Zoekresultaten voor "sol"
Makerfabs Makerfabs LoRa Soil Monitoring & Irrigation Kit (EU868)
This kit is based on ESP32 and LoRa. The ESP32 3.5' display is the console for the system, it receives the LoRa message from LoRa moisture sensors (support up to 8 sensors in the default firmware) , and send control commands to LoRa 4-channel MOSFET (2 4-channel MOSFET supported, with totally 8 channels), to control the connected valves open/close, and thus to control the irrigation for multiple points. Features Ready to use: Firmware are pre-programmed for all the modules before shipping, the user can only power them up and set the ID to the console, and start to use. Suitable for none-programmers, in 3 minutes to create filed application. With Lora wireless connection: The monitor & control range can be up to few kilometer, suitable for garden/small farm. Soil moisture sensor with good corrosion resistance, can be used at least half an year with 2 AAA battery. Easy to install: Compares to cheap solution with wires, which is hard to implement in files application, there the connection wires do not needed, the whole installation clean and easy; The valves can be connected Lora MOSFET easily. Hardware & Software Open: To study Lora & FreeRTOS. The ESP32 display console/Lora Soil Moisture Sensor/LoRa MOSFE are all programmed with Arduino. For programmers/engineers, can development further more specialized application. Based on ESP32, with WiFi connection, the console can also access to internet, the create much more applications including the moisture data updating to internet for remote monitor, and remote control with MQTT. Included 1x ESP32 3.5' Display (without camera) 1x Lora Expansion for ESP32 Display 2x Lora Moisture Sensor 1x Lora 4-channel MOSFET 1x 12 V Power Supply Water Pipe (5 m) 1x 1-input & 4-output Pipe Joint Downloads Instructable: Soil Monitoring & Irrigation with LoRa GitHub
€ 149,95
Leden € 134,96
Soldered Soldered Inkplate 6COLOR (with E-paper)
Inkplate 6COLOR continues the tradition of the well-known, user-friendly Inkplate series which is compatible with Arduino and Micropython. Inkplate 6COLOR offers a unique innovation – the ability to display colors on the screen. Inkplate 6COLOR has a 5.85" folded e-paper that displays a total of 7 different colors (Black, White, Red, Yellow, Blue, Green, and Orange). Considering the built-in dithering capability, the results you can get on the screen are really impressive. Powered by ESP32, you will have strong microcontroller with WiFi and Bluetooth on your disposal. It’s super-low-power (18 uA) so you can use it for days, weeks, or months out of a single battery charge. Using our Arduino library (100% compatible with Adafruit GFX), it’s 5 minute work to get the board running for you. The Micropython module is available as well. It’s 100% open-source for both software and hardware. What is especially interesting is that Inkplate uses recycled screens taken from old e-book readers, which is very environmentally friendly, but you have to keep in mind that some screens may have small scratches because of this. All screens with large scratches and damages are not used at all. Features 5.85-inch, 600x448 pixel electronic paper with the ability to display 7 different colors Powered by an ESP32 microcontroller with built-in WiFi and Bluetooth 4.0 (BLE) Consumes extremely small amount of power, whether