Sensors & LiDAR

74 producten


  •  -33% MightyOhm Geigerteller kit (incl. behuizing)

    MightyOhm MightyOhm Geigerteller kit (incl. behuizing)

    Heb je je ooit afgevraagd of de voorwerpen in je huis radioactief zijn of niet? Geeft de appel in je koelkast straling af? Geven de boeken in je boekenkast gammastraling af? Daar kom je gemakkelijk achter door je eigen geigerteller te bouwen! Dankzij de seriële logging-functie kun je de blootstelling in de tijd volgen en kun je de mute-knop gebruiken om straling te detecteren zonder geluid. Meet bèta- en gammastraling met je eigen draagbare geigerteller! Kenmerken 100% open source-hardware! Gevoelig voor bèta- en gammastraling LED en piëzo-speaker waarschuwen je voor gedetecteerde radioactiviteit. Mute-knop voor stille werking. Een ATtiny2313 microcontroller dat smeekt om aangepast te worden! Ondersteuning voor verschillende veelvoorkomende Geiger-Müller-buizen: SI-3BG, SI-1G en SBM-20. HV-voeding kan worden aangepast van ~300-600 V. Headers voor seriële interface (9600 baud), in-circuit programmering van de AVR-microcontroller en pulsuitgang (om de geigerteller met andere dingen te verbinden!) Seriële datalogging! Tellingen per seconde (CPS), tellingen per minuut (CPM) en de equivalente dosis worden eenmaal per seconde gerapporteerd via de seriële poort. Inbegrepen Geigerteller kit met PCB en alle elektronische onderdelen 1x SBM-20 Geiger-Müller buis 1x Lasergesneden behuizing van acryl Downloads Assembly Instructions Case Assembly Instructions Design Files Source Code Usage Instructions

    € 134,95€ 89,95

    Leden identiek

  •  -40% Elektor 37-in-1 Sensor Kit

    Elektor Labs Elektor 37-in-1 Sensor Kit

    Niet op voorraad

    De Elektor Sensor kit bevat: 1x Joystick 1x Relay 1x Big Sound 1x Small Sound 1x Tracking 1x Avoidance 1x Flame 1x Linear Hall Sensor 1x Touch 1x Digital Temperature 1x Buzzer 1x Passive Buzzer 1x RGB LED 1x SMD RGB 1x Two Color (5 mm) 1x Mini Two Color (3 mm) 1x Reed Switch 1x Mini Reed Switch 1x Heartbeat 1x 7 Color Flash 1x Laser Emitter 1x PCB mounted push button 1x Shock, a rolling-ball type Tilt Switch 1x Rotary Encoders 1x Rolling ball Tilt Switch 1x Photoresistor 1x Temp and Humidity 1x Analog Hall 1x Hall Magnetic 1x DS18B20 Temp 1x Analog Temp 1x IR Emission 1x IR Receiver 1x Tap Module 1x Light Blocking Let op: om veiligheidsredenen is de Mercury Tilt Switch en de Light Cup in de momenteel verkrijgbare sensordozen niet meer aanwezig! Downloads Manual

    Niet op voorraad

    € 49,95€ 29,95

    Leden identiek

  • OPEN-SMART GPS – Serial GPS Module for Arduino (APM2.5 Flight Control)

    Kuongshun OPEN-SMART GPS - Serial GPS Module for Arduino (APM2.5 Flight Control)

    Specificaties Bedrijfsfrequentie L1 (1575,42 ±10 MHz) Bedrijfsspanning 3,3 - 5,2 V Bedrijfsstroom Normale modus: 50 mA Energiebesparende modus: 30 mA Communicatie-interface TL seriële poort, microUSB-interface Seriële poort Baudrate 9600 bps Communicatie formaat 8N1 Interface Logic Voltage 3,3 of 5 V Externe Antenne-Interface IPX Afmetingen 2,2 x 2,1 x 0,5 cm Gewicht 8,5 g

    € 10,95

    Leden € 9,86

  • Makerfabs RC522 RFID Reader met Cards Kit (13.56 MHz)

    Makerfabs Makerfabs RC522 RFID Reader met Cards Kit (13.56 MHz)

    Niet op voorraad

    Deze RC522 RFID Kit bevat een 13,56 MHz RF-lezermodule die gebruik maakt van een RC522 IC en twee S50 RFID-kaarten om u te helpen bij het leren en toevoegen van de 13,56 MHz RF-overgang aan uw project. De MF RC522 is een sterk geïntegreerde transmissiemodule voor contactloze communicatie op 13,56 MHz. RC522 ondersteunt ISO 14443A/MIFARE mode.De module maakt gebruik van SPI om met microcontrollers te communiceren. De open-hardware gemeenschap heeft al heel wat projecten die gebruik maken van de RC522 - RFID Communicatie, met behulp van Arduino.Features Bedrijfsstroom: 13-26 mA/DC 3,3 V Lijstroom: 10-13 mA/DC 3,3 V Slaapstroom: <80 uA Piekstroom: <30 mA Bedrijfsfrequentie: 13,56 MHz Gesteunde kaarttypen: mifare1 S50, mifare1 S70 MIFARE Ultralight, Mifare Pro, MIFARE DESFire Milieu Operationele Temperatuur: -20-80 graden Celsius Opslagtemperatuur: -40-85 graden Celsius Relatieve vochtigheid: relatieve vochtigheid 5% -95% Lezer afstand: ≥50 mm/1.95' (Mifare 1) Modulegrootte: 40×60 mm/1.57*2.34' Module interfaces SPI Parameter Gegevensoverdrachtsnelheid: maximaal 10 Mbit/s Inbegrepen 1x RFID-RC522 module 1x Standaard S50 blanco kaart 1x S50 speciaal-vormige kaart (zoals aangegeven door de vorm van de sleutelhanger) 1x rechte pin 1x gebogen pin Downloads Arduino-bibliotheek MFRC522 Datasheet MFRC522_ANT Mifare S50

