Zoekresultaten voor "power up a"
Qoitech Otii Arc - Power Supply, Power Meter and Data Acquisition
Otii Arc is the ultimate developer tool for designing highly energy-efficient devices. It is an easy-to-use, all-in-one, featured-packed tool for every developer's table.It records currents and voltages and displays them in real-time as charts and interactive measurements for analysis and comparisons. Recordings can be synchronized with UART debug logs, giving insights into what drains the energy.Otii Arc is compact, portable, and powered via USB from your laptop (DC supply is optional). It comes with a lifetime subscription of Otii software (standard version), a powerful and easy-to-use desktop application for Ubuntu, Windows & macOS, download here. Channels 10 Sampling Rate 4 kSa/s Main Current (<19.5mA) 1 kSa/s other channels Power Supply Voltage 5 V USB optional 7 V - 9 V DC, up to 5 A Power Consumption < 1 W Operating Temperature 15 °C – 25 °C Storage Temperature -20 °C - 60 °C Cooling Method Convection Dimensions 145 mm x 110 mm x 50 mm Weight 500 g Maximum Measurement Length No limits Testing Modes Main Voltage, Main Current, ADC Voltage, ADC Current, Sense+ Voltage, Sense- Voltage, GPI1 level, GPI2 level, UART RX, UART TX Maximum Output Voltage 3.75 V (USB supply, auto range) 4.20 V (USB supply, high range) 4.55 V (DC supply, auto range) 5.00 V (DC supply, high range) Maximum Output Current 5.0 A peak 2.5 A continuous Maximum Input Voltage 5 V on any pin Maximum Input Current 2.5 A sink capability Range Accuracy Resolution Voltage 5 V ±?0.1% + 1.5 mV) 1 mV Current ±19.5 mA±2.7 A2.7 A - 5.0 A ±?0.1% + 50 nA)±?0.1% + 150 uA)±?1%) 5 nA82 uA1.5 mA For more information, click here.Included Qoitech OTii ARC USB to micro-USB cable
€ 995,00€ 899,00
Leden identiek
SparkFun SparkFun Power Delivery Board - USB-C (Qwiic)
De Power Delivery Board maakt gebruik van een standalone controller om te onderhandelen met de voedingsadapters en overschakelen naar een hogere spanning dan alleen 5V. Zo kan deze voedingsadapter verschillende uitgangsspanningen leveren voor verschillende projecten zodat u niet meerdere voedingsadapters nodig heeft om verschillende output te leveren; het bord kan worden verbonden via SparkFun's Qwiic connect systeem, zodat u niet hoeft te solderen of uit hoeft te zoeken hoe het aangesloten moet zijn.Het SparkFun Power Delivery Board maakt gebruik van de power delivery standaard met behulp van een stand-alone controller van STMicroelectronics, de STUSB4500. De STUSB4500 is een USB power delivery controller die zich richt op stroomverbruiker. Het implementeert een eigen algoritme om met een bron (d.w.z. een wall wart of voedingsadapter) te onderhandelen over het vermogen zonder een externe microcontroller nodig te hebben. U hebt echter wel een microcontroller nodig om het bord te configureren. PDO-profielen worden geconfigureerd in een geïntegreerd niet-vluchtig geheugen. De controller doet al het werk van de vermogensonderhandeling en biedt een eenvoudige manier om te configureren via I2C.Om dit bord te configureren is een I2C bus nodig. Het Qwiic systeem maakt het eenvoudig om het Power Delivery bord aan te sluiten op een microcontroller. Afhankelijk van uw toepassing kunt u ook verbinding maken met de I2C bus via de doorgemetalliseerde SDA en SCL aansluitingen.Eigenschappen Ingangs- en uitgangsspanningsbereik van 5-20V Uitgangsstroom tot 5A Drie configureerbare vermogensafgifteprofielen Auto-run Type-C™ en USB PD sink-controller Gecertificeerd USB Type-C™ rev 1.2 en USB PD rev 2.0 (TID #1000133) Geïntegreerde VBUS-spanningsbewaking Geïntegreerde VBUS switch gate drivers (PMOS)
€ 34,95
Leden € 31,46
Elektor Classics The Elektor Power Supply Collection (USB-stick)
Meer dan 200 voedingsschakelingen voor thuis Deze USB-stick bevat meer dan 200 verschillende voedingsschakelingen uit de jaargangen 2001-2022 van Elektor. Met de artikelzoekfunctie kunt u full-text zoeken. De resultaten worden altijd weergegeven als voorgeformatteerde PDF-documenten. Highlights Cuk-omzetter Automatische batterijwisseling LED batterijspanning Digitale tafelvoeding Lithium-Ion-oplader Oplader voor zonnecellen Elektronische zekering Hoogspanningsregelaar Voeding voor USB-apparaten Step-up Converter voor LED's Batterijbeheer en nog veel meer... Op de stick vindt u ook een map met extra materiaal zoals PCB lay-outs, Gerber-bestanden en software.
