Zoekresultaten voor "fume"
Aoyue 8486 Fume Extractor
De Aoyue 8486 rookafzuiger maakt gebruik van 3 filters, waaronder HEPA en actieve koolkorrels, die zorgen voor een maximale extractie efficiëntie. Dit verwijdert 97% van de deeltjes groter dan 0,3 um. Plaats de arm van de rookafzuiger eenvoudig boven het soldeerwerk, daar waar u de rook verwacht. Kies het juiste vermogen voor de rookafzuiging met behulp van de bedieningsknop en de grote uitlezing op het voorpaneel. De Aoyue 8486 zuigt dan soldeerrook, veroorzaakt door smeltend vloeimiddel en andere dampen, weg van uw gezicht zodat u vrij kunt ademen. Kenmerken Desktop rookafzuigsysteem met HEPA-filter (high efficiency particulate air filter) voor het verwijderen van stofdeeltjes en een verbeterd actief koolstof filtratiesysteem. Met echte koolstof filterkorrels. Grote zuigkracht, stille werking. Elektronisch bedieningspaneel met variabele luchtstroomregeling. Subfilters verlengen de levensduur van de hoofdfilters. Vrijstaande afzuigarm. Afzuigarm kan naar wens worden gebogen en behoudt vorm na verdraaiing. Het apparaat heeft montagegaten zodat hij aan de muur kan worden bevestigd om zo bureauruimte vrij te maken. Specificaties Voeding 220 V DC spanning 12 V Zuigventilator 3,59 m/s Zuigkracht 18-100% HEPA-filter H11 class Koolstoffilter Activated carbon 800 IV (cilinder type) Afmetingen 184 x 184 x 152 mm (B x H x D) Gewicht 1,8 kg Inbegrepen Basisstation Flexibele afzuigarm Filterkap HEPA-filter Actief koolstoffilter Sub-luchtfilter DC voeding Gebruiksaanwijzing
€ 179,95
Leden € 161,96
Hobby Creek Hobby Creek Fume Extractor Arm
Blow away the fumes with this handy little fume extractor! This extractor comes ready to run and can be powered off any USB power source with the included 6 foot cable. Simply screw it into any of our Third Hand products, plug in the cable and let her rip! The 3D printed housing creates a compact and durable enclosure that holds the carbon filter to the fan. This system not only pulls away the fumes but also filters it. The small size and flexible arm allows you to place the extractor exactly where you need it. What you get Pre-assembled fume extractor on an arm 6 foot USB micro cable Spare carbon filter Tech Specs Housing dimensions: 2.25 x 2 x 1.25 inch Arm Length: 12' Current Draw: 500 mA Voltage: 5 V (any USB port will work) Note: power source not included. Can use any USB port including phone chargers or computers.
€ 35,95
Leden € 32,36
Zhongdi Soldeerdampafzuiger ZD-153A
De dampen die vrijkomen tijdens het solderen zijn mogelijk schadelijk voor de gezondheid. Deze soldeerdampafzuiger wordt stevig met een beugel aan de werktafel bevestigd. Dankzij de 3 assen kan de soldeerdampafzuiger perfect op de juiste plek worden gepositioneerd, d.w.z. direct boven de opstijgende soldeerdampen. De schadelijke soldeerdampen worden afgezogen door een krachtige maar stille ventilator, en gefilterd door een actief koolstoffilter. Kenmerken Zuigt soldeerdampen weg Absorbeert giftige gassen en dampen van soldeerwerkzaamheden Vermindert de kans op hoofdpijn, oogirritatie en misselijkheid Instelbare absorptiehoek voor nauwkeurige plaatsing Eenvoudig vervangbaar actief koolstoffilter Krachtige ventilator Laag geluidsniveau en lange levensduur Specificaties Absorptiecapaciteit: 1 m³/min (max.) Stroomverbruik: 23 W Voeding: 220-240 VAC Hoeveelheid actief koolstoffilter: 7 g Maximaal absorptiegewicht: 2 g Afmetingen: 220 x 270 x 168 mm (B x H x D) Gewicht: 1,4 kg
€ 69,95€ 34,95
Leden identiek
Replacement Filter Set for Aoyue 8486 Fume Extractor
Deze complete vervangende filterset voor de Aoyue 8486 rookafzuiger bevat een HEPA (High Efficiency Particulate Air) filter, een katoenen lucht-(sub)filter en een actief koolstof luchtfilter.
