01 Interface: Gravity I2C (logic level: 0-VCC) Dimension: 30 mm x 22 mm For more information, check out the DFRobot Gravity – Lightning Distance Sensor wiki page here.

    Nog 3 op voorraad

    € 29,95€ 24,95

    Leden identiek

  • Cytron 3Amp 4-16 V DC Motor Driver (2 Channels)

    Cytron Cytron 3Amp 4-16 V DC Motor Driver (2 Channels)

    Kenmerken: Ondersteunt motorspanning van 4 V tot 16 V DC Tweerichtingsbesturing voor twee borstel gelijkstroommotoren Bestuurt één unipolaire of één bipolaire stappenmotor Maximale motorstroom: 3A continu, 5A piek LED's voor de toestand van de motoruitgang Knoppen voor snel testen Compatibel met Arduino en Raspberry Pi PWM frequentie tot 20kHz Bescherming tegen omgekeerde polariteit Hier kun je het datasheet van het product vinden. Bekijk de voorbeeldcode van Cytron hier.

    € 10,95

    Leden € 9,86

  • Kitronik Robotics Board for Raspberry Pi Pico

    Kitronik Kitronik Robotics Board for Raspberry Pi Pico

    The Robotics Board features 2 Dual H Bridge Motor Driver ICs. These are capable of driving 2 standard motors or 1 stepper motor each, with full forward, reverse, and stop control. There are also 8 servo outputs, capable of driving standard and continuous rotation servos. They can all be controlled by the Pico using the I²C protocol, via a 16 channel driver IC. The IO break out provides connections to all the unused pins on the Pico. The 27 available I/O pins allow other devices, such as sensors or ZIP LEDs, to be added to the board. Power is provided via either a terminal block or servo style connector. The supply is then controlled by an on/off power switch to the board and there is also a green LED to indicate when the board has power. The board then produces a regulated 3.3V supply which is fed into the 3 V and GND connections to power the connected Pico. This removes the need to power the Pico separately. The 3 V and GND pins are also broken out on the header, which means external devices can also be powered. To use the robotics board, the Pico should be firmly inserted into the dual row pin socket on the board. Ensure the Pico is inserted with the USB connector at the same end as the power connectors on the robotics board. This will allow access to all of the board functions and each pin is broken out. Features A compact yet feature-packed board designed to sit at the heart of your Raspberry Pi Pico robotics projects. The board can drive 4 motors (or 2 stepper motors) and 8 servos, with full forward, reverse, and stop control. It also features 27 other I/O expansion points and Power and Ground connections. The I²C communication lines are also broken out allowing other I²C compatible devices to be controlled. This board also features an on/off switch and power status LED. Power the board via either a terminal block or servo style connector. The 3V and GND pins are also broken out on the Link header, allowing external devices to be powered. Code it with MicroPython or via an editor such as the Thonny editor. 1 x Kitronik Compact Robotics Board for Raspberry Pi Pico Dimensions: 68 x 56 x 10 mm Requires Raspberry Pi Pico board

    € 24,95

    Leden € 22,46

  • Raspberry Pi Pico 6 DOF Robotarm van MakerFabs

    Makerfabs Raspberry Pi Pico 6 DOF Robotarm van MakerFabs

    Met het project uit deze kit stuur je de 6 servos van de robotarm aan met slechts zeer beperkt gebruik van MCU capaciteit, waardoor de Raspberry Pi Pico's MCU nog gemakkelijk andere taken aankan. Deze robotarm met 6 DOF* is een prima tool om robotica én Raspberry Pi Pico te leren programmeren en gebruiken. Leerzaam, maar vooral leuk! Inbegrepen in de kit zijn 5 MG996 (4 nodig in de assemblage en 1 als reserve) en 3 25-kg-servo's (2 nodig in de assemblage en 1 als reserve). Merk op dat voor de servo's de hoekschikking 0°~180° alle servo's vooraf moeten worden ingesteld op 90 graden vóór de assemblage om servoschade tijdens de beweging te voorkomen.Dit product bevat alle benodigde onderdelen om deze op Raspberry Pi Pico en MicroPython gebaseerde robotarm te maken.Het pakket bevat 1x Raspberry Pi Pico 1x Raspberry Pi Pico Servo Driver 1x De complete set '6 DOF Robot Arm' 1x 5 V/5 A Power Supply 2x Backup Servo (zie tekst) Downloads GitHub Wiki Assembly Guide Assembly Video *Een 'vrijheidsgraad' (DoF) met betrekking tot robotarmen is een onafhankelijk gewricht dat de arm vrij kan laten bewegen, hetzij in roterende, hetzij in translerende (lineaire) zin. Voor elke geometrische as waar een gewricht omheen kan draaien of zich langs kan uitstrekken, wordt dit geteld als één Degree of Freedom.