    Niet op voorraad

    € 5,95

    Leden € 5,36

  • YDLIDAR X4 Lidar – 360-degree Laser Range Scanner (10 m)

    YDLIDAR YDLIDAR X4 Lidar 360-degree Laser Range Scanner (10 m)

    Niet op voorraad

    Kenmerken 360 graden scanner afstandsmeting Lage meetfout; stabiele afstandsmeting en hoge nauwkeurigheid Afstand metingen: 0,12-10 m Bestand tegen omgevingslicht interferentie Motoraandrijving van industriële kwaliteit voor stabiele prestaties Laserkwaliteit: Class I 360 graden omnidirectioneel scannen; 6-12 Hz adaptieve scanfrequentie Range finder frequentie: 5000 times/s Toepassingen Robot navigatie en het vermijden van obstakels Robot ROS onderwijs en onderzoek Regionale veiligheid Omgevingsscan en 3D-reconstructie Navigatie bij homeservice robots / stofzuigrobots en obstakels vermijden Specificaties Range frequentie 5000 Hz Scanning frequentie 6-12 Hz Bereik 0.12-10 m Scanning hoek 0-360° Range resolutie < 0.5 mm (bereik < 2 m)< 1% van werkelijke afstand (bereik > 2 m) Hoek resolutie 0.48-0.52° Voedingsspanning 4,8-5,2 V Spanningsrimpel 0-100 mV Stroomgebruik opstart 400-480 mA Stroomgebruik slaapstand 280-340 mA Stroomgebruik in bedrijf 330-380 mA Baud rate 128000 bps Signaal hoog 1,8-3,5 V Signaal laag 0-0,5 V PWM frequentie 10 kHz Duty cycle bereik 50-100 % Laser golflengte 775-795 nm Laser vermogen 3 mW FDA Class I Gebruikstemperatuur 0-40 °C Omgevingslicht 0-2000 Lux Gewicht 189 g Afmeting 102 x 71 x 63 mm Interface UART: LVTTL Level standard Ondersteuning instelbare scanfrequentie: Ja Ondersteuning laag vermogen: Ja Pin configuratie VCC Voeding 5 V Tx Uitgang Rx Ingang GND Aarde M_EN Motor inschakelen 3,3 V DEV_EN Ranging inschakelen 3,3 V M_SCTP Motor snelheid aansturing 1,8 V NC Reserve pin Development ondersteuning Linux-schijf: Ja Windows-schijf: Ja Downloads zijn hier beschikbaar.

    Niet op voorraad

    € 99,95

    Leden € 89,96

  •  -31% Makerfabs PN532 NFC Module V3

    Makerfabs Makerfabs PN532 NFC Module V3

    NFC is de laatste jaren een populaire technologie. Bijna alle high-end telefoons op de markt ondersteunen NFC. Near field communication (NFC) is een reeks standaarden voor smartphones en soortgelijke apparaten om radiocommunicatie met elkaar tot stand te brengen door ze tegen elkaar aan te raken of ze in elkaars nabijheid te brengen, meestal niet meer dan enkele centimeters. Deze module is gebouwd rond NXP PN532. NXP PN532 is zeer populair op het gebied van NFC. Makerfabs heeft deze module ontwikkeld op basis van het officiële document. Een bibliotheek voor deze module is beschikbaar. Features Kleine afmetingen en eenvoudig in te bouwen in uw project Ondersteunt I²C, SPI, en HSU (High-Speed UART), gemakkelijk om te schakelen tussen deze modi Ondersteunt RFID lezen en schrijven, P2P communicatie met peers, NFC met Android telefoon Tot 5 ~ 7 cm leesafstand On-board level shifter, standaard 5 V TTL voor I²C en UART, 3,3 V TTL SPI Arduino compatibel, plugin en spelen met ons schild RFID lezer / schrijver ondersteunt Mifare 1k, 4k, Ultralight, en DESFire kaarten ISO/IEC 14443-4 kaarten zoals CD97BX, CD light, Desfire, P5CN072 (SMX) Innovision Jewel-kaarten, zoals IRT5001-kaarten FeliCa-kaarten, zoals RCS_860 en RCS_854 Downloads Gebruik NFC Bibliotheek