€ 49,95€ 34,95
Leden identiek
Zhongdi Temperature-controlled Soldering Station with Fume Extractor & LED Light (3-in-1) ZD-8951
De ZD-8951 is een 3-in-1 temperatuurgeregeld digitaal soldeerstation met ingebouwde rookafzuiging en LED-verlichting. De rapid-heating functie bereikt een temperatuur van 400°C in minder dan 1 minuut. Specificaties (Soldeerbout) Vermogen: 60 W (max. 130 W) Temperatuurbereik: 160 °C tot 480 °C (320 °F tot 896 °F) PTC rapid-heating element Met °C/°F conversiefunctie Temperatuur kan eenvoudig worden aangepast met de knop. LCD-scherm met wisselende achtergrondverlichting. Met de rapid-heating functie duurt het minder dan 1 minuut om van kamertemperatuur naar een temperatuur van 400 °C (752 °F) te stijgen. Specificaties (Rookafzuiger) Vermogen: 23 W Luchtafzuiging: 1 m³/min (max) Specificaties (LED-verlichting) Vermogen: 5 W Verlichting: 12 LED's Helderheid: 242 lm
€ 84,95€ 69,95
Leden identiek
Fumetractor - USB-Charge-Addon
Fumetractor – USB-Charge-Addon
€ 19,95
Leden € 17,96
Fibox Enclosure MNX PC 100/60 HT
Fibox offers a quality enclosure that can be mounted to a wall, pole or frame. Material: Polycarbonate Temperatures: -40 °C to 80 °C Smoked transparent cover Ingress Protection (EN 60529): IP66/IP67 Dimensions: 130 x 80 x 60 mm Included Base with TPE gasket, screws for mounting plate/DIN-rail and cover with polyamide cover screws.
€ 17,95
Leden € 16,16
Velleman Velleman Start to Solder (Christmas Edition)
This set includes all necessary tools to start soldering, plus two festive minikits to put your skills to the test.The basic tools for soldering are a soldering iron (110 VAC version) and a support piece. We also included lead-free solder which is pretty easy to work with and its fumes are not harmful! Lastly, you’ll need some side cutters to trim the component’s leads.The first minikit is the electronic candle, it has a warm yellow LED that mimics a real candle! This little solder kit only has 6 components to solder, which makes it the ideal starter kit.Then it’s time to expand your skills with the original electronic Christmas tree kit. Solder more advanced components and a whopping 16 red LEDs.Each kit is accompanied by an illustrated and comprehensive manual to make sure that anyone can master the art of soldering.Features Soldering iron and support (230 VAC version) Lead-free solder Side cutters 2 minikits
€ 22,95€ 19,95
Leden identiek
Pimoroni Enviro+ Environmental Monitoring Station for Raspberry Pi
Designed for environmental monitoring, Enviro+ lets you measure air quality (pollutant gases and particles*), temperature, pressure, humidity, light, and noise level. Enviro+ is an affordable alternative to environmental monitoring stations that can cost tens of thousands of pounds and, best of all, it's small and hackable and lets you contribute your data to citizen science efforts to monitor air quality via projects like Luftdaten. Features BME280 temperature, pressure, humidity sensor (datasheet) LTR-559 light and proximity sensor (datasheet) MICS6814 analog gas sensor (datasheet) ADS1015 analog to digital converter (ADC) (datasheet) MEMS microphone (datasheet) 0.96' colour LCD (160 × 80) pHAT-format board Fully-assembled Compatible with all 40-pin header Raspberry Pi models Pinout Python library Citizen science air quality monitoring This board was developed in collaboration with the University of Sheffield, with the aim of letting you contribute real-time air quality data from your local area to open data projects like Luftdaten. Devices like Enviro+ allow fine-grained, detailed datasets that let us see shifts in air quality through time and across different areas of cities. The dataset gets better in quality every time an additional The more devices that contribute data, the better quality the dataset becomes. Particulate matter (PM) is made up of tiny particles that are a mix of sizes and types, like dust, pollen, mould spores, smoke particles, organic particles and metal ions, and more. Particulates are much of what we think of as air pollution. The analog gas sensor can be used to make qualitative measurements of changes in gas concentrations, so you can tell broadly if the three groups of gases are increasing or decreasing in abundance. Without laboratory conditions or calibration, you won't be able to say 'the concentration of carbon monoxide is n parts per million', for example. Temperature, air pressure and humidity can all affect particulate levels (and the gas sensor readings) too, so the BME280 sensor on Enviro+ is really important to understanding the other data that Enviro+ outputs. You can implement Enviro+ in IoT applications as well. By connection it to Alexa you can get information about the temperature and humidity of the air by simply asking, or there's also an option to set up a trigger action with IFTTT that turns your Philips Hue lights on when the light level drops below a certain level etc. Software With the Python library you can control control all the parts of your Enviro+. There's a bunch of examples for each of the individual parts, an all-in-one example that shows you the data from Enviro+'s sensors in a visual way.