    € 139,95

    Leden € 125,96

  • HuskyLens AI Camera met Silicone Case

    HuskyLens AI Camera

    Heeft u een eenvoudige AI-camera nodig om uw projecten te verbeteren?  Het intuïtieve ontwerp van de HuskyLens AI-camera stelt de gebruiker in staat om verschillende aspecten van de camera te bedienen door gewoon op knoppen te drukken. U kunt het leren van nieuwe objecten starten en stoppen en zelfs schakelen tussen algoritmes vanaf het apparaat. Om de noodzaak van aansluiting op een pc verder te verminderen, wordt de HuskyLens AI Camera geleverd met een 2-inch display, zodat u in realtime kunt zien wat er gaande is. Specificaties Processor: Kendryte K210 Beeldsensor: OV2640 (2.0 Megapixel Camera) Voedingsspanning: 3,3~5,0 V Stroomverbruik (TYP): 320 mA bij 3,3 V, 230 mA bij 5,0 V (gezichtsherkenningsmodus; 80% helderheid achtergrondverlichting; vullicht uit) Aansluitingsinterface: UART, I²C Display: 2,0-inch IPS-scherm met 320x240 resolutie Ingebouwde algoritmen: Gezichtsherkenning, Object Tracking, Object Recognition, Line Tracking, Kleurherkenning, Tag Recognition Afmeting: 52 x 44,5 mm Inbegrepen 1x HuskyLens moederbord 1x M3 Schroeven 1x M3 Moeren 1x Kleine montagebeugel 1x Verhoogingsbeugel 1x Zwaartekracht 4-Pin Sensor Kabel

    € 89,95

    Leden € 80,96

  • Waveshare PicoGo Mobile Robot for Raspberry Pi Pico

    Waveshare Waveshare PicoGo Mobile Robot for Raspberry Pi Pico

    Nog 3 op voorraad

    The PicoGo is a smart mobile robot based on Raspberry Pi Pico, it includes ultrasonic module, LCD module, Bluetooth module, line following module, and obstacle avoidance module, all these functions are highly integrated for easily achieving IR obstacle avoidance, auto line following, Bluetooth/IR remote control, and more. With various advanced features, it will help you fast get started with smart robot design and development. Features Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series Battery protection circuit: over charge/discharge protection, over current protection, short circuit protection, reverse proof, more stable and safe operating Recharge/Discharge circuit, allows programming/debugging concurrently while recharging 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking Onboard multiple smart robot sensors like line tracking, obstacle avoidance, no more messy wiring 1.14-inch IPS colorful LCD display, 240 x135 pixels, 65K colors Integrates Bluetooth module, allows teleoperations like robot movement, RGB LED display color, buzzer, etc. by using mobile phone APP N20 micro gearmotors, with metal gears, low noise, high accuracy Colorful RGB LED IR obstacle avoidance The module sends IR beam and detects objects by receiving the reflected IR beam, to easily avoid obstacles in the way. Auto line following Features 5-ch IR detector for sensing and analysing the black line, combined with PID algorithm for adjusting robot movement, high sensitivity, stable tracking. Ultrasonic sensor Ultrasonic is generally faster and easy-to-calculate, suitable for functions like real time control, and obstacle avoidance, with the industrial practical ranging accuracy, it is widely used on robot research and development. Object tracking The robot is able to detect front object by ultrasonic or IR, and keeps moving to track the target automatically. IR remote control Integrates IR receiver, so that you can control the robot to move or turn direction by sending infrared light from the remote controller. Bluetooth remote control Comes with mobile phone APP, allows you to use the phone to control the movement of the robot, or control its peripherals like changing LED color, making the buzzer to sound, etc. RGB LED control Included 1x PicoGo base board 1x PicoGo acrylic panel 1x 1.14-inch LCD Module 1x Ultrasonic sensor x1 1x IR remote controller 1x USB-A to micro-B cable 1.2 m 1x PH2.0 8-Pin cable 5 cm opposite side headers 1x Mini cross wrench sleeve 1x Screwdriver 1x Screws and standoffs pack Required 1x Raspberry Pi Pico (pre-soldered header) 1x 5 V/3 A power supply 2x 14500 batteries Downloads Wiki

    Nog 3 op voorraad

    € 67,95

    Leden € 61,16

  • Bijna uitverkocht JOY-iT Robot Car Kit 01 voor Arduino

    JOY-iT JOY-iT Robot Car Kit 01 voor Arduino

    Nog 1 op voorraad

    Stap zonder complicaties en tegen een redelijke prijs in de wereld van de robotica met de Car Kit 01 voor Arduino. Dit is een kit die kan worden gebruikt als een basis framework voor een auto/robot. De set is zeer eenvoudig in elkaar te zetten en in een mum van tijd klaar voor gebruik. De meegeleverde motorreductoren (met dubbele as) kunnen worden gebruikt in een spanningsbereik van 3 tot 9 volt. Het toerental varieert tussen 90 en 300 omwentelingen per minuut. Het koppel (gf/cm) tussen 800 en 1200. De Car Kit is compatibel met alle Arduino boards. Note: U zult ook andere componenten moeten toevoegen zoals een stroombron (batterijen) en een controller zoals een Arduino met een motor controller. De bodemplaat bevat al de gaten voor de montage van een Arduino. Gebruikershandleiding