€ 49,95€ 34,95
Leden identiek
Elektor Special: Power Supplies and Batteries
Whatever the methods or even then financial means you have to make your circuits work, the power supply should rank high if not Number One in your considerations. The design block simply called “power supply” is hugely underrated both in electronics creation and repair. Yet, the “PSU” has enormous diversity and comes in wildly differing guises like AC/DC, generator, battery (rechargeable or not), PV panel, benchtop, linear or switch-mode, to mention but a few. The output ranges are also staggering like nano-amps to kiloamps and the same for voltages.This special covers the features and design aspects of power supplies.ContentsBasics Battery ManagementWhat to be aware of when using (Lithium) batteries. Fixed-Voltage Power Supply using Linear RegulatorsThe best result right after batteries. Light Energy HarvestingA small solar panel is used in an energy harvesting project to manage and charge four AAA cells. Mains Powered Adapter DesignBasic circuits and tips for transformers, rectification, filtering and stabilization. LM317 Soft StartThe high inrush current pulse should be avoided. Controllable RectifiersSome suggestions to keep the power loss in the linear regulator as low as possible. Components Worksheet: The LM117 / LM217 / LM317 Voltage Regulators SupercapsLow voltage but lots of current… or not? Reviews JOY-iT RD6006 Benchtop Power Supply Kit Siglent SDL1020X Programmable DC Electronic Load Projects Balcony Power PlantDIY solar balcony = speedy payback! DIY LiPo Supercharger KitFrom handcrafted to mass market Dual-Anode MOSFET ThyristorFaster and less wasteful than the old SCR Battery JuicerDo not throw away, squeeze! High-Voltage Power Supply with Curve TracerGenerate voltages up to 400 V and trace characteristics curves for valves and transistors High Voltage Supply for RIAAFor RIAA tube preamps and other applications. MicroSupplyA lab power supply for connected devices Phantom Power Supply using Switched CapacitorsVoltage tripler using three ICs The SMPS800RE Switch-Mode Supply for the Elektor Fortissimo-100Reliable, light and affordable Soft Start for PSUBe nice to your power supply – and its load UniLab 20-30 V, 3 A compact switch-mode lab power supply Tips Soft Start for Step-Down Switching Regulators Low Loss Current Limit Powerbank Surprise A Virtual Ground Battery Maintainer Battery Pack Discharger Connecting Voltage Regulators in Parallel
€ 14,95
Leden € 13,46
JOY-iT JOY-iT DPM8605 Programmable Power Supply (0-60 V, 0-5 A)
The JT-DPM8605 is a programmable buck power supply which converts voltage and current down. It has both a constant voltage – and a constant current mode. With its TTL interface, it is possible to manage any setting comfortably via your PC with a free software. This easy operability and the high accuracy of the current and voltage display make this device stand out. On the device, there are 4 buttons to control it manually, too. The display has got a diagonal of 1.7 Inch (4.3 cm).As optional equipment for this power supply, there is a wireless control panel available, which enables telecommanding from a distance of up to 10 meters (without any obstacles) to any setting and data.Specifications Interface TTL Input Voltage 10-75 VDC Output Voltage 0-60 VDC Output Current 0-5 A Power 0-300 W Voltage Resolution 10 mV Current Resolution 1 mA Ripple <50 mVpp Response Time <50 ms Voltage Display Accuracy 10 mV Current Display Accuracy 1 mA Voltage Fault Tolerance 2 ‰ + 1 digit Current Fault Tolerance 5 ‰ + 1 digit Operating Temperature -10°C - 45°C Dimemsions 131 x 112 x 55 mm Weight 260 g Downloads JT-DPM8605 Datasheet JT-DPM8600 Manual JT-DPM86xx Driver Software