    € 12,95€ 8,95

    Leden identiek

  • HC-SR501 PIR Motion Sensor Module

    Kuongshun HC-SR501 PIR Motion Sensor Module

    HC-SR501 auto-senses light for various applications (in house, basement, outdoor, warehouse, garage, etc,) for ventilator control, alarm, etc.Features Automatic infrared detection (LHI778 probe design)Output goes high when objects enter the sensing range, and automatically returns to low when object leaves Optional photosensitive control Optional temperature compensation Trigger mode jumper L: Non-repeatable / delay mode: sensor goes low after the delay, regardless of the presence of the object. H: Repeatable: sensor stays high as long as any object is detected during the delay time. Wide operating voltage range Micro-amp power Output high signal: easy to achieve docking with the various types of circuit. Infrared technology (LHI778 probe design) High sensitivity | high reliability Widely used especially for battery-powered products Specifications Voltage 4.8 V – 20 V Current (idle) <50 µA Logic output 3.3 V / 0 V Delay time 0.3 s – 200 s, custom up to 10 min Lock time 2.5 s (default) Trigger repeat : L = disable , H = enable Sensing range <120 °, within 7 m Temperature – 15 ~ +70 °C Dimension 32 x 24 mmscrew-screw 28 mm, M2 Lens diameter: 23 mm

    € 5,95

    Leden € 5,36

  • YDLIDAR TG15 Outdoor Lidar – 360-degree Laser Range Scanner (15 m)

    YDLIDAR YDLIDAR TG15 Outdoor Lidar 360-degree Laser Range Scanner (15 m)

    Kenmerken 360 graden omnidirectionele scannende afstandsmeting Kleine afstandsfout, stabiele prestaties en hoge nauwkeurigheid IP65 beschermingsgraad Sterke weerstand tegen storingen door omgevingslicht Borstelloze motoraandrijving van industriële kwaliteit voor stabiele prestaties Laservermogen voldoet aan klasse I laserveiligheidsnormen 5-12 Hz adaptieve aftastfrequentie (ondersteuning voor maatwerk) Fotomagnetische fusietechnologie voor draadloze communicatie, draadloze voeding Bereikfrequentie tot 20 kHz (maatwerk mogelijk) Toepassingen Robotnavigatie en obstakelvermijding Industriële automatisering Robot ROS onderwijs en onderzoek Regionale veiligheid Smart vervoer Milieu scannen en 3D reconstructie Commerciële robot / Robotstofzuiger Downloads Datasheet Gebruikershandleiding Ontwikkelhandleiding SDK TOOL ROS

    € 374,00

    Leden € 336,60

  • Wind and Rain Sensors for Weather Station (Wind Vane, Anemometer, Rain Gauge)

    Pimoroni Wind and Rain Sensors for Weather Station (Wind Vane, Anemometer, Rain Gauge)

    Wil je je eigen weerstation bouwen? Deze sensorkit heeft een anemometer met halve bollen en een windvaantje, waarmee de windsnelheid en -richting kan worden gemeten. Ook heeft hij en een regenmeter in de vorm van een kantelbakje, compleet met bijbehorend bevestigingsmateriaal.De sensoren in deze kit zijn actieve mechanische sensoren die fysiek de wind en de regen meten. Ze gebruiken magneten, reed-schakelaars en bewegende delen om eenvoudige signalen te genereren die een microcontroller of single board computer kan lezen om hiermee de windsnelheid, de windrichting en de hoeveelheid regen te berekenen.De sensorkabels hebben RJ11-connectoren (elke sensor gebruikt echter maar twee draden, dus als je wilt kun je de uiteinden afknippen en de draden op een ander soort connector aansluiten). De armaturen om de sensoren te bevestigen zijn inbegrepen, evenals een korte metalen mast die met de meegeleverde jubilee clips aan de bovenkant van een geschikte paal kan worden vastgemaakt.Houd er rekening mee dat deze kit alleen de mechanische wind- en regensensoren bevat en geen elektronische componenten. Je kunt deze sensoren aansluiten op de Pimoroni Weather HAT voor de Raspberry Pi.Inbegrepen Windvaan Anemometer (windsnelheidsmeter) Regenmeter Korte metalen mast (gemaakt van twee metalen staven die in elkaar passen) Twee kunststof armaturen voor de bevestiging van de sensoren Bevestigingsmateriaal: jubileumclips, moeren, bouten en kabelbinders Documentatie Aan de slag met Weather HAT Uitgebreide beschrijving Datasheet

    € 89,95

    Leden € 80,96

  • Makerfabs NFC Stickers (6 pcs)

    Makerfabs Makerfabs NFC Stickers (6 pcs)

    Features NFC chip material: PET + Etching antenna Chip: NTAG216 (compatible with all NFC phones) Frequency: 13.56 MHz (High Frequency) Reading time: 1-2 ms Storage capacity: 888 bytes Read and write times: > 100,000 times Reading distance: 0-5 mm Data retention: > 10 years NFC chip size: Diameter 30 mm Non-contact, no friction, the failure rate is small, low maintenance costs Read rate, verification speed, which can effectively save time and improve efficiency Waterproof, dustproof, anti-vibration No power comes with an antenna, embedded encryption control logic, and communication logic circuit Included 1x NFC Stickers (6-color kit)