    Nog 1 op voorraad

    € 21,95

    Leden € 19,76

  • Cytron REKA:BIT – Robotics with micro:bit

    Cytron Cytron REKA:BIT - Robotics with micro:bit

    Program your REKA:BIT with Microsoft MakeCode Editor. Just add REKA:BIT MakeCode Extension and you’re good to go. If you’re a beginner, you can start with the block programming mode; simply drag, drop and snap the coding blocks together. For more advanced users, you can easily switch into JavaScript or Python mode on MakeCode Editor for text-based programming.REKA:BIT possesses a lot of indicator LEDs to assist your coding and troubleshooting. It covers the IO pins connected to all six Grove ports and DC motor outputs from the co-processor. One is able to check his/her program and circuit connection easily by monitoring these LEDs.Besides, REKA:BIT also has a power on/off indicator, undervoltage, and overvoltage LEDs built-in to give appropriate warnings should there be any problem with the power input.REKA:BIT features a co-processor to handle multitasking more efficiently. Playing music while controlling up to 4x servo motors and 2x DC motors, animating micro:bit LED matrix, and even lighting up RGB LEDs in different colors, all at the same time, is not a problem for REKA:BIT.Features 2x DC motor terminalsBuilt-in motor quick test buttons (no coding needed) 4x Servo motor ports 2x Neopixel RGB LEDs 6x Grove port (3.3 V) 3x Analog Input / Digital IO ports 2x Digital IO ports 1x I²C Interface DC jack for power input (3.6 - 6 VDC) ON/OFF switch Power on indicator Undervoltage (LOW) indicator & protection Over-voltage (HIGH) indicator & protection Dimensions: 10.4 x 72 x 15 mm Included 1x REKA:BIT expansion board 1x USB power and data cable 1x 4xAA battery holder 1x Mini screwdriver 3x Grove to female header cable 2x Building block 1x9 lift arm 4x Building block friction pin Please note: micro:bit board not included

    € 22,95

    Leden € 20,66

  • Joy-Car Robot for BBC micro:bit

    JOY-iT Joy-Car Robot for BBC micro:bit

    The Joy-Car is an autonomous robot based on micro:bit and offers a modular robotics learning kit. With the help of the detailed manual, all assemblies and their functions as a whole machine are explained, as well as details of programming and codes.Sensors such as line tracking, ultra sonic, infrared and wheel speed sensors provide functions such as autonomous driving and even the control via Bluetooth via a second, separate micro:bit.The additional equipment simulates indicators, lights, reversing light and horn, thus complement the experience of an autonomous robot car. With addressable LEDs, individual lighting scenarios can also be realized.SpecificationsPower Supply 4x AA batteries Alternatively: 4.5-9 VDC Functions & Features Learning the individual components as a whole machine Suitable from 9 years on, ideal for school purposes Detailed instructions for programming including codes Programming languages: Micro:Python and MakeCode Autonomous driving by line finder, ultrasonic and infrared BT-control via separate 2nd micro:bit possible Simulation of indicators, lights, reversing light and horn Compatible with micro:bit v1 and v2 Included sensors 2x Speed sensor 3x Line tracking sensor 1x Ultrasonic sensor 2x Obstacle sensor Included electronic assembly 1x Joy-Car mainboard 2x Gear motor 2x Servo motor 4x LED board 1x Battery case Dimensions189 x 171 x 77 mmIncluded items Joy-Car Acryl Kit Sensors Electronics assembly Mounting material Connection cables RequiredBBC micro:bit v1 or v2Downloads Manual MakeCode Tutorials Websitehttps://joycar.joy-it.net/en/

    € 64,95

    Leden € 58,46

  • SparkFun JetBot AI Kit v2.1 (zonder NVIDIA Jetson Nano Developer Kit)

    SparkFun SparkFun JetBot AI Kit v2.1 (zonder NVIDIA Jetson Nano Developer Kit)

    De SparkFun JetBot AI Kit V2.1 is een geweldige basis voor het maken van nieuwe AI projecten voor iedereen die geïnteresseerd is in het leren van AI en het bouwen van leuke applicaties. Het is eenvoudig op te zetten en te gebruiken en is compatibel met veel populaire accessoires. Interactieve tutorials laten je zien hoe je de kracht van AI kunt gebruiken om de SparkFun JetBot te leren objecten te volgen, botsingen te vermijden, en meer. De Jetson Nano Developer Kit (niet inbegrepen in deze kit) biedt handige tools zoals de Jetson GPIO Python bibliotheek en is geschikt voor standaard sensoren en randapparatuur; inclusief een aantal nieuwe uit het SparkFun Qwiic Ecosystem. Daarnaast wordt de meegeleverde image voorzien van de geavanceerde functionaliteit van JetBot ROS (Robot Operating System) en AWS RoboMaker Ready met AWS IoT Greengrass al geïnstalleerd. SparkFun's JetBot AI Kit is de enige kit die momenteel op de markt is die verder gaat dan de standaard JetBot voorbeelden en in de wereld van connected, intelligente robotica te stappen. De kit bevat alles wat je nodig hebt om met JetBot aan de slag te gaan, behalve een kruiskopschroevendraaier en een Ubuntu desktop GUI. Houd er wel rekening mee dat de mogelijkheid om meerdere neurale netwerken parallel te laten werken alleen mogelijk is met een volledige 5V-4A power supply. Features SparkFun Qwiic ecosystem for I2C communication Het ecosystem kan uitgebreid worden met 4x Qwiic connectors Voorbeeld-applicaties voor Basic Motion, Teleoperation, Collision avoidance, & Object Following Compacte uitvoering om bestaand neuraal netwerk van NVIDIA te optimaliseren 136° FOV camera for machine vision Pre-flashed MicroSD card Chassis biedt mogelijkheden tot uitbreiden Inclusief 64GB MicroSD card - pre-flashed SparkFun JetBot image: Nvidia Jetbot base image met geïnstalleerd: SparkFun Qwiic Python library package Driver for Edimax WiFi adapter Greengrass Jetbot ROS Leopard Imaging 136FOV wide-angle camera & ribbon cable EDIMAX WiFi Adapter SparkFun Qwiic Motor Driver SparkFun Micro OLED Breakout (Qwiic) Alle hardware & prototyping elektronica die nodig is om uw volledig functionele robot te voltooien! Benodigd NVIDIA Jetson Nano Developer Kit Hier kunt u de door SparkFun verstrekte montagehandleiding vinden!