powered by a lithium battery or USB, in deep sleep mode it consumes only 18 µA, so it will run on one battery for years, and there is also a battery charger located on the board! MicroSD card reader from which Inkplate 6COLOR can extract images to display on its display Additional GPIO lines available, easyC/Qwiic compatibility and I²C and SPI support Arduino library ready (100% compatible with Adafruit GFX) and micropython that enable display of text, images and geometric shapes Dimensions: 131.5 x 105.5 x 10 mm Downloads Arduino library Inkplate documentation Getting started with Inkplate
€ 114,95
Leden € 103,46
Pi Supply Solar Panel 6 W for PiJuice
Features Portability - a 6 W panel that folds down into a super compact size. Easy to pack up and go Easily mountable - metal eye-holes in each corner (4 total) allow easy attachment to backpacks, trees, or tents Water resistant up to IPX4 rating One Regulated 5v/1A USB output - it works with your PiJuice, smartphones, tablets, audio players and more! Features SunPower solar panels which provide an industry-leading solar conversion efficiency Specification Solar panel - 5.5 V / 6 W Regulated Max output - 5 V / 5 W Single USB max output - 5 W Built-in smart-power chip Folded dimensions - 16.3 cm x 15.6 cm x 2.5 cm Unfolded dimensions - 32.8 cm x 15.6 cm x 2.4 cm Weight - 320 g CE and FCC tested Includes PiJuice Solar Panel - 6 W USB to microUSB Cable User Manual
€ 49,95
Leden € 44,96
Uni-Trend UNI-T UT196 Solar Multimeter
De UT196 True RMS Solar digitale multimeter is een ideaal hulpmiddel bij het onderhoud van zonne-energie systemen. Deze robuuste meter is ontworpen voor technici die in weer en wind buiten werken. De UT196 kan spanning meten tot 1700 V DC en 1500 V AC, en stroom tot 3000 A AC met behulp van een externe stroomtangsensor. Deze solar meter is waterdicht conform IP65, en is ook bestand tegen een val van 2 m.De UT196 Solar digitale multimeter is ontworpen met beveiligingen tegen overbelasting van 1700 V DC en 1500 Vrms AC, en getest voor veilig gebruik in CAT III 1000 V en CAT IV 600 V omgevingen.Kenmerken True RMS Meet tot 1700 V DC en 1500 V AC bij hoogspanningstoepassingen zoals zonnepanelen en wind Bescherming conform IP65 CAT III 1000V, CAT IV 600 V Analoge staafgrafiek Frequentiebereik: 45 Hz~1 kHz Laagdoorlaatfilter functie Modus voor lage impedantie Ingebouwde zaklamp, heldere achtergrondverlichting, en visueel alarm Toepassingen Meten van hoge DC-spanningen Uitgangsspanning- en frequentiemeting Spannings- en frequentiemeting Stroom- en frequentiemeting Specificaties Bereik UT196 DC-spanning (V) 1700 V ±0,2% +5 AC-spanning (V) 1500 V ±0,8% +3 Frequentie (Hz) 1 MHz ±0,08% +4 Weerstand (Ω) 60 MΩ ±0,8% +2 Capaciteit (F) 60 mF ±1,9% +5 Voeding 9 V batterij Afmetingen 195 x 95 x 58 mm Inbegrepen UT196 Solar digitale multimeter Batterij Meetsnoeren Downloads Datasheet Gebruikershandleiding
€ 134,95
Leden € 121,46
Kuongshun Solderless Breadboard - 1660 Tie Point (ZY-204)
Features 2 Terminal Strips 1260 Tie-points 4 Distribution Strips 400 Tie-points 3 Binding Posts Black aluminum plate Size: 21.5 x 13 cm Colored coordinates for easy component placement
€ 19,95
Leden € 17,96
SparkFun Hook-Up Wire - Assortment (Solid Core, 22 AWG)