    € 9,95

    Leden € 8,96

  • Enviro+ Environmental Monitoring Station for Raspberry Pi

    Pimoroni Enviro+ Environmental Monitoring Station for Raspberry Pi

    1 review

    Designed for environmental monitoring, Enviro+ lets you measure air quality (pollutant gases and particles*), temperature, pressure, humidity, light, and noise level. Enviro+ is an affordable alternative to environmental monitoring stations that can cost tens of thousands of pounds and, best of all, it's small and hackable and lets you contribute your data to citizen science efforts to monitor air quality via projects like Luftdaten. Features BME280 temperature, pressure, humidity sensor (datasheet) LTR-559 light and proximity sensor (datasheet) MICS6814 analog gas sensor (datasheet) ADS1015 analog to digital converter (ADC) (datasheet) MEMS microphone (datasheet) 0.96' colour LCD (160 × 80) pHAT-format board Fully-assembled Compatible with all 40-pin header Raspberry Pi models Pinout Python library Citizen science air quality monitoring This board was developed in collaboration with the University of Sheffield, with the aim of letting you contribute real-time air quality data from your local area to open data projects like Luftdaten. Devices like Enviro+ allow fine-grained, detailed datasets that let us see shifts in air quality through time and across different areas of cities. The dataset gets better in quality every time an additional The more devices that contribute data, the better quality the dataset becomes. Particulate matter (PM) is made up of tiny particles that are a mix of sizes and types, like dust, pollen, mould spores, smoke particles, organic particles and metal ions, and more. Particulates are much of what we think of as air pollution. The analog gas sensor can be used to make qualitative measurements of changes in gas concentrations, so you can tell broadly if the three groups of gases are increasing or decreasing in abundance. Without laboratory conditions or calibration, you won't be able to say 'the concentration of carbon monoxide is n parts per million', for example. Temperature, air pressure and humidity can all affect particulate levels (and the gas sensor readings) too, so the BME280 sensor on Enviro+ is really important to understanding the other data that Enviro+ outputs. You can implement Enviro+ in IoT applications as well. By connection it to Alexa you can get information about the temperature and humidity of the air by simply asking, or there's also an option to set up a trigger action with IFTTT that turns your Philips Hue lights on when the light level drops below a certain level etc. Software With the Python library you can control control all the parts of your Enviro+. There's a bunch of examples for each of the individual parts, an all-in-one example that shows you the data from Enviro+'s sensors in a visual way.

    € 64,95

    Leden € 58,46

  • Dragino LSN50v2-S31 LoRaWAN Temperature & Humidity Sensor (EU868)

    Dragino Dragino LSN50v2-S31 LoRaWAN Temperature & Humidity Sensor (EU868)

    De temperatuur- en vochtigheidssensor die wordt gebruikt in de LSN50v2-S31 is de SHT31, een volledig gekalibreerde, lineaire en temperatuurgecompenseerde digitale uitvoer van Sensirion. Deze biedt een hoge betrouwbaarheid en stabiliteit op lange termijn. De SHT31 is bevestigd in een waterdichte anticondens behuizing voor jarenlang gebruik.De LSN50v2-S31 ondersteunt een temperatuur- en vochtigheidsalarmfunctie, waarmee de gebruiker een alarm kan krijgen voor een onmiddellijke notificatie. De LSN50v2-S31 wordt gevoed door een 8500mAh Li-SOCI2 batterij, en is ontworpen voor een langdurig gebruik van 10 jaar.Elke LSN50v2-S31 wordt vooraf voorzien van een set unieke sleutels voor LoRaWAN-registratie. Registreer deze sleutels bij de lokale LoRaWAN-server en de sensor zal na het inschakelen automatisch verbinding maken.Kenmerken LoRaWAN v1.0.3 Klasse A Ultralaag stroomverbruik Externe SHT31 probe van 3m Meetbereik -40°C ~ 80°C Temperatuur alarm AT-commando’s om parameters te wijzigen Uplink periodiek aan of op interrupt basis Downlink om de configuratie te kunnen wijzigen Toepassingen Draadloze alarm- en beveiligingssystemen Domotica en gebouwautomatisering Geautomatiseerde meteruitlezing Industriële monitoring en controle Irrigatiesystemen voor lange afstand Temperatuursensor Bereik: -40 tot + 80 °C Nauwkeurigheid: ±0,2 @ 0-90 °C Resolutie: 0,01°C Lange termijn shift: <0,03 °C/jr Humidity Sensor Bereik: 0 ~ 99,9% RH Nauwkeurigheid: ± 2% RH (0 ~ 100% RH) Resolutie: 0,01% RH Lange termijn shift: <0,25% RH / jaar Downloads Datasheet User Manual Firmware

    € 69,95

    Leden € 62,96

  • Raspberry Pi Sense HAT

    Raspberry Pi Foundation Raspberry Pi Sense HAT

    Niet op voorraad

    The official Sense HAT from the Raspberry Pi Foundation is an add-on board for Raspberry Pi (4, 3, 2, B+ and A+). The Sense HAT has the following sensors: 8x8 RGB LED matrix display Accelerometer Gyroscope Magnetometer Air pressure sensor Temperature Humidity sensor Five-button joystick