    € 219,00

    Leden € 197,10

  • JOY-iT Grab-it Robot Arm Kit

    JOY-iT JOY-iT Grab-it Robot Arm Kit

    De Grab-it Robot arm is geproduceerd in een speciaal solide model. Het frame van de arm bestaat uit zeer solide, zwart geanodiseerd aluminium. Inbegrepen bij de levering zijn 6 PWN gestuurde servo motoren, die zijn geconstrueerd voor een druk van 20 kg/cm. Er is dus een groot gebruiksbereik en voldoende krachtreserves voor uw projecten. Het drukbereik van de precisieklauw is aangepast aan de arm en in staat om onder dezelfde druk te werken. De arm wordt geleverd met een roterende plaat (360°) waarop hij moet worden gemonteerd. De roterende plaat zal worden bevestigd op een grondplaat van 28,5 x 16 cm. Er zijn al boringen voor alle gangbare single-board computers en ontwikkelborden (Raspberry Pi, Banana Pi, Arduino,…). Voor een gemakkelijke en nauwkeurige besturing raden wij MotorPi (voor Raspberry Pi) of Motorino (voor Arduino) aan. Highlights &; Details Materiaal: robuust aluminium, zwart geanodiseerd inclusief 6 stuks 20 kg/cm PWM/servomotoren Voltagebereik 5 tot 7,4 V DC Metalen tandwieloverbrenging incl. bodemplaat met boringen voor alle gangbare single-board computers en ontwikkelborden incl. hoogwaardige precisieklauw Motoren 21,5 kg/cm koppel bij 7,4V5V-7,4 V DC spanning360° mechanische hoek, 180° werkbereikmetalen tandwielaanstuurbaar via PWMstroomopname 5 mA tot 2 A (per motor) Motor Frame Aluminium profiel Afmetingen Basisplaat 28,5 x 16 cmHoogte: afhankelijk van de positie van de arm, tot 42 cm Hoogte Bereik Bijna 30 cm vanaf het midden van de roterende plaat Basisplaat 4,5 mm acrylaat met bevestigingsmogelijkheid voor Raspberry Pi A+/B+/2/3, CubieBoard, Arduino Mega, Banana Pi M2, pcDuino en nog veel meer.Openingen met afstandhouders voor bevestiging aan een grondplaat Componenten Componenten Robot arm in enkelstuks incl. rotatie-plaat, klauw, basis-plaat en bevestigings-materiaal, 6 motoren Aanbevolen accessoires MotoPi (motorbesturing voor Raspberry Pi)Motorino (motorbesturing voor Arduino)

    € 184,95

    Leden € 166,46

  • Advanced Control Robotics (E-BOOK)

    Elektor Digital Advanced Control Robotics (E-BOOK)

    20 jaar geleden waren robots gebaseerd op eenvoudige 8-bit processoren en aanraaksensoren de norm. Nu is het mogelijk om multi-core robots te bouwen die met intelligentie op hun omgeving kunnen reageren. De robots van vandaag combineren sensorgegevens van versnellingsmeters, gyroscopen en computer vision-sensoren om hun omgeving te leren kennen. Ze kunnen reageren met geavanceerde controlealgoritmen en ze kunnen gegevens zowel lokaal als in de cloud verwerken. Dit boek, dat de theorie en best practices behandelt die samenhangen met geavanceerde robottechnologieën, is geschreven om robotici, zowel hobbyisten als professionals, te helpen hun ontwerpen naar een hoger niveau te tillen. Zoals zal blijken, vereist het bouwen van geavanceerde toepassingen geen extreem dure robottechnologie. Alles wat nodig is, is simpelweg de kennis van welke technologieën er zijn en hoe je ze het beste kunt gebruiken. Elk hoofdstuk in dit boek introduceert een van deze verschillende technologieën en bespreekt hoe deze het best kan worden gebruikt in een robotica-toepassing. Aan de hardwarekant behandelen we microcontrollers, servo's en sensoren, zodat u hopelijk geïnspireerd wordt om uw eigen ontzagwekkende systemen van de volgende generatie te ontwerpen. Aan de softwarekant behandelen we programmeertalen, debugging, algoritmen en toestandsmachines. We richten ons op de Arduino, de Parallax Propeller, Revolution Education PICAXE en projecten waarbij ik betrokken ben geweest, waaronder de TBot educatieve robot, de PropScope oscilloscoop, de 12Blocks visuele programmeertaal en de ViewPort ontwikkelomgeving. Daarnaast geven we een uitgebreide introductie tot een aantal essentiële onderwerpen, waaronder output (bv. LED's, servomotoren) en communicatietechnologieën (bv. infrarood, audio), die je kunt gebruiken om systemen te ontwikkelen die reageren op stimuli en communiceren met mensen en andere robots. Om deze onderwerpen zo toegankelijk mogelijk te maken zijn handige schema's, voorbeeldcode en praktische tips met betrekking tot bouwen en debuggen opgenomen. Hanno Sander Christchurch, Nieuw-Zeeland