€ 42,95
Leden € 38,66
Elektor Digital Elektor Special: Power Supplies and Batteries (PDF)
Whatever the methods or even then financial means you have to make your circuits work, the power supply should rank high if not Number One in your considerations. The design block simply called “power supply” is hugely underrated both in electronics creation and repair. Yet, the “PSU” has enormous diversity and comes in wildly differing guises like AC/DC, generator, battery (rechargeable or not), PV panel, benchtop, linear or switch-mode, to mention but a few. The output ranges are also staggering like nano-amps to kiloamps and the same for voltages.This special covers the features and design aspects of power supplies.ContentsBasics Battery ManagementWhat to be aware of when using (Lithium) batteries. Fixed-Voltage Power Supply using Linear RegulatorsThe best result right after batteries. Light Energy HarvestingA small solar panel is used in an energy harvesting project to manage and charge four AAA cells. Mains Powered Adapter DesignBasic circuits and tips for transformers, rectification, filtering and stabilization. LM317 Soft StartThe high inrush current pulse should be avoided. Controllable RectifiersSome suggestions to keep the power loss in the linear regulator as low as possible. Components Worksheet: The LM117 / LM217 / LM317 Voltage Regulators SupercapsLow voltage but lots of current… or not? Reviews JOY-iT RD6006 Benchtop Power Supply Kit Siglent SDL1020X Programmable DC Electronic Load Projects Balcony Power PlantDIY solar balcony = speedy payback! DIY LiPo Supercharger KitFrom handcrafted to mass market Dual-Anode MOSFET ThyristorFaster and less wasteful than the old SCR Battery JuicerDo not throw away, squeeze! High-Voltage Power Supply with Curve TracerGenerate voltages up to 400 V and trace characteristics curves for valves and transistors High Voltage Supply for RIAAFor RIAA tube preamps and other applications. MicroSupplyA lab power supply for connected devices Phantom Power Supply using Switched CapacitorsVoltage tripler using three ICs The SMPS800RE Switch-Mode Supply for the Elektor Fortissimo-100Reliable, light and affordable Soft Start for PSUBe nice to your power supply – and its load UniLab 20-30 V, 3 A compact switch-mode lab power supply Tips Soft Start for Step-Down Switching Regulators Low Loss Current Limit Powerbank Surprise A Virtual Ground Battery Maintainer Battery Pack Discharger Connecting Voltage Regulators in Parallel
€ 11,95
Leden € 10,76
DiP-Pi Pico Power Master for Raspberry Pi Pico
The DiP-Pi Power Master is an Advanced Powering System with embedded sensors interfaces that cover most of possible needs for application based on Raspberry Pi Pico. It can supply the system with up to 1.5 A @ 4.8 V delivered from 6-18 VDC on various powering schemes like Cars, Industrial plant etc., additionally to original micro-USB of the Raspberry Pi Pico. It supports LiPo or Li-Ion Battery with Automatic Charger as also automatic switching from cable powering to battery powering or reverse (UPS functionality) when cable powering lost. Extended Powering Source (EPR) is protected with PPTC Resettable fuse, Reverse Polarity, as also ESD.The DiP-Pi Power Master contains Raspberry Pi Pico embedded RESET button as also ON/OFF Slide Switch that is acting on all powering sources (USB, EPR or Battery). User can monitor (via Raspberry Pi Pico A/D pins) battery level and EPR Level with PICO’s A/D converters. Both A/D inputs are bridged with 0402 resistors (0 OHM) therefore if for any