Een assortiment gekleurde draden. Je weet dat het een mooi ding is. Zes verschillende kleuren staaldraad in een kartonnen dispenserdoos. Zet dit op je werkbank, en maak je geen zorgen meer over het hebben van een stuk draad in de buurt! Included 22 AWG 25 ft / Spool 6 Spools in zes verschillende kleuren De kleuren zijn rood, blauw, geel, groen, zwart en wit. Dispenser Box
€ 31,95
Leden € 28,76
Waveshare Waveshare Solar Power Management Module
Deze zonne-energie management module is ontworpen voor een 6 ~ 24 V zonnepaneel. Hij kan de 3,7 V oplaadbare Li-accu opladen via een zonnepaneel of USB-aansluiting, en biedt een gestabiliseerde uitgangspanning van 5 V / 1 A of 3,3 V / 1 A.De module beschikt over een MPPT (Maximum Power Point Tracking) functie en meerdere beveiligingscircuits, en werkt daarom veilig en met hoge efficiëntie en stabiliteit. Hij is geschikt voor IoT op zonne-energie, toepassingen op laag vermogen en andere energiezuinige projecten.Kenmerken Ondersteunt MPPT (Maximum Power Point Tracking), waardoor de efficiëntie van het zonnepaneel wordt gemaximaliseerd Ondersteunt het opladen van accu’s via zonnepaneel / USB-aansluiting Geschikt voor 6 ~ 24 V zonnepaneel, met DC-002 jack ingang of schroefaansluiting Een ingebouwde MPPT SET-schakelaar, waarmee u het niveau selecteert wat het dichtst bij het ingangsniveau ligt om de laadefficiëntie te verbeteren Twee voedingsuitgangen: een USB-poort voor 5 V, en een pinheader voor 3,3 V of 5 V Een ingebouwde aluminium elektrolytische condensator met hoge capaciteit en een SMD keramische condensator, waardoor de rimpelspanning wordt verminderd, en voor stabiele werking Een 14500 accuhouder en een PH2.0 accuconnector, voor het aansluiten van meerdere soorten 3,7 V oplaadbare Li-accu’s Verschillende led-indicatoren, voor het monitoren van het zonnepaneel en de accu Meerdere beveiligingscircuits: over-laden / over-ontladen / bescherming tegen omgekeerd aansluiten / oververhitting / teveel stroom, voor stabiele werking en veilig gebruik Specificaties Zonnecel ingang 6 ~ 24 V (default 6 V) Opladen USB Accu 3,7 V 850 mAh 14500 Li-ion accu (NIET inbegrepen) USB-ingang 5 V (Micro USB) 5 V uitgang 5 V / 1 A (USB OUT, pin header) 3,3 V / 1 A (pin header) Cutoff spanning bij opladen 4,2 V ±1% Over-ontladen beschermingsspanning 2,9 V ±1% Zonnepaneel oplaad efficiency ~78% USB oplaad efficiency ~82% Accu boost output efficiency ~86% Ruststroom (max) <2 mA Bedrijfstemperatuur -40°C ~ 85°C Afmetingen 65,2 x 56,2 x 22,9 mm Opmerking: 14500 accu is NIET inbegrepen.DownloadsWiki
€ 14,95
Leden € 13,46
Elektor Labs AE970D Soldeerstation (80 W) incl. extra soldeerstift
Soldeerstation voor precisiesolderen met actief verwarmde soldeerstift Het AE970D soldeerstation is een krachtig 80 W apparaat om te kunnen solderen met een snelle opwarming. Het brede temperatuurbereik van 150-550°C zorgt ervoor dat hij aan al uw soldeerwensen kan voldoen. Dankzij de krachtige plug-and-play geïntegreerde actieve soldeerstift kan de AE970D binnen 9 seconden het smeltpunt bereiken. Gepatenteerde close-loop automatische en constante temperatuurregeling zorgt ervoor dat er gesoldeerd kan worden met veel stabiliteit, uitstekende prestaties en een hoge nauwkeurigheid. Kenmerken Een vermogen van 80 W voor een snelle opwarming. Breed temperatuurbereik van 150-550°C (302-1022°F) om aan al uw soldeerwensen te kunnen voldoen. Hoogwaardige plug-and-play geïntegreerde actieve soldeerstift, kan het smeltpunt binnen 9 seconden bereiken. Gepatenteerde close-loop automatische en constante temperatuurregeling, wat