    Niet op voorraad

    € 34,95

    Leden € 31,46

  • Dragino LDS02 LoRaWAN Door Sensor (EU868)

    Dragino Dragino LDS02 LoRaWAN Door Sensor (EU868)

    The LDS02 is powered by 2x AAA batteries and targets long-time use, these two batteries can provide about 16,000 ~ 70,000 uplink packets. After the batteries run out, the user can easily open the enclosure and replace them with 2 common AAA batteries. It will send periodically data every day as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. The user can also disable the uplink for each open/close event, instead, the device can count each open event and uplink periodically. It also has the open alarm feature, the user can set this feature so the device will send an alarm if the door has been open for a certain time. Each LDS02 is pre-load with a set of unique keys for LoRaWAN registration, register these keys to the LoRaWAN server and it will auto-connect after power on. Features LoRaWAN v1.0.3 Class A SX1262 LoRa Core Door Open/Close detect 2 x AAA LR03 Batteries Door open/close statistics AT Commands to change parameters Uplink on periodically and open/close action Open duration alarm Downlink to change configure Applications Wireless Alarm and Security Systems Home and Building Automation Industrial Monitoring and Control

    € 34,95

    Leden € 31,46

  •  -17% DFRobot Gravity – Lightning Distance Sensor

    DFRobot DFRobot Gravity - Lightning Distance Sensor

    Nog 3 op voorraad

    The embedded man-made disturber rejection algorithm can effectively avoid the electrical interference generated by various household appliances. In addition to allowing general weather enthusiasts to measure local thunderstorm data simply and efficiently, thanks to its compact size and wide detection range, it can also be embedded in various smart wearable devices for an outdoor climber or people who work at heights.This provides early warning of thunderstorms that people can perceive so that people can take precautions a step ahead. The sensor can also be embedded in the indoor protection device inside lightning-sensitive equipment, and automatically trigger these devices to switch to the backup power to isolate the power grid when lightning strikes. At the moment of lightning, the interrupt pin IRQ generates a pulse. This can be used to trigger the shutter to open, helping photographers to accurately capture the exciting moment of lightning.The maximum estimated distance of lightning strike is 40km. Limited by the inherent measurement method and algorithm, the distance estimation resolution is 1~4km, 40 km in 15 steps.Features Lightning detection within 40km in 15 steps Lighting intensity detection Used both indoors or outdoors Embedded man-made disturber rejection algorithm Applications Consumer Weather Station (thunderstorm measurement) Wearable Devices (outdoor thunderstorm early warning) Lightning Photography Specification Input Voltage : 3.3 V - 5.5 V Maximum Detection Range: 40 km Distance Detection Resolution: 1 km - 4 km Intensity Detection Resolution: 21 bits, i.e. 0 ~16777201 I2C Address: Three options 0x03, 0x02, 0x01 Interface: Gravity I2C (logic level: 0-VCC) Dimension: 30 mm x 22 mm For more information, check out the DFRobot Gravity – Lightning Distance Sensor wiki page here.

    Nog 3 op voorraad

    € 29,95€ 24,95

    Leden identiek

  • Dragino LWL01 LoRaWAN Water Leak Sensor (EU868)

    Dragino Dragino LWL01 LoRaWAN Water Leak Sensor (EU868)

    LWL01 is powered by a CR2032 coin battery, in a good LoRaWAN Network Coverage case, it can transmit as many as 12,000 uplink packets (based on SF 7, 14 dB). In poor LoRaWAN network coverage, it can transmit ~ 1,300 uplink packets (based on SF 10, 18.5 B). The design goal for one battery is up to 2 years. User can easily change the CR2032 battery for reuse. The LWL01 will send periodically data every day as well as for water leak event. It also counts the water leak event times and also calculates last water leak duration. Each LWL01 is pre-load with a set of unique keys for LoRaWAN registration, register these keys to local LoRaWAN server and it will auto connect after power on. Features LoRaWAN v1.0.3 Class A SX1262 LoRa Core Water Leak detect CR2032 battery powered AT Commands to change parameters Uplink on periodically and water leak event Downlink to change configure Applications Wireless Alarm and Security Systems Home and Building Automation Industrial Monitoring and Control

    € 19,95

    Leden € 17,96

  • YDLIDAR X2 Lidar – 360-graden Laser Range Scanner (8 m)

    YDLIDAR YDLIDAR X2 Lidar 360-graden Laser Range Scanner (8 m)