reason user needs to use those Pico pins for their own application can be easy removed. The charger is automatically charging connected battery (if used) but in addition user can switch charger ON/OFF if their application needs it. DiP-Pi Power Master can be used for cable powered systems, but also for pure Battery Powered System with ON/OFF. Each powering source status is indicated by separate informative LEDs (VBUS, VSYS, VEPR, CHGR, V3V3).User can use any capacity of LiPo or Li-Ion type; however, must take care to use PCB protected batteries with max discharge current allowed of 2 A. The embedded battery charger is set to charge battery with 240 mA current. This current is set by resistor so if user need more/less can himself to change it.In Addition to all above features DiP-Pi Power Master is equipped with embedded 1-wire and DHT11/22 sensors interfaces. Combination of the extended powering, battery, and sensors interfaces make the DiP-Pi Power Master ideal for applications like data logger, plants monitoring, refrigerators monitoring etc.DiP-Pi Power Master is supported with plenty of ready to use examples written in Micro Python or C/C++.SpecificationsGeneral Dimensions 21 x 51 mm Raspberry Pi Pico pinout compatible Independent Informative LEDs (VBUS, VSYS, VEPR, CHGR, V3V3) Raspberry Pi Pico RESET Button ON/OFF Slide Switch acting on all powering sources (USB, EPR, Battery) External Powering 6-18 V DC (Cars, Industrial Applications etc.) External Power (6-18 VDC) Level Monitoring Battery Level Monitoring Inverse Polarity Protection PPTC Fuse Protection ESD Protection Automatic Battery Charger (for PCB protected LiPo, Li-Ion – 2 A Max) Automatic/User Control Automatic Switch from Cable Powering to Battery Powering and reverse (UPS Functionality) Various powering schemes can be used at the same time with USB Powering, External Powering and Battery Powering 1.5 A @ 4.8 V Buck Converter on EPR Embedded 3.3 V @ 600mA LDO Embedded 1-wire Interface Embedded DHT-11/22 Interface Powering Options Raspberry Pi Pico micro-USB (via VBUS) External Powering 6-18 V (via dedicated Socket – 3.4/1.3 mm) External Battery Supported Battery Types LiPo with protection PCB max current 2A Li-Ion with protection PCB max current 2A Embedded Peripherals and Interfaces Embedded 1-wire interface Embedded DHT-11/22 Interface Programmer Interface Standard Raspberry Pi Pico C/C++ Standard Raspberry Pi Pico Micro Python Case CompatibilityDiP-Pi Plexi-Cut CaseSystem Monitoring Battery Level via Raspberry Pi Pico ADC0 (GP26) EPR Level via Raspberry Pi Pico ADC1 (GP27) Informative LEDs VB (VUSB) VS (VSYS) VE (VEPR) CH (VCHR) V3 (V3V3) System Protection Direct Raspberry Pi Pico Hardware Reset Button ESD Protection on EPR Reverse Polarity Protection on EPR PPTC 500 mA @ 18 V fuse on EPR EPR/LDO Over Temperature protection EPR/LDO Over Current protection System Design Designed and Simulated with PDA Analyzer with one of the most advanced CAD/CAM Tools – Altium Designer Industrial Originated PCB Construction 2 ozcopper PCB manufactured for proper high current supply and cooling 6 mils track/6 mils gap technology 2 layers PCB PCB Surface Finishing – Immersion Gold Multi-layer Copper Thermal Pipes for increased System Thermal Response and better passive cooling Downloads Datasheet Datasheet
€ 17,95€ 14,95
Leden identiek
JOY-iT JOY-iT DPS5005 Programmable Power Supply