€ 64,95
Leden € 58,46
L'électronique pour les débutants
Vous rêvez de débuter en électronique mais ne savez par où commencer ? Est-ce fiable d?explorer l?internet qui regorge d?explications et de schémas d?origine inconnue ? Faut-il acheter un livre avec des montages simples ou plutôt un livre sur les composants électroniques ? Fin pédagogue, l?auteur de ce livre écrit pour les débutants dans un style inédit, et répond d?abord aux questions prosaïques du néophyte : quel fer à souder acheter ? Un multimètre à 5 ? peut-il suffire ? Un oscilloscope est-il indispensable ? Peut-on installer son montage dans une boîte à cigares ? Et bien d?autres interrogations que trop de livres laissent en suspens. Rémy Mallard démystifie l?électronique en n?utilisant que ce qu?il vous faut de théorie pour aborder la pratique sans risque de faire de trop grosses bêtises. Apprenez à identifier les composants et leur rôle mais aussi à les récupérer, les tester et les ranger. Apprenez à lire un schéma, à choisir vos outils et à mettre en boîte vos montages. Rémy signale les pratiques à éviter. Il a beaucoup d?expérience et connaît plein d?astuces. La matière de cet ouvrage, ce sont des montages simples et ludiques, réalisables sur des plaques d?expérimentation sans soudure : sirène, orgue, chenillard, interrupteur photosensible, thermomètre, alarme, générateur de picotements, indicateur de niveau de liquide, clignotant à vitesse « photodépendante », indicateur à fenêtre programmable, minuterie avec préavis d?extinction, chenillard de style K2000, gradateur de lumière à commande infrarouge. Après trente ans de pratique de l?électronique au niveau aussi bien professionnel qu?amateur, l?auteur, resté l?éternel débutant qui réalisait lui-même son premier montage dès l?âge de dix ans, partage sa soif d?apprendre. Attention, c?est contagieux.
€ 42,50
Leden € 38,25
Fumetractor with LED Light
The soldering fume is sucked in by a 60 mm fan and released upwards through an easily replaceable activated carbon filter. All SMD components are already assembled; the user must assemble the rest. Features Small, compact design Quiet operation Enhanced LED lighting Easy to change the activated carbon filter Dimensions: 130 x 83 x 74mm 1-button usability Short press: turn the fan on or off Longer press (>0,5 s): turn the fan and the LED light on Extra long press (>1 s): turn everything on and change the brightness of LED-light Included in the kit: 1 x Board (all SMD parts pre-assembled, tested, with firmware, depending on variant) 1 x Fan (60 mm, >60.000 h) 1 x Fan guard grille 1 x Plug/socket for fan 1 x Short-travel pushbutton, angled 1 x LED light kit 4 x M4 screws (fan mounting) 4 x Nuts M4 + fuse 8 x Screws M3 (housing) 8 x Square nuts M3 2 x Activated carbon filter For more information, please visit the eHajo Dokuwiki.