    De YDLIDAR X2 Lidar is een 360-graden tweedimensionaal afstandsmeetproduct. Dit product is gebaseerd op het principe van triangulatie, en is uitgerust met relevante optica, elektriciteit, en algoritme-ontwerp om hoge-frequentie en hoge-precisie afstandsmeting te realiseren. Terwijl de afstand wordt gemeten, wordt 360 graden van scannen afstandsmeting bereikt door het continu verkrijgen van de hoek informatie door de 360 graden rotatie van de motor. Features Scanhoek: 360° Scanbereik radius: 8 m Bereikresolutie: 2% Scanfrequentie: 5-8 Hz Bemonsteringsfrequentie: 3000 Hz Max stroom: 500 mA Lasergolflengte: 775-795 nm Laservermogen: 3-5 mW Toepassingen Robotnavigatie en obstakelvermijding Robot ROS onderwijs en onderzoek Regionale veiligheid Milieuscan en 3D-reconstructie Huishoudelijke service robot/robot stofzuiger navigatie en obstakel vermijding De X2 maakt gebruik van een seriële poort (UART) op 3,3 V-niveau voor communicatie. Gebruikers kunnen het externe systeem en het product via de fysieke interface met elkaar verbinden en de in real-time gescande puntenwolkgegevens, apparaatinformatie en apparaatstatus verkrijgen volgens het communicatieprotocol van het systeem. De X2 heeft zijn eigen motor driver met motor snelheidsregeling functie. Het randapparaat kan de motor van de X2 aansturen door het stuursignaal in te voeren via de M_SCTP pin in de interface. M_SCTP is het motortoerental-regelsignaal, dat kan worden aangepast door spanning of PWM-golf. De X2 maakt gebruik van een infrarode puntgepulste laser die voldoet aan de FDA klasse I laserveiligheidsnormen. De laser en de optische lens completeren de transmissie en ontvangst van het lasersignaal om een hoge-frequentie ranging te bereiken.

    € 79,95

    Leden € 71,96

  • SparkFun GPS-RTK-SMA Breakout – ZED-F9P (Qwiic)

    SparkFun SparkFun GPS-RTK-SMA Breakout - ZED-F9P (Qwiic)

    Gebaseerd op de SparkFun GPS-RTK2 ontwerpen, verhoogt de SparkFun GPS-RTK-SMA de bar voor hoge precisie GPS en is het de nieuwste in een lijn van krachtige RTK kaarten met de ZED-F9P module van u-blox. De ZED-F9P is een top-of-the-line module voor hoge nauwkeurigheid GNSS en GPS locatie-oplossingen, met inbegrip van RTK in staat tot 10mm, drie-dimensionale nauwkeurigheid. Met deze kaart, zult u in staat zijn om te weten waar uw (of een object) X, Y, en Z locatie is binnen ruwweg de breedte van uw vingernagel! De ZED-F9P is uniek omdat hij zowel als rover als basis station kan werken. Door gebruik te maken van ons handige Qwiic systeem, hoeft u niet te solderen om hem aan te sluiten op de rest van uw systeem. We hebben echter nog steeds 0,1'-spaced pinnen als u liever een breadboard gebruikt. We hebben een oplaadbare backupbatterij toegevoegd om de laatste moduleconfiguratie en satellietgegevens tot twee weken lang beschikbaar te houden. Deze batterij helpt bij het 'warm starten' van de module, waardoor de tijd tot de eerste fix drastisch wordt verkort. Deze module beschikt over een survey-in modus waardoor de module een basisstation kan worden en RTCM 3.x correctiegegevens kan produceren. Op basis van uw feedback hebben we de u.FL connector vervangen door een SMA connector in deze versie van het bord. Het aantal configuratiemogelijkheden van de ZED-F9P is ongelooflijk! Geofencing, variabel I2C adres, variabele update rates, zelfs de hoge precisie RTK oplossing kan worden verhoogd tot 20Hz. De GPS-RTK2 heeft zelfs vijf communicatiepoorten die allemaal tegelijk actief zijn: USB-C (die als COM-poort wordt geteld), UART1 (met 3,3V TTL), UART2 voor RTCM-ontvangst (met 3,3V TTL), I2C (via de twee Qwiic-connectoren of uitgevallen pinnen), en SPI. SparkFun heeft ook een uitgebreide Arduino bibliotheek voor u-blox modules geschreven om de GPS-RTK-SMA eenvoudig uit te lezen en te besturen via ons Qwiic Connect System. Laat NMEA achter je! Gebruik een veel lichter gewicht binaire interface en geef je microcontroller (en zijn ene seriële poort) een pauze. De SparkFun Arduino bibliotheek laat zien hoe je breedtegraad, lengtegraad, zelfs koers en snelheid over I2C kunt lezen zonder de noodzaak van constante seriële polling. Features Gelijktijdige ontvangst van GPS, GLONASS, Galileo en BeiDou Ontvangt zowel L1C/A als L2C banden Spanning: 5 V of 3,3 V, maar alle logic is 3.3 V Stroom: 68 mA - 130 mA (varieert met constellaties en tracking status) Tijd voor de eerste reparatie: 25 s (koud), 2 s (heet) Max. navigatiesnelheid: PVT (basis locatie over UBX binair protocol) - 25 Hz RTK - 20 Hz Raw - 25 Hz Horizontal Position Accuracy: 2.5 m zonder RTK 0.010 m met RTK Maximale hoogte: 50 km Maximum snelheid: 500 m/s Gewicht: 6.8 g Afmetingen: 43.5 mm x 43.2 mm 2 x Qwiic Connectors

    € 379,00

    Leden € 341,10

  • GPS/GNSS Magnetic Mount Antenna – 3 m (SMA)

    SparkFun GPS/GNSS Magnetic Mount Antenna - 3 m (SMA)