This power supply combines analog and digital technologies in an advanced design, offering outstanding precision and accuracy. The adjustable output reaches up to 50 V or 5 A and can be precisely configured in 10 mV or 1 mA steps. The operation of the device has been optimised for particularly simple operation and the colour display offers a particularly detailed and comprehensive presentation of information. Among other things, the current voltage and current values, pre-settings and output powers can be depicted here. Dynamic notification symbols also provide a clear overview. The additional settings menu offers maximum control of overcurrent and overvoltage values as well as other parameters. The DPS5005 offers modern design and advanced technology in a compact package, making it the ideal power supply. Input voltage 6 V - 55 V Output voltage 0 - 50 V Output current 0 - 5 A Output power 0 - 250 W Weight 88g Display size 1,44“ Case cut-out 39 x 71 mm Dimensions 42 x 45 x 80 mm Accuracy of the output voltage ± 0,5% Accuracy of the output current ± 0,5%
€ 42,95
Leden € 38,66
JOY-iT StromPi 3 Power Solution voor Single Board Computers
Met de StromPi 3 heeft JOY-iT nu het volgende uitbreidingsbord op de markt gebracht dat aan uw stroombehoefte zal voldoen. Met een spanningsbereik van 6-61 V en een stroom tot 3 A, kunnen zelfs grotere projecten van voldoende stroom worden voorzien. De afzonderlijke ingangen kunnen nu op verschillende manieren worden geprioriteerd, waardoor de StromPi 3 perfect aan uw project kan worden aangepast. Naast de reeds beschikbare spanningsingangen kan de nieuwe StromPi 3 nu worden aangevuld met een optionele plug-in batterij-unit die met een LiFePO4-batterij een oplaadbare noodstroombron toevoegt aan uw Raspberry Pi. Hierdoor behoren onverwachte stroomonderbrekingen tot het verleden! Daarnaast heeft de StromPi 3 nu ook zijn eigen configureerbare en autonoom werkende microsysteemunit, die gebruikt kan worden voor een programmeerbaar start-stop gedrag. Laat uw systeem op vooraf ingestelde tijden op en neer lopen om metingen uit te voeren of om apparaten aan en uit te schakelen (ook ideaal voor digital signage of machinebesturing). De RTC (real-time klok) in het microsysteem kan ook worden gebruikt om de werkende Raspberry Pi te synchroniseren zonder toegang tot internet. Met de nieuwe StromPi 3 bent u perfect toegerust voor allerlei projecten! Technische specificaties Voltage-ingang Micro-USB, breed bereik: 6-61 V Voltage uitgang 5 V, 3 A / RPi-PinHeader + USB Compatibel met Raspberry Pi (A+, B+, 2B, 3, 3B, 3B+, 4B), Banana Pi M2, via USB-uitgang: veel meer single board computers zoals Arduino, pcDuino, Red Pitaya en nog veel meer Optionele Uitbreidingen Inplugbaar batterijpakket (apart verkrijgbaar) met een 1000 mAh LiFePO4 batterij Microcontrollerbesturing Programmeermogelijkheid door prioriteit te geven aan de afzonderlijke ingangen in geval van nood (Power Path) Extra functies RTC real-time klok (programmeerbaar start/stop-gedrag), besturing via seriële interface (data-uitgang, besturing), optionele oplaadbare batterij wordt tijdens bedrijf direct opgeladen Afmetingen Afmetingen 55 x 54 x 20 mm Downloads Klik hier voor bijgewerkte handleidingen, scripts en nieuwe firmware >>
€ 69,95
Leden € 62,96
JOY-iT PoE Splitter (5 V) - Power over Ethernet for Single Board Computers
Features Jack: 1x Micro USB power plug + 1x RJ45 output port Input Voltage: 36~57 V (standard PoE voltage 48 V, 52 V) Output Voltage: DC 5 V Output Current: 2 A Transmission Distance: 10~100 m PoE Protocol: IEEE802.3af Network Bandwidth: 10/100 Mbps Weight: 40 g Product Dimension: 82 x 28 x 23 mm Cable Length: 205 mm Operation Temperature: -50 °C up to +75 °C
€ 16,95
Leden € 15,26
SparkFun SparkFun Artemis Module - Low Power Machine Learning BLE Cortex-M4F
