Zoekresultaten voor "wiznet"
WIZnet WIZnet W5100S-EVB-Pico RP2040-based Evaluation Board
Features RP2040 microcontroller with 2 MB Flash Dual-core cortex M0+ at up to 133 MHz 264 KB multi-bank high performance SRAM External Quad-SPI Flash with eXecute In Place (XIP) High performance full-crossbar bus fabric 30 multi-function General Purpose IO (4 can be used for ADC) 1.8-3.3 V IO Voltage (NOTE. Pico IO voltage is fixed at 3.3 V) 12-bit 500 ksps Analogue to Digital Converter (ADC) Various digital peripherals 2× UART, 2× I²C, 2× SPI, 16× PWM channels 1× Timer with 4 alarms, 1× Real Time Counter 2× Programmable IO (PIO) blocks, 8 state machines total Flexible, user-programmable high-speed IO Can emulate interfaces such as SD Card and VGA Includes W5100S Supports Hardwired Internet Protocols: TCP, UDP, WOL over UDP, ICMP, IGMPv1/v2, IPv4, ARP, PPPoE Supports 4 Independent Hardware SOCKETs simultaneously Internal 16 KB Memory for TX/ RX Buffers SPI Interface Micro-USB B port for power and data (and for reprogramming the Flash) 40 pin 21x51 'DIP' style 1mm thick PCB with 0.1' through-hole pins also with edge castellations 3-pin ARM Serial Wire Debug (SWD) port 10 / 100 Ethernet PHY embedded Supports Auto Negotiation Full / Half Duplex 10 / 100 Based Built-in RJ45 (RB1-125BAG1A) Built-in LDO (LM8805SF5-33V) Downloads RP2040 Datasheet W5100S Datasheet Schematic & Part list & Gerber File C/C++ Examples CircuitPython Examples
€ 14,95
Leden € 13,46
WIZnet WIZnet WizFi360-EVB-Pico
Raspberry Pi Pico EVB combined with the WizFi360-PAWizFi360-EVB-Pico is based on Raspberry Pi RP2040 and adds Wi-Fi connectivity using WizFi360. It is pin-compatible with Raspberry Pi Pico board and can be used for IoT Solution development.Specifications RP2040 microcontroller with 2 MByte Flash Dual-core cortex M0+ at up to 133 MHz 264 kByte multi-bank high performance SRAM External Quad-SPI Flash with eXecute In Place (XIP) Includes WizFi360-PA Supports Hardwired Internet Protocols: TCP, UDP, WOL over UDP, ICMP, IGMPv1/v2, IPv4, ARP, PPPoE WiFi 2.4G, 802.11 b/g/n Support Station / SoftAP / SoftAP+Station operation modes Support “Data pass-through” and “AT command data transfer” mode Support serial AT command configuration Support TCP Server / TCP Client / UDP operating mode Support configuration of operating channel 0 ~ 13 Support auto 20 MHz / 40 MHz bandwidth Support WPA_PSK / WPA2_PSK encryption Support built-in unique MAC address and user configurable Industrial grade (operating temperature range: -40°C ~ 85°C) CE, FCC certification Includes 16 Mbit Flash Memory Micro-USB B port for power and data (and for reprogramming the Flash) 40 pin 21×51 ‘DIP’ style 1mm thick PCB with 0.1' through-hole pins also with edge castellations 3-pin ARM Serial Wire Debug (SWD) port Built-in LDO DownloadsDocumentation
€ 12,95
Leden € 11,66
WIZnet WIZnet W6100-EVB-Pico
W6100-EVB-Pico is een microcontroller evaluatiebord op basis van de Raspberry Pi RP2040 en een volledig geïntegreerde W6100 TCP/IP-controller, en werkt in principe hetzelfde als een Raspberry Pi Pico bord, maar met extra Ethernet via de W6100. Kenmerken RP2040 microcontroller met 2 MByte Flash Dual-core cortex M0+ tot 133 MHz 264 kByte multi-bank high performance SRAM Externe Quad-SPI Flash met eXecute In Place (XIP) High performance full-crossbar bus fabric 30 multifunctionele General Purpose I/O-poorten (4 daarvan te gebruiken voor ADC) 1,8 - 3,3 V I/O-spanning (note: de Pico I/O-spanning is vastgesteld op 3,3 V ) 12-bits 500 ksps Analoog naar Digitaal Converter (ADC) Diverse digitale randapparatuur: 2x UART, 2x I²C, 2x SPI, 16x PWM kanalen 1x Timer met 4 alarmen, 1x Real Time Counter 2x Programmable IO (PIO) blokken, 8 state machines totaal Flexibele, door de gebruiker te programmeren high-speed I/O Kan interfaces zoals een SD-kaart en VGA emuleren Ingebouwde W6100 Ondersteunt internetprotocollen: TCP, UDP, IPv6, IPv4, ICMPv6, ICMPv4, IGMP, MLDv1, ARP, PPPoE Ondersteunt gelijktijdig 8 onafhankelijke SOCKETs met 32 KB geheugen Intern geheugen van 16 Kbytes voor TX/RX buffers SPI interface Micro-USB B aansluiting voor voeding en data (en voor het herprogrammeren van de Flash) 40-pins 21x51 'DIP' stijl 1 mm dikke PCB met 0,1' through-hole pinnen met castellatie 3-pins ARM Serial Wire Debug (SWD) poort 10/100 Ethernet PHY embedded Ondersteunt Auto Negotiation Full / Half Duplex 10 / 100 gebaseerd Ingebouwde RJ45 (RB1-125BAG1A) Ingebouwde LDO (LM8805SF5-33V) Downloads Documenten Getting started on GitHub Firmware
€ 21,95
Leden € 19,76
Arduino Arduino Ethernet Shield 2
Zoals altijd bij Arduino is elk element van het platform - hardware, software, en documentatie - vrij beschikbaar en open-source. Dit betekent dat je precies kunt leren hoe het is gemaakt en het ontwerp kunt gebruiken als uitgangspunt voor je eigen circuits. Honderdduizenden Arduino Boards zijn al het voeden van de creativiteit van mensen over de hele wereld, elke dag. Het Arduino Ethernet Shield 2 maakt het mogelijk een Arduino Board aan te sluiten op het internet. Het is gebaseerd op de Wiznet W5500 Ethernet chip. De Wiznet W5500 biedt een netwerk (IP) stack geschikt voor zowel TCP en UDP. Hij ondersteunt tot acht gelijktijdige socket-verbindingen. Gebruik de Ethernet-bibliotheek om sketches te schrijven die met de Shield verbinding maken met internet. Het Ethernet Shield 2 wordt aangesloten op een Arduino Board met behulp van lange wire-wrap headers die door het Shield lopen. Hierdoor blijft de pin-layout intact en kan een ander Shield er bovenop worden gestapeld. De meest recente revisie van het bord laat de 1.0 pin-out op rev 3 van het Arduino UNO bord zien. Het Ethernet Shield 2 heeft een standaard RJ-45 aansluiting, met een geïntegreerde lijntransformator en Power over Ethernet ingeschakeld. Er is een micro-SD-kaartslot aan boord, dat kan worden gebruikt om bestanden op te slaan voor gebruik via het netwerk. Het is compatibel met de Arduino Uno en Mega (met behulp van de Ethernet-bibliotheek). De on-board micro-SD kaartlezer is toegankelijk via de SD bibliotheek. Wanneer met deze bibliotheek wordt gewerkt, bevindt SS zich op pen 4. De oorspronkelijke revisie van het Shield bevatte een full-size SD-kaartsleuf; deze wordt niet ondersteund. Het Shield bevat ook een reset-controller, om ervoor te zorgen dat de W5500 Ethernet module goed wordt gereset bij het opstarten. Eerdere revisies van het Shield waren niet compatibel met de Mega en moesten handmatig worden gereset na het opstarten.
€ 34,95
Leden € 31,46
WIZnet WIZnet Ethernet HAT for Raspberry Pi Pico
Features Includes W5100S Supports Hardwired Internet Protocols: TCP, UDP, WOL over UDP, ICMP, IGMPv1/v2, IPv4, ARP, PPPoE Supports 4 Independent Hardware SOCKETs simultaneously Internal 16 Kbytes Memory for TX/ RX Buffers Operation Voltage 3.3 V / 5 V Built-in LDO (LM8805SF5-33V) SPI Interface 5 V I/O tolerance 10 / 100 Ethernet PHY embedded Supports Auto Negotiation Full / Half Duplex 10 / 100 Based Built-in RJ45 (RB1-125BAG1A) Downloads W5100S Datasheet v1.2.5 Schematic & Part list & Gerber File C/C++ Examples CircuitPython Examples