    € 20,95

    Leden € 16,76

  • Sipeed Longan Nano – RISC-V GD32VF103CBT6 Development Board

    Seeed Studio Sipeed Longan Nano - RISC-V GD32VF103CBT6 Development Board

    Niet op voorraad

    Longan Nano ontwikkelbord, dubbel-rij pin layout ontwerp, naaldafstand 700 mil, kan direct in breadboard worden geplaatst; on-board 8M passieve kristal oscillator, 32.768 kHz RTC low-speed kristal oscillator, Mini TF slot, en gebruik Type-C USB interface.Longan Nano ondersteunt meerdere download methoden: USB DFU download, UART ISP download, JTAG download. In de USB DFU-downloadmodus, hebt u alleen een USB Type-C-kabel nodig om het programma naar de ontwikkelingsraad te downloaden. Tegelijkertijd ondersteunt de Longan Nano de standaard JTAG-interface, die online kan worden gedebugged met behulp van de in de winkel verkrijgbare RISC-V debugger of een JTAG-geschikte debugger zoals J-Link.In de tussentijd heeft Sipeed de PlatformIO IDE aangepast voor het Longan Nano-ontwikkelbord, dat visueel ontwikkeld kan worden op meerdere platforms, zoals Windows/Linux: https://github.com/sipeed/platform-gd32vFeatures Ingebouwd 128KB Flash, 32KB SRAM 4x 16-bits timer voor algemeen gebruik, 2x basis 16-bits timer, 1x geavanceerde 16-bits timer Waakhond, RTC, Systick 3x USART, 2x I²C, 3x SPI, 2x I²S, 2x CAN, 1x USBFS (OTG) 2x ADC (10-kanaals), 2x DAC Technische specificaties CPU GD32VF103CBT6 gebaseerd op RISC-V 32-bit kern Kernel stroomverbruik Nauwelijks 1/3 van de traditionele Cortex-M3 Ingebouwd 128KB Flash, 32KB SRAM Peripheral - 4x 16-bit timer voor algemeen gebruik, 2x basis 16-bit timer, 1x geavanceerde 16-bit timer- Watchdog, RTC, Systick- 3x USART, 2x I²C, 3x SPI, 2x I²S, 2x CAN, 1x USBFS (OTG),- 2x ADC (10-kanaals), 2x DAC Software IDE PlatformIO IDE, ondersteuning debugging, Arduino Compileer Toolchain & Debugger GCC, OpenOCD Besturingssysteem RT-Thread、LiteOS Hardware Hardware-uitbreiding Korte TF-kaartsleuf Display uitbreiding 8pin 0,5mm FPC Blok Uitbreiding 160x80 RGB IPS LCD (SPI Interface) Debug-interface 2x4 pin leads naar JTAG debug interface Connector Dubbele rij 2.54 pitch pin Kristal 8MHz Passief Hoge Snelheid Kristal +32.768KHz Lage Snelheid RTC Kristal

    Niet op voorraad

    € 9,95

    Leden € 8,96

  • FeeTech FS90 Micro Servo with Accessories

    FeeTech FS90 Micro Servo with Accessories

    Specifications Size 23.2 x 12.5 x 22 mm Weight 9 g Gear type Plastic Gear (Nylon & POM) Limit angle 120 Bearing No Ball bearings Horn gear spline 20T (4.8 mm) Horn type Plastic, POM Case Nylon & Fiberglass Connector wire 200 mm Motor Metal brush motor Spalsh water resistance No Included 1x FeeTech FS90 Servo 1x Straight single ended servo horn 1x Straight double ended servo horn 1x Winged straight double ended servo horn 1x Four-pointed star servo horn 1x Round servo horn 1x Servo horn screw 2x FS90 servo mounting screws Downloads User Guide

    € 12,95

    Leden € 11,66

  • Arduino Braccio ++ RP2040 powered Robot Arm

    Arduino Arduino Braccio ++ RP2040 powered Robot Arm

    Niet op voorraad

    De volgende evolutie van de Tinkerkit Braccio-robot, Arduino Braccio ++ is een robotarm die binnen 'Arduino Education' ontworpen is voor het hoger onderwijs als technische scholen en universitaire technologie-instituten. Uiteraard kan de nieuwe Braccio ook gebruikt worden door gevorderde middelbare scholieren en studenten die wetenschappen, industriële wetenschap of technologie studeren. De Braccio ++ is volledig geoptimaliseerd en kan op verschillende manieren worden gemonteerd voor meerdere taken, zoals het verplaatsen van objecten, het monteren van een camera en het volgen van uw bewegingen, of het bevestigen van een zonnepaneel en het volgen van de beweging van de zon. De toepassingen zijn bijna onbeperkt. Studenten leren toepassingen van natuurkundige concepten in het echte leven door een voorwerp op te tillen, te plaatsen en te draaien. Deze concepten omvatten bewegingen, krachten, koppel, overbrengingsverhoudingen, stabiliteit en het gewicht van de nuttige last. De Braccio ++ heeft een nieuwe Braccio Carrier met LCD-scherm en nieuwe RS485-servomotoren. Downloads Braccio Carrier