    Nog 3 op voorraad

    Deze uitzonderlijke GPS/GNSS-antenne is ontworpen voor zowel GPS- als GLONASS-ontvangst. Door de magnetische bevestiging kan de antenne gemakkelijk worden bevestigd op een metalen ondergrond zoals een grondplaat of autodak. De antenne wordt afgesloten met een kabel van 3 m en een standaard SMA-connector.Features Afmetingen: 50x38x17mm Gewicht: 75g inclusief 3m kabel Frequentiebereik: 1575 - 1610MHz GPS middenfrequentie: 1575.42MHz GLONASS Center Frequentie: 1602MHz LNA spanning: 3 tot 5VDC LNA-versterking: 28dB LNA Stroom: 10mA Terminatie Aansluiting: SMA Impedantie: 50Ω Rechtse polarisatie Kabellengte: 3 meter

    Nog 3 op voorraad

    € 13,95

    Leden € 12,56

  • Dragino LSN50v2-D20 LoRaWAN Waterproof Outdoor Temperature Sensor (EU868)

    Dragino Dragino LSN50v2-D20 LoRaWAN Waterproof Outdoor Temperature Sensor (EU868)

    De temperatuursensor die in LSN50v2-D20 wordt gebruikt is DS18B20, die -55°C ~ 125°C kan meten met een nauwkeurigheid van ±0,5°C (max ±2,0 °C). De sensorkabel is gemaakt van silicagel, en de verbinding tussen de metalen sonde en de kabel is dubbel gecomprimeerd voor waterdicht, vochtbestendig en antiroest voor langdurig gebruik. De LSN50v2-D20 ondersteunt een temperatuuralarmfunctie, de gebruiker kan een temperatuuralarm instellen voor onmiddellijke waarschuwing. Hij wordt aangedreven door een 8500mAh Li-SOCI2 batterij en is ontworpen voor langdurig gebruik tot 10 jaar. Elke LSN50v2-D20 is vooraf geladen met een set unieke sleutels voor LoRaWAN-registratie, registreer deze sleutels bij de lokale LoRaWAN-server en het zal automatisch verbinding maken na het inschakelen. Functies LoRaWAN v1.0.3 Klasse A Ultra-laag stroomverbruik Externe DS18B20 sonde (standaard 2 meter) Metingsbereik -55°C ~ 125°C Temperatuuralarm AT Commando's om parameters te wijzigen Uplink op periodiek of onderbreken Downlink om te configureren wijzigen Toepassingen Draadloze Alarm- en Beveiligingssystemen Huis- en gebouwautomatisering Geautomatiseerde meteruitlezing Industriële bewaking en regeling Lange-afstands irrigatiesystemen

    € 64,95

    Leden € 58,46

  • Bijna uitverkocht SparkFun GPS Breakout – NEO-M9N, Chip Antenna (Qwiic)

    SparkFun SparkFun GPS Breakout - NEO-M9N, Chip Antenna (Qwiic)

    Nog 2 op voorraad

    Dankzij de on-board oplaadbare batterij, heb u back-up stroom waardoor de GPS binnen enkele seconden een hot lock kan krijgen! Bovendien ondersteunt deze u-blox ontvanger I²C (u-blox noemt dit Display Data Channel), waardoor het perfect is voor de Qwiic compatibiliteit, zodat we onze kostbare UART-poorten niet hoeven te gebruiken. Door gebruik te maken van ons handige Qwiic systeem, hoeft u niet te solderen om hem aan te sluiten op de rest van uw systeem. We hebben echter nog steeds 0.1'-spaced pinnen uitgesplitst als u liever een breadboard gebruikt.De NEO-M9N module detecteert storingen en spoofing gebeurtenissen en kan deze melden aan de host, zodat het systeem kan reageren op dergelijke gebeurtenissen. Een SAW (Surface Acoustic Wave) filter gecombineerd met een LNA (Low Noise Amplifier) in het RF pad is geïntegreerd in de NEO-M9N module, wat een normale werking toelaat zelfs onder sterke RF interferenties.U-blox gebaseerde GPS producten zijn configureerbaar door gebruik te maken van het populaire maar dichte, windows programma genaamd u-centre. Tal van verschillende functies kunnen worden geconfigureerd op de NEO-M9N: baud rates, update rates, geofencing, spoofing detectie, externe interrupts, SBAS/D-GPS, etc. Dit alles kan gedaan worden binnen de SparkFun Arduino bibliotheek!De SparkFun NEO-M9N GPS Breakout is ook uitgerust met een on-board oplaadbare batterij die stroom levert aan de RTC op de NEO-M9N. Dit verkort de time-to-first fix van een koude start (~24s) naar een warme start (~2s). De batterij zal de RTC en GNSS baangegevens onderhouden zonder dat deze gedurende lange tijd op de stroom zijn aangesloten.Features Integrated Chip Antenna 92-Channel GNSS Ontvanger 1.5m Horizontale Nauwkeurigheid 25Hz Max Update Rate (4 concurrent GNSS) Time-To-First-Fix: Cold: 24 s Hot: 2 s Max Hoogte: 80,000 m Max G: ≤4 Max Snelheid: 500 m/s Snelheidsnauwkeurigheid: 0.05 m/s Koers nauwkeurigheid: 0.3 degrees Tijd Impuls Nauwkeurigheid: 30 ns 3.3 V VCC and I/OHuidige consumptie: ~31 mA Tracking GPS+GLONASS Software Configureerbaar Geofencing Odometer Spoofing Detection External Interrupt Pin Control Low Power Mode Many others! Ondersteunt NMEA, UBX, and RTCM protocollen over UART or I²C interfaces

