Zoekresultaten voor "dso o"
JYE Tech JYE Tech DSO Coral 112A Oscilloscope
DSO Coral (112A) is an upgraded model of DSO112 with re-designed schematic and PCB. Due to the new design this oscilloscope becomes more accurate and reliable. As high as 2 mV/div sensitivity and ultra low background noise made the device particularly useful for measuring weak signals. Up to 24 presets with customizable titles allow setups be retrieved in seconds. While keeping all performance of DSO112 this new model brings in the following improvements: Maximum sensitivity was increased to 2 mV/div (older version is 5 mV/div) with lower background noises. Fixed the vertical position mismatch problem found in the older model. Save/recall up to 24 parameter presets. This allows quick setup for frequently performed measurements. Preset titles can be customized for easy remembering and identifying. Expanded and improved on-screen measurement displays which include frequency, Vmax, Vmin, Vavr, Vpp, and Vrms. Added external trigger feature. Provided a two-way serial control interface which can output data/measurements and receive commands. This will make the device suitable for integration to customer applications. Replaced out-dated miniUSB connector with more popular microUSB connector. Enclosure strength enhanced. CE certified Specifications Vertical Number of Channel: 1 Analog Bandwidth: 0 - 2MHz Sensitivity: 2 mV/Div - 20 V/Div Sensitivity error: <5% Resolution: 8-bit Input Impedance: 1M ohm Maximum Input voltage: 50 Vpk Coupling: DC, AC, GND Voltage measurement cursors available Auto-measurement of Vavr and Vpp Horizontal Max Real-time Sampling Rate: 5 Msps Timebase: 1 us/Div - 50 s/Div Record Length: 512 and 1024 variable Time measurement cursors available Trigger Trigger Modes: Auto, Normal, Single Trigger Types: Rising/falling edge Trigger Position: 1/8, 1/4, 1/2, 3/4, and 7/8 of buffer size Trigger Source: internal, external External trigger voltage range: 0 - 15 V Test Signal Generator 7 frequencies from 1 Hz to 1 MHz selectable. Amplitude 3.3 V fixed Other Features Save captured waveform to EEPROM and recall after power outage Save/recall up to 24 presets Serial data/control interface USB firmware upgrade Display 2.4' color TFT LCD with 320 x 240 resolution Power Supply 3.7 V Li-ion battery/USB Supply Current: 300 mA @ 3.7 V(LCD backlight ON). Built-in charger Physical Dimension: 80 x 70 x 18 mm Weight: 85 gram (not including cables) Included 1x DSO112A (Battery included) 1x Standard BNC probe 2x MCX-clip cables 1x USB cable Quick User Guide Downloads Quick User Guide (Rev. 02) User Manual (Rev. 02) Firmware
€ 79,95€ 59,95
Leden identiek
JYE Tech JYE Tech DSO Shell 150 Oscilloscope DIY Kit
Compared to DSO138, the new DSO Shell has similar bandwidth with significant improvements in structure, mechanical, and operation. The sensitivity has been extended in both directions : 5mV/div – 20V/div (DSO138: 10mV/div – 5V/div.Display and MCU are now mounted on the same mainboard to avoid inter-board pin-headers.For better separation between analog and digital circuits, the analog channel is on a separated board. Without the analog portion, the mainboard is actually a general-purpose control board. The mainboard is fully installed (except a few through-hole components), and factory tested.DSO Shell comes with an easy to modify enclosure. Rotary encoder makes parameter adjustment quick and easy.Power supply (not included): 9V (< 10V!) standard 5.5mm/2.1mm DC plug or 2-pin connector (0.1' pitch)Adequate soldering and troubleshooting skills required. Mainboard: 109-15000-00E or 109-15000-00E1 (Performance & assembly are identical) Analog board: 109-15001-00E or 109-15001-00F (Performance & assembly are identical) Product Documents and firmware: Users Manual (for 109-15001-00C analog board) Users Manual (for 109-15001-00E analog board) Schematic