    Niet op voorraad

    € 499,00

    Leden € 449,10

  •  -14% YDLIDAR OS30A 3D Depth Camera

    YDLIDAR YDLIDAR OS30A 3D Depth Camera

    This camera adopts binocular structured light 3D imaging technology to obtain depth images and realize the function of depth information modeling. It is equipped with a dedicated depth computing chip and is specially optimized for robot obstacle avoidance.The camera is compact in size, easy to integrate, with USB2.0 standard output interface, providing users with a high degree of flexibility. It can be adapted to complex environments such as all-black environment, indoors with strong light or weak light, backlight or smooth light, even semi-outdoors, which has a wide range of applications.Features Offers 1280 x 920 high-resolution image output Uses the binocular structured light 3D imaging technology Fearless ambient light interference Deep calculation processors use high-performance dedicated chips USB2.0 standard output interface Specifications Detection distance: 20-250 cm Accuracy Error: <1.5 cm Resolution: 1280 x 920 Pixel HFOV: 78 ±3° VFOV: 60 ±3° Power: 1.5 W Active Light Source: Spectrum: 830-850 nm | Power: <1.5 W Dust-proof and Waterproof: IP65 ESD: Contact Discharge: ±8 KV | Antiaircraft: ±12 KV Interface: USB2.0 Operating Temperature: -10~50 °C Operating Humidity: 0~80 RH Storage Temperature: -20~80 °C Weight: 96 g Downloads Datasheet User Manual Development Manual SDK Tool ROS

    € 139,95€ 119,95

    Leden identiek

  • Sipeed MAix Bit Suit with LCD and Camera

    Seeed Studio Sipeed MAix Bit Suit with LCD and Camera

    Niet op voorraad

    Sipeed AI & IoT board is not only hardware but also provide an end-to-end, hardware + software infrastructure for the deployment of AI-based solutions.Sipeed AI & IoT board can be used for a growing number of use-cases such as: predictive maintenance machine vision voice recognition anomaly detection robotics Specifications CPU: RISC-V Dual Core 64bit, 400Mh adjustable Powerful dual-core 64-bit open architecture-basedprocessor with rich community resources Debugging Support High-speed UART and JTAG interface for debugging GPIO interface All GPIOs connected to header 2*20 2.54mm Micro SD card(TF card) slot Support Self-elastic card holder One-click Download circuit Just connect the USB typeC cable to complete the downloadOnboard CH340, 2Mbps baud rate DVP Camera connector 24P 0.5mm FPC connector LCD connector 8bit MCU LCD 24P 0.5mm FPC connector Button RST button and USR button CPU 1st competitive RISC-V chip 28nm process, dual-core RISC-V 64bit IMAFDC, on-chip huge 8MB high-speed SRAM, 400MHz frequency (able up to 800MHz) KPU (Neural Network Processor): 64 KPU 576bit width convolution kernels any form of activation function. 0.25TOPS (trillion operations per second) @ 0.3W 400MHz, When overclocked to 800MHz, it offers 0.5TOPS APU (Audio Processor) 8 mics up to 192 kHz sample rate FFT unit Flexible FPIOA (Field Programmable IO Array), you can map 255 functions to all 48 GPIOs on the chip DVP camera and MCU LCD interface, you can connect a DVP camera, run your algorithm, and display on LCD Other accelerators and peripherals AES Accelerator SHA256 Accelerator FFT Accelerator (not APU's one) OTP UART WDT IIC SPI I2S TIMER RTC PWM SoftwareThe Sipeed AI & IoT board supports original standalone SDK, FreeRTOS SDK based on C/C++.You can port micropython on it: http://en.maixpy.sipeed.com/. It also supports FPIOA, GPIO, TIMER, PWM, Flash, OV2640, LCD. And it has zmodem, vi, SPIFFS on it, so that you can edit python directly or sz/rz file to board.Seedstudio offers even more support to your project with their GitHub contributions:https://github.com/sipeed/MaixPyhttps://github.com/sipeed/MaixPy_Doc_Us_En_Backup Deep LearningThe Sipeed AI & IoT board supports a fixed-point model that the mainstream training framework trains, according to specific restriction rules, and have a model compiler to compile models to its model format.It supports tiny-yolo, mobilenet-v1, and, TensorFlow Lite! Many TensorFlow Lite model can be compiled and run on the Sipeed AI & IoT board!Software Features Support FreeRtos and Standard development kit Support MicroPython on M1 Machine vision based on convolutional neural network High-performance microphone array processor Electrical Specifications Supply voltage 4.8 V ~ 5.2 V Supply current > 600 mA Temperature rise < 30 K Working temperature - 30 ℃ ~ 85 ℃

