Zoekresultaten voor "raspberry-pi-foundation"
Raspberry Pi Foundation Raspberry Pi 400 – Raspberry Pi 4-based PC (DE)
Raspberry Pi 400 ? Raspberry Pi 4-based PC (DE)
€ 89,95
Leden identiek
Raspberry Pi Foundation Official US Power Supply for Raspberry Pi 4 (black)
The Raspberry Pi USB-C power supply is designed specifically to power the latest Raspberry Pi 4 Model B computers. The power supply features a USB-C cable and is available in four different models to suit different international power sockets, and in two colors. Specifications Output Output voltage +5.1 V DC Minimum load current 0 A Nominal load current 3.0 A Maximum power 15.3 W Load regulation ±5 % Line regulation ±2 % Ripple & noise 120 mVp-p Rise time 100 ms maximum to regulation limits for DC outputs Turn-on delay 3000 ms maximum at nominal input AC voltage and full load Protection Short circuit protectionOvercurrent protectionOver temperature protection Efficiency 81% minimum (output current from 100%, 75%, 50%, 25%)72% minimum at 10% load Output cable 1.5 m 18AWG Output connector USB Type-C Input Voltage range 100 - 240 Vac (rated)96 - 264 Vac (operating) Frequency 50 / 60 Hz ± 3 Hz Current 0.5 A maximum Power consumption (no load) 0.075 W maximum Inrush current No damage shall occur, and the input fuse shall not blow Operating ambient temperature 0 - 40 °C
€ 9,95
Leden identiek
Raspberry Pi Foundation Le guide officiel du débutant Raspberry Pi (4e édition)
Raspberry Pi est un petit ordinateur intelligent de fabrication britannique dont le potentiel est illimité. Réalisé à partir de la même technologie que celle utilisée pour les smartphones, Raspberry Pi est conçu pour vous aider à apprendre le codage, à découvrir le fonctionnement des ordinateurs et à réaliser vos propres créations incroyables. Le but de ce livre est de vous montrer à quel point il est facile de se lancer. Il vous expliquera comment : Configurer votre Raspberry Pi, installer son système d?exploitation et commencer à utiliser cet ordinateur parfaitement fonctionnel. Lancer des projets de codage, en suivant des instructions détaillées et utilisant les langages de programmation Scratch 3 et Python. Expérimenter la connexion de composants électroniques et s?amuser en créant des projets étonnants.
€ 12,95
Leden € 11,66
Raspberry Pi Foundation Officiële behuizing voor Raspberry Pi 5 (zwart/grijs)
The Raspberry Pi 5 case is a refinement of the Raspberry Pi 4 case with improved thermal features to support the higher peak power consumption of the Raspberry Pi 5. It integrates a variable speed fan that is powered and controlled via a dedicated connector on the Raspberry Pi 5.
€ 11,95
Leden identiek
Raspberry Pi Foundation FPC Display Cable for Raspberry Pi 5 (300 mm)
Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use the same 22-way, 0.5 mm-pitch “mini” FPC format as the Compute Module Development Kit, and require adapter cables to connect to the 15-way, 1 mm-pitch “standard” format connectors on current Raspbery Pi camera and display products.These mini-to-standard adapter cables for cameras and displays (note that a camera cable should not be used with a display, and vice versa) are available in 200 mm, 300 mm and 500 mm lengths.
€ 2,95
Leden identiek
Raspberry Pi Foundation FPC Camera Cable for Raspberry Pi 5 (500 mm)
Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use the same 22-way, 0.5 mm-pitch “mini” FPC format as the Compute Module Development Kit, and require adapter cables to connect to the 15-way, 1 mm-pitch “standard” format connectors on current Raspbery Pi camera and display products.These mini-to-standard adapter cables for cameras and displays (note that a camera cable should not be used with a display, and vice versa) are available in 200 mm, 300 mm and 500 mm lengths.