Main board schematic Analog board schematic Firmware How to Use the DSO150 Library Source code FAQ, Tips, and Troubleshooting Specifications Vertical Number of Channels 1 Analog Bandwidth 0 - 200 kHz Sensitivity 5 mV/Div - 20 V/Div Sensitivity error < 5 % Resolution 12-bit Input Impedance 1 M? Maximum Input voltage 50 Vpk Coupling DC, AC, GND Horizontal Max Real-time Sampling Rate 1 Msps Timebase 10 µs/Div - 500 s/Div Record Length 1024 Trigger Trigger Modes Auto, Normal, Single Trigger Types Rising / falling edge Trigger Position 1 / 2 of buffer size fixed Display 2.4-inch color TFT LCD 320 x 240 px Power Supply 9 V DC (8 - 10 V acceptable) Supply Current 120 mA @ 9 V Physical Dimensions 115 x 75 x 22 mm Weight 100 g without cables & power supply
€ 44,95
Leden € 40,46
FNIRSI FNIRSI DSO-TC3 (3-in-1) Oscilloscoop, componententester & signaalgenerator
De DSO-TC3 combineert een digitale oscilloscoop, elektronische componenttester, signaalgenerator, geleidingstest, spanningstest, temperatuur- en vochtigheidsmeting, infrarooddecodering, en andere vakkundig geïntegreerde functies. Hij is uitgerust met een 2,4 inch kleuren TFT-scherm en een ingebouwde oplaadbare lithium accu voor mobiel gebruik. Specificaties (oscilloscoop) De oscilloscoop heeft een real-time sample frequentie van 10 MSa/s en een bandbreedte van 500 kHz. Met een complete triggerfunctie (enkelvoudig, normaal, automatisch), ongeacht of u periodieke analoge signalen of niet-periodieke digitale signalen gebruikt. Het maximaal meetbare spanningssignaal is 400 V. Met de efficiënte AUTO modus kan de gemeten golfvorm worden weergegeven zonder omslachtige instellingen. Real-time sample frequentie 10 MSa/s Bandbreedte 500 KHz Ingangsimpedantie 1 M? Type ingangssignaal AC/DC Spanningsbereik meting 400 V Verticale gevoeligheid (x1) 10 mV - 10 V Bereik horizontale tijdbasis 1 ?s - 10 s Trigger modus Auto / Normal / Single Trigger type Stijgende flank / dalende flank Golfvorm freeze Ja Automatische meting Ja Specificaties (componenten tester) Het apparaat kan automatisch verschillende soorten transistors identificeren en meten, waaronder NPN en PNP triodes, N-kanaal- en P-kanaal mosfets, junction mosfets, diodes, dubbele diodes en thyristors, en ook weerstanden, spoelen, condensatoren en andere passieve componenten. Automatische detectie van de pindefinitie. Analyseert automatisch het NEC infrarood transmissie protocol. Andere functionele modi: inclusief geleidingstest, 0-40 V ingangsspanningsmeting, PWM uitgang, 0-32 V zenerdiode meting, DS18B20 temperatuursensor meting, DHT11 temperatuur- en vochtigheidssensor meting, enz. Specificaties (signaalgenerator) De signaalgenerator heeft in totaal 6 golfvormen om uit te kiezen, met instelbare frequentie en amplitude. Sinusgolf 1-100 KHz/0-3,3 V/50% Blokgolf 1-100 KHz/3,3 V/50% Pulsgolf 1-100 KHz/3,3 V/0-100% Driehoeksgolf 1-100 KHz/0-3,3 V/50% Rampgolf 1-100 KHz/0-3,3 V/0-100% DC 0 - 3.3 V Inbegrepen 1x DSO-TC3 1x P6100 oscilloscoopsonde (100 MHz) 3x Testklemmen 1x Adapter 1x USB-C kabel 1x Originele handleiding van FNIRSI (Engels, Chinees, Russisch, Portugees) 1x Elektor handleiding (Engels, Frans, Duits, Italiaans, Nederlands) Downloads Original Manual Firmware v0.3
€ 74,95€ 59,95
Leden identiek
OWON OWON AG051 Arbitrary Waveform Generator (5 MHz)
Features Advanced DDS technology, up to 5 MHz frequency output 125 MS/s sample rate and 1 ?Hz frequency resolution Vertical Resolution: 14 bits and 8K arb waveform length Comprehensive waveform output: 5 basic waveforms and 45 built-in arbitrary waveforms SCPI and LabVIEW supported 4'' high resolution (480 x 320 pixels) LCD Could work with OWON SDS Series DSO smoothly Please note: The photos show 3 additional buttons (Mod, Sweep, Burst) that are not available on the currently available version of the deviceSpecifications Channel Single + Trigger Frequency Output