De flexibiliteit van de Artemis module start met SparkFun's Arduino core. Je kunt de Artemis module programmeren en gebruiken net zoals je dat met een Uno of een andere Arduino zou doen. De tijd om voor het eerst te knipperen is slechts 5 minuten verwijderd! We hebben de kern vanaf de grond opgebouwd, om hem snel en zo licht mogelijk te maken.Dan de module zelf. Met een afmeting van 10 mm x 15 mm heeft de Artemis module alle ondersteunende schakelingen die je nodig hebt om de fantastische Ambiq Apollo3 processor te gebruiken in je volgende project. We zijn er trots op te kunnen zeggen dat de SparkFun Artemis module de eerste open-source hardware module is waarvan de ontwerp bestanden vrij en gemakkelijk beschikbaar zijn. We hebben de module zorgvuldig ontworpen zodat het implementeren van Artemis in uw ontwerp gedaan kan worden met low-cost 2-layer PCBs en 8mil trace/space.Gemaakt in de USA bij SparkFun's Boulder productielijn, is de Artemis module ontworpen voor consumer-grade producten. Dit onderscheidt de Artemis echt van zijn Arduino broeders. Klaar om uw product te schalen? De Artemis groeit met u mee buiten de Uno footprint en Arduino IDE. Bovendien, de Artemis heeft een geavanceerde HAL (hardware abstractie laag), waardoor gebruikers de moderne Cortex-M4F architectuur tot het uiterste kunnen drijven.De SparkFun Artemis Module is volledig FCC / IC / CE gecertificeerd en is beschikbaar in volledige tape en haspel hoeveelheden. Met 1M flash en 384k RAM, heb je genoeg ruimte voor je code. De Artemis module draait op 48MHz met een 96MHz turbo mode beschikbaar en met Bluetooth om op te starten!
€ 12,95
Leden € 11,66
PeakTech PeakTech 6227 DC Switching Power Supply (0-60 V, 0-6 A) with colour LCD & 2x USB
This laboratory power supply offers a controllable 0...60 V or 0...6 A DC main output with a maximum continuous power of 150 W. For developers, this laboratory power supply offers two switchable USB outputs with their own LCD display with voltage and current values.If you use a load up to 2.5 A, you can set the output voltage up to 60 V. If you want to use a higher current up to 6 A, set the load to a maximum of 25 V. Of course, all stages are also adjustable in between, e.g. 30 V/5 A, 40 V/3.7 A or 50 V/3 A.The current and voltage setting also can be done when the output is switched off. By pressing the knob for current or voltage, the setting resolution can be fine/coarse switched from 1 mA to 100 mA or 10 mV to 1 V.Due to the high range of functions and the simple operation with the best price-performance ratio, this laboratory power supply is ideal for the education, hobby, development and service sector. Blue LCD display showing the output voltage and current values Green LCD display showing the USB output voltage and current values 150 W constant output power Adjustable voltage range: 0~60 V at 0~2.5 A and 0~25 V at 2.5~6 A Voltage and current pre-selection with switchable output C.C. (Constant Current) and C.V. (Constant Voltage) mode with connected load Protection against short circuit, overload and overtemperature Accessories: Power cable, Connection Leads and Manual Output Voltage 0 ~ 60 V DC (@2,5 A) Output Current 0 ~ 6 A DC (@ 25 V) Output Power 150 W Display Resolution (V) 10 mV Display Resolution (A) 1 mA Setting Resolution (V) 10 mV / 1 V switchable Setting Resolution (A) 1 mA / 100 mA switchable Ripple & noise ? 5 mV RMS; ? 20 mA RMS Load regulation ? 0.05% + 5 mV, ? 0.5% + 5 mA Line regulation ? 0.1% + 3 mV, ? 0.2% + 3 mA Display accuracy +/- 0,5% + 5 dgt. Protection Overload, overtemperature, short circuit Operating voltage 115 / 240 V AC; 50/60 Hz Dimensions (WxHxD) 80 x 160 x 260 mm Weight 1.6 kg
€ 129,95
Leden € 116,96