    Niet op voorraad

    € 34,95

    Leden € 31,46

  • Sipeed MAix BiT for RISC-V AI + IoT

    Seeed Studio Sipeed MAix BiT for RISC-V AI + IoT

    Niet op voorraad

    AI is pervasive today, from consumer to enterprise applications. With the explosive growth of connected devices, combined with a demand for privacy/confidentiality, low latency and bandwidth constraints, AI models trained in the cloud increasingly need to be run at the edge.MAix is Sipeed’s purpose-built module designed to run AI at the edge, we called it AIoT. It delivers high performance in a small physical and power footprint, enabling the deployment of high-accuracy AI at the edge, and the competitive price make it possible embed to any IoT devices. As you see, Sipeed MAIX is quite like Google edge TPU, but it act as master controller, not an accelerator like edge TPU, so it is more low cost and low power than AP+edge TPU solution.Features It is twice of M1 size, 1x2 inch size, breadboard-friendly, and also SMT-able It integrate USB2UART chip, auto download circuit, RGB LED, DVP Camera FPC connector(support small FPC camera and standard M12 camera), MCU LCD FPC connector (support our 2.4 inch QVGA LCD), TF card slot. MAix BiT is able to adjust core voltage! you can adjust from 0.8V~1.2V, overclock to 800MHz! Technical Specification CPU: RISC-V Dual Core 64bit, 400MHz adjustable Powerful dual-core 64-bit open architecture-based processor with rich community resources Debugging Support High-speed UART and JTAG interface for debugging GPIO interface All GPIOs connected to header 2*20 2.54mm Micro SD card (TF card) slot Support Self-elastic card holder One-click Download circuit Just connect the USB typeC cable to complete the downloadOnboard CH340, which support 2Mbps baudrate DVP Camera connector 24P 0.5mm FPC connector LCD connector 8bit MCU LCD 24P 0.5mm FPC connector Button RST button and USR button

    Niet op voorraad

    € 24,95

    Leden € 22,46

  • ROBOTIS TurtleBot3 Burger (incl. Raspberry Pi 4)

    ROBOTIS TurtleBot3 Burger (incl. Raspberry Pi 4)

    Niet op voorraad

    World’s Most Popular ROS PlatformTurtleBot is the most popular open source robot for education and research. The new generation TurtleBot3 is a small, low cost, fully programmable, ROS based mobile robot. It is intended to be used for education, research, hobby and product prototyping.Affordable CostTurtleBot was developed to meet the cost-conscious needs of schools, laboratories and companies. TurtleBot3 is the most affordable robot among the SLAM-able mobile robots equipped with a 360° Laser Distance Sensor LDS-01.Small SizeThe dimension of TurtleBot3 Burger is only 138 x 178 x 192 mm (L x W x H). Its size is about 1/4 of the size of the predecessor. Imagine keeping TurtleBot3 in your backpack and develop your program and test it anywhere you go.ROS StandardThe TurtleBot brand is managed by Open Robotics, which develops and maintains ROS. Nowadays, ROS has become the go-to platform for all the roboticists around the world. TurtleBot can be integrated with existing ROS-based robot components, but TurtleBot3 can be an affordable platform for whom want to get started learning ROS.ExtensibilityTurtleBot3 encourages users to customize its mechanical structure with some alternative options: open source embedded board (as a control board), computer and sensors. TurtleBot3 Burger is a two-wheeled differential drive type platform but it is able to be structurally and mechanically customized in many ways: Cars, Bikes, Trailers and so on. Extend your ideas beyond imagination with various SBC, sensors and motors on a scalable structure.Modular Actuator for Mobile RobotTurtleBot3 is able to get a precise spatial data by using 2 DYNAMIXEL’s in the wheel joints. DYNAMIXEL XM series can be operated by one of 6 operating modes (XL series: 4 operating modes): Velocity control mode for wheels, Torque control mode or Position control mode for joint, etc. DYNAMIXEL can be used even to make a mobile manipulator which is light but can be precisely controlled with velocity, torque and position control. DYNAMIXEL is a core component that makes TurtleBot3 perfect. It is easy to assemble, maintain, replace and reconfigure.Open Control Board for ROSThe control board is open-sourced in hardware wise and in software wise for ROS communication. The open source control board OpenCR1.0 is powerful enough to control not only DYNAMIXEL’s but also ROBOTIS sensors that are frequently being used for basic recognition tasks in cost effective way. Various sensors such as Touch sensor, Infrared sensor, Color sensor and a handful more are available. The OpenCR1.0 has an IMU sensor inside the board so that it can enhance precise control for countless applications. The board has 3.3 V, 5 V, 12 V power supplies to reinforce the available computer device lineups.Strong Sensor LineupsTurtleBot3 Burger uses enhanced 360° LiDAR, 9-Axis Inertial Measurement Unit and precise encoder for your research and development.Open SourceThe hardware, firmware and software of TurtleBot3 are open source which means that users are welcomed to download, modify and share source codes. All components of TurtleBot3 are manufactured with injection molded plastic to achieve low cost, however, the 3D CAD data is also available for 3D printing.Specifications Maximum translational velocity 0.22 m/s Maximum rotational velocity 2.84 rad/s (162.72 deg/s) Maximum payload 15 kg Size (L x W x H) 138 x 178 x 192 mm Weight (+ SBC + Battery + Sensors) 1 kg Threshold of climbing 10 mm or lower Expected operating time 2h 30m Expected charging time 2h 30m SBC (Single Board Computers) Raspberry Pi 4 (2 GB RAM) MCU 32-bit ARM Cortex-M7 with FPU (216 MHz, 462 DMIPS) Actuator XL430-W250 LDS (Laser Distance Sensor) 360 Laser Distance Sensor LDS-01 or LDS-02 IMU Gyroscope 3 AxisAccelerometer 3 Axis Power connectors 3.3 V/800 mA5 V/4 A12 V/1 A Expansion pins GPIO 18 pinsArduino 32 pin Peripheral 3x UART, 1x CAN, 1x SPI, 1x I²C, 5x ADC, 4x 5-pin OLLO DYNAMIXEL ports 3x RS485, 3x TTL Audio Several programmable beep sequences Programmable LEDs 4x User LED Status LEDs 1x Board status LED1x Arduino LED1x Power LED Buttons and Switches 2x Push buttons, 1x Reset button, 2x Dip switch Battery Lithium polymer 11.1 V 1800 mAh / 19.98 Wh 5C PC connection USB Firmware upgrade via USB / via JTAG Power adapter (SMPS) Input: 100-240 VAC 50/60 Hz, 1.5 A @maxOutput: 12 VDC, 5 A Downloads ROS Robot Programming GitHub E-Manual Community