    Nog 2 op voorraad

    € 69,95

    Leden € 62,96

  • JOY-iT Sensor Kit X40

    JOY-iT JOY-iT Sensor Kit X40

    Deze hoogwaardige sensorkit is speciaal ontwikkeld voor de meest voorkomende open-source platformen. Het is compatibel met single-board computers (Raspberry Pi, Banana Pi, CubieBoard, CubieTruck, Beaglebone, pcDuino) en microcontrollers (Arduino, ATmega, AVR, PIC, STM32, enz.). Het bevat in totaal 40 verschillende sensoren. Je kunt de sensoren solderen of op een bordje plakken om aan verschillende schakelingen of experimenten te werken. Uitgebreide sensorset met 40 sensoren inclusief analoge- en spanningsomvormer Betrouwbare sensoren van hoge kwaliteit Universeel toepasbaar Inhoud van de set KY-001 Temperatuursensormodule KY-002 Module trillingsschakelaar KY-003 Hall-magnetisch veld sensormodule KY-004 Knopmodule KY-005 Infrarood zender module KY-006 Passieve Piezo zoemermodule KY-009 RGB LED SMD module KY-010 Lichte barrièremodule KY-011 2-kleuren (Rood+Groen) 5 mm LED module KY-012 Actieve Piezo zoemermodule KY-013 de module van de temperatuursensor KY-015 combisensor temperatuur+vochtigheid KY-016 RGB 5 mm LED module KY-017 De module van de schuine standschakelaar KY-018 Fotoresistormodule KY-019 5 V relais module KY-020 Kantelschakelaar module KY-021 Mini magnetische reed module KY-022 Infrarood ontvanger module KY-023 Joystick module (XY-as) KY-024 Lineaire magnetische hallsensor KY-025 Rietmodule KY-026 Vlammen sensor module KY-027 Magisch licht cup module KY-028 Temperatuursensor module (Thermistor) KY-029 2-kleuren (Rood+Groen) 3 mm LED module KY-031 Klopsensormodule KY-032 Obstakeldetectie module KY-033 Volgsensor module KY-034 7-kleuren LED flitser module KY-035 Bihor magnetische sensormodule KY-036 Metalen-aanraaksensormodule KY-037 Microfoonsensormodule (hoge gevoeligheid) KY-038 Microfoon geluidssensormodule KY-039 Hartslagsensormodule KY-040 Roterende encoder KY-050 Ultrasone afstandssensor KY-051 Spanningsomzetter/niveauregelaar KY-052 Druksensor / Temperatuursensor (BMP180) KY-053 Analoog-digitaal omzetter Een gedetailleerde lijst met een korte beschrijving van de functies, programmeervoorbeelden en software kunt u vinden op http://sensorkit.en.joy-it.net.

    € 59,95

    Leden € 53,96

  • MonkMakes Plant Monitor

    MonkMakes MonkMakes Plant Monitor

    Monitor soil moisture, temperature and relative humidity measurement with the Plant Monitor. This board is compatible with the BBC micro:bit, Raspberry Pi and most microcontroller boards. Alligator / croc clip rings Ready soldered header pins for your choice of microcontroller. Easy to use UART serial interface Additional analog output for moisture only Built-in RGB LED Downloads Datasheet Instructions

    € 14,95

    Leden € 13,46

  • Waveshare 10-DOF IMU Sensor Module for Raspberry Pi Pico

    Waveshare Waveshare 10-DOF IMU Sensor Module for Raspberry Pi Pico

    The Pico-10DOF-IMU is an IMU sensor expansion module specialized for Raspberry Pi Pico. It incorporates sensors including gyroscope, accelerometer, magnetometer, baroceptor, and uses I²C bus for communication. Combined with the Raspberry Pi Pico, it can be used to collect environment sensing data like temperature and barometric pressure, or to easily DIY a robot that detects motion gesture and orientation. Features Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series Onboard ICM20948 (3-axis gyroscope, 3-axis accelerometer, and 3-axis magnetometer) for detecting motion gesture, orientation, and magnetic field Onboard LPS22HB barometric pressure sensor, for sensing the atmospheric pressure of the environment Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specifications Operating voltage 5 V Accelerometer Resolution: 16-bitMeasuring range (configurable): ±2, ±4, ±8, ±16gOperating current: 68.9uA Gyroscope Resolution: 16-bitMeasuring range (configurable): ±250, ±500, ±1000, ±2000°/secOperating current: 1.23mA Magnetometer Resolution: 16-bitMeasuring range: ±4900µTOperating current: 90uA Baroceptor Measuring range: 260 ~ 1260hPaMeasuring accuracy (ordinary temperature): ±0.025hPaMeasuring speed: 1Hz - 75Hz

    € 19,95

    Leden € 17,96

Login

Wachtwoord vergeten?

Heb je nog geen account?
Maak account aan