veel stabiliteit, uitstekende prestaties en een hoge nauwkeurigheid garandeert. Specificaties Vermogen 80 W Voedingsspanning 110 VAC / 230 VAC Uitgangsspanning 25 VAC Temperatuurbereik 150-550°C (302-1022°F) Verwarmingselement Geïntegreerde actieve verwarming uit de T80-serie Temperatuurstabiliteit ±1°C/±1.8°F (bij temperatuur > 200°C/400°F) Weerstand van stift naar aarde < 2 Ω Spanning van stift naar aarde < 2 mV Lengte netsnoer 1 m Kabellengte naar soldeerbout 1,2 m Afmetingen 148 x 120 x 85 mm Gewicht (basis unit) 1,33 kg Inbegrepen Basis unit Soldeerbout incl. soldeerstift T80-D24 IJzeren standaard Messing wolbedje Handleiding Extra: gratis soldeerstift T80-BC3
€ 109,95€ 94,95
Leden identiek
FNIRSI FNIRSI HS-01 Slimme Soldeerbout (incl. 6 soldeertips)
Het perfecte gereedschap voor de snelle reparatiesDe HS-01 is een krachtige, verstelbare slimme soldeerbout met een ingebouwd 0,87' OLED-display, die snel temperaturen tussen 80-420°C kan bereiken. Het display toont alle belangrijke informatie, waaronder de hoogte van de temperatuur, de ingestelde temperatuur, de voedingsspanning en het gebruikte vermogen. U kunt de werkspanning direct in het menu naar wens instellen tussen 9-20 V. De geïntegreerde sleeptimer schakelt de bout automatisch na 30 minuten uit.Kenmerken 96 W ingang (DC) 65 W PD vermogen OLED-display Constante temperatuur & snelle opwarming CNC-metaal integraal gegoten Slimme beveiliging tegen verbranding Mini zakformaat Ergonomisch ontwerp Aluminium materiaal Links/rechts schakelaar Efficiënte warmte afgifte inductieve slaap mode Kleur: zwart Specificaties Verbruik 65 W Scherm 0,87 inch OLED Werkspanning 9 - 20 V DC Voeding USB-C Temperatuurbereik 80 – 420 °C (180 – 780 °F) Snellaad protocol PD trigger Afmetingen 184 x 20 x 20 mm (7,24 x 0,79 x 0,79 inch) Gewicht 56 g Vermogensselectie Werkspanning 20 V 15 V 12 V 9 V Bedrijfsstroom ≥ 3,25 A ≥ 2,5 A ≥ 2 A ≥ 1,5 A Vermogen 65 W 37,5 W 24 W 13,5 W Tin smelttijd 8 s 12 s 17 s 30 s Inbegrepen 1x FNRISI HS-01 slimme soldeerbout 6x Soldeerbout tips (HS01-BC2, HS01-KR, HS01-K65, HS01-B2, HS01-ILS, HS01-BC3) 1x DC naar USB-C voedingskabel 1x Standaard voor mini soldeerbout 1x Handleiding Vereist Voedingsadapter USB-C kabel DownloadsGebruikershandleiding
€ 74,95
Leden € 67,46
FNIRSI FNIRSI Soldeerboutstandaard
Deze multifunctionele metalen soldeerboutstandaard (met verstelbare hoek) is het perfecte hulpmiddel om te gebruiken in combinatie met de FNIRSI HS-01 soldeerbout.
€ 19,95€ 14,95
Leden identiek
Seeed Studio Seeed Studio Solar Panel for Outdoor Environments (3 W)
This solar panel is made of single-crystal material that transforms solar energy at an efficiency rate of 17%. Its resin surface and sturdy back make it suitable for outdoor environments. A 2 mm JST connector is attached to the penal, which makes it perfect for teaming up with most boards that support the use of solar power supply. The typical open circuit voltage is around 5 V, depending on light intensity. In bright summer days with a clear sky, the peak open-circuit voltage can rush up to 10 V. To prevent any damage to a connected board that accepts a narrow range of input voltage; you should check whether the open-circuit voltage is safe before any connection. Features Dimensions: 160 x 138 x 2.5 mm Typical voltage: 5.5 V Typical current: 540 mA Open-circuit voltage: 8.2 V Maximum load voltage: 6.4 V
€ 19,95
Leden € 17,96