    Niet op voorraad

    € 739,00

    Leden identiek

  • € 64,95

    Leden € 58,46

  • Unitree Quadruped Go1 Edu Plus (NVIDIA NX)

    Unitree Quadruped Go1 Edu Plus (NVIDIA NX)

    Unitree Go1 series consists of quadruped robots for the research & development of autonomous systems in the fields of human-robot interaction (HRI), SLAM & transportation. Due to the four legs, as well as the 12DOF, this robot can handle a variety of different terrains. The Go1 comes with a perfected drive & power management system, which enables a speed (depending on the version) of up to 3.7 m/s or 11.88 km/h with an operating time of up to 2.5 hours. Furthermore, the motors have a torque of 23.70N.m at the body/thighs and 35.55N.m at the knees, which also allow jumps or backflips. Features High Dynamics 17 km/h Intelligent Side-Follow System (ISS) Super Sensory System (SSS) 10-view Detection AI Detection, Human Recognition, etc. Flexible and adaptive Joints Long Endurance Specifications Light and Compact Weight: 12 kg Size (folded): 0.588 x 0.29 x 0.22 m High Performance Max Speed: 4.7 m/s (17 kmh or 10.6 mph) Intelligent Side Follow System (Adopt Patented Wireless Vector Positioning and Control Technology) Robot dog can walk alongside its owner and not only follow The human-machine interaction is both harmonious and safe Super Sensory System Full View Coverage 5 Sets Fish-Eye Stereo Depth Cameras + AI Post-processing + 3 Sets of Hypersonic Sensors Lens Angle: 150 x 170° Built-in Powerful AI 16-core CPU + GPU (384 Cores, 1.5 TFLOPS) ISS and SSS Function Cooperatively Strong & Reliable Power System New Power Joint with Super Lightweight Low Noise and Long Life Heat Pipe Cooling System Built in the Knee Joint Motor Body/thigh joints: C1-8: 520 g 23.70N.m Knee Joint: C1-8 x 1.5 ratio 35.55N.m Unitree Go1 Variants The Go1 series has 3 variants (Go1 Air, Go1 Pro and Go1 Edu), which differ a little technically. The differences are mainly the processors and sensor systems, the Air and Pro variant works, depending on the model, with one or 3x (4x 1.43 GHz 128 Cores 0.5 T) processor as well as with 1 or 5 super sensor systems. Both variants are equipped with 3 ultrasonic sensors. The Go1 Edu variant has up to 3 nano processors, 5 super sensor systems, and 4 ultrasonic sensors. In contrast, Edu Plus is equipped with an Nvidia Jetson Xavier NX as standard. Model Comparison   Go1 Air Go1 Pro Go1 Edu Go1 Edu Plus SSS 1 Super-sensing system 1 set 5 sets 5 sets 5 sets Sensing calculation 1x (4x 1.43 GHz 128 Cores 0.5 T) 3x (4x 1.43 GHz 128 Cores 0.5 T) 3 Jetson Nano 2 Jetson Nano + 1 NVIDIA Jetson NX ISS 1 Intelligent Concomitant ✓ ✓ ✓ ✓ RTT 1 Pictures Transaction ✓ ✓ ✓ ✓ Charger 24 V, 4 V 24 V, 6 V 24 V, 6 V 24 V, 6 V Remote Control ✓ ✓ ✓ ✓ Load ≈3 kg ≈3 kg ≈5 kg (max ~10 kg) ≈5 kg (max ~10 kg) Heat Pipe Assisted Heat Dissipation ✓ ✓ ✓ ✓ Motion Speed 0~2.5 m/s 0~3.5 m/s 0~3.7 m/s (max ~5 m/s) 0~3.7 m/s (max ~5 m/s) Battery 1x 1x 1x 1x Graphical Programming Interface ✓ ✓ ✓ ✓ Scientific Programming Interface     ✓ ✓ Python Programming Interface     ✓ ✓ HAI 1 Human Sensing     ✓ ✓ APP Top View   ✓ ✓ ✓ 4G     ✓ ✓ Foot-end Physical Force Sensor     ✓ ✓ Multifunctional Peripheral Expansion Interface     ✓ ✓ Radar     2D or 3D optional 2D or 3D optional Included 1x Unitree Go1 1x Unitree Go1 Battery 1x Unitree Go1 Charger 1x Unitree Go1 Remote Controller Downloads User Manual GitHub

    € 14.399,00

    Leden identiek

Login

Wachtwoord vergeten?

Heb je nog geen account?
Maak gratis een account aan en geniet van vele voordelen.