€ 3,95
Leden identiek
Raspberry Pi Foundation Raspberry Pi Debug Probe
The Raspberry Pi Debug Probe is an all-in-one USB-to-debug kit that provides all the necessary hardware and cables for easy, solderless, plug-and-play debugging. It features both a processor serial debug interface (by default the ARM Serial Wire Debug interface, but other interfaces can be supported) and an industry-standard UART interface. Both interfaces use the Raspberry Pi 3-pin debug connector. It is designed to make it easy to debug and program Raspberry Pi Pico and RP2040 with a range of host platforms including Windows, Mac, and typical Linux computers. While designed for use with Raspberry Pi products, the Debug Probe provides standard UART and CMSIS-DAP interfaces over USB, so it can also be used with other processors, or even just as a USB-to-UART cable. It works with OpenOCD and other tools that support CMSIS-DAP. The Debug Probe is based on Raspberry Pi Pico hardware and runs the open source Raspberry Pi Picoprobe software. The firmware is updated in the same way as Raspberry Pi Pico firmware, so it is easy to keep the unit up to date with the latest firmware, or to use custom firmware. Features USB to ARM Serial Wire Debug (SWD) port USB to UART bridge Compatible with the CMSIS-DAP standard Works with OpenOCD and other tools supporting CMSIS-DAP Open source, easily upgradeable firmware Specifications Dimensions: 22 x 32 mm Nominal I/O voltage: 3.3 V Operating temperature: -20°C to +70°C Included 1x Raspberry Pi Debug Probe 1x Plastic case 1x USB cable 3x Debug cables 3-pin JST connector to 3-pin JST connector cable 3-pin JST connector to 0.1-inch header (female) 3-pin JST connector to 0.1-inch header (male) Downloads Datasheet 3-pin Debug Connector Schematics Diagram
€ 14,95
Leden identiek
Raspberry Pi Foundation Raspberry Pi High Quality Camera Module (M12 Mount)
De Raspberry Pi High Quality Camera is een betaalbare hoogwaardige camera van Raspberry Pi. Hij heeft een resolutie van 12 megapixels en een 7,9 mm diagonale sensor voor indrukwekkende prestaties bij weinig licht. De M12 Mount variant is ontworpen om te werken met de meeste van de verwisselbare M12 lenzen, terwijl de CS Mount variant is ontworpen om te worden gebruikt met verwisselbare lenzen in zowel CS als C mount uitvoeringen (C mount lenzen vereisen het gebruik van de C-CS adapter die bij dit objectief wordt meegeleverd). Andere uitvoeringen van de lens kunnen worden aangepast met behulp van lensadapters van derden.De High Quality Camera is zeer geschikt voor industriële en consumententoepassingen, zoals beveiligingscamera's, die het hoogste niveau van visuele getrouwheid en/of integratie met gespecialiseerde optica vereisen. Hij is compatibel met alle modellen van Raspberry Pi vanaf Model B.Specificaties Sensor Sony IMX477R stacked, back-illuminated sensor Resolutie 12,3 megapixels< / td> Sensor formaat 7,9 mm sensor diagonaal Pixel formaat td> 1,55 x 1,55 ?m Output RAW12/10/8, COMP8 Back focus lengte van de lens 2,6–11,8 mm (M12 Mount variant)12,5–22,4 mm (CS Mount variant) Lens sensor formaat 1/2,3' (7,9 mm) of groter IR cut filter Geïntegreerd Ribbon kabellengte 200 mm Tripod houder 1/4'-20 Inbegrepen 1x Print met daarop een Sony IMX477 sensor 1x FPC kabel voor aansluiting op een Raspberry Pi computer 1x Gefreesde aluminium lenshouder met geïntegreerde statiefbevestiging 1x C naar CS Mount adapter 3x Lens borgringen Niet inbegrepenM12 Mount Lens
€ 59,95
Leden € 53,96
Raspberry Pi Foundation Raspberry Pi Pico RP2040 H
Raspberry Pi Pico is een goedkoop, hoogwaardig microcontrollerboard en tevens het eerste product op basis van een door Raspberry Pi zelf ontwikkelde chip. De RP2040 microcontrollerchip ('Raspberry Silicon') biedt een dual-core ARM Cortex-M0+ processor (133 MHz), 256 KB RAM, 30 GPIO-pennen en vele andere interface-opties. Daarnaast is er 2 MB on-board QSPI-flashgeheugen voor code- en gegevensopslag. Features RP2040 microcontroller chip ontwikkeld door Raspberry Pi in Engeland Dual-core ARM Cortex M0+ processor, met een kloksnelheid tot 133 MHz 264 kB SRAM, en 2 MB on-board Flash geheugen Castellated module maakt solderen direct op draagborden mogelijk USB 1.1 host- en apparaatondersteuning Energiezuinige slaap- en slapende modi Programmering via slepen en neerzetten met behulp van massaopslag via USB 26x multifunctionele GPIO-pinnen 2x SPI, 2x I²C, 2× UART, 3x 12-bit ADC, 16x bestuurbare PWM-kanalen Nauwkeurige klok en timer op de chip Temperatuursensor Versnelde drijvende-kommabibliotheken op de chip 8x programmeerbare IO (PIO) toestandsmachines voor aangepaste randapparatuur H-versie van de Raspberry Pi Pico met gesoldeerde pin headers en 3-pin debug connector Downloads Specifications of 3-pin Debig Connector
€ 5,95
Leden identiek
Raspberry Pi Foundation Official Case for Raspberry Pi Zero
The case consists of two parts. It has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids: a plain lid, a GPIO lid (allowing access to the GPIO from above), and a camera lid (which, when used with the short camera cable supplied, allows the Raspberry Pi Camera or Camera Noir to be fitted neatly inside it). Included 1x base 3x lids (plain, GPIO, camera) 1x short camera cable 4x rubber feet
€ 7,95
Leden identiek
Raspberry Pi Foundation Power Supply for Raspberry Pi Build HAT (48 W)
This 48 W (8 VDC, 6 A) power supply is designed for the use with the Raspberry Pi Build HAT. Input: 110-240 VAC Output: 8 VDC, 6 A Cable: 1.5 m, 16 awg
€ 17,95
Leden identiek
Raspberry Pi Foundation Raspberry Pi Build HAT
Build robust, intelligent machines that combine Raspberry Pi computing power with LEGO components.The Raspberry Pi Build HAT provides four connectors for LEGO Technic motors and sensors from the SPIKE Portfolio. The available sensors include a distance sensor, a colour sensor, and a versatile force sensor. The angular motors come in a range of sizes and include integrated encoders that can be queried to find their position.The Build HAT fits all Raspberry Pi computers with a 40-pin GPIO header, including?–?with the addition of a ribbon cable or other extension device?—?Raspberry Pi 400. Connected LEGO Technic devices can easily be controlled in Python, alongside standard Raspberry Pi accessories such as a camera module.Features Controls up to 4 motors and sensors Powers the Raspberry Pi (when used with a suitable external PSU) Easy to use from Python on the Raspberry Pi
€ 34,95€ 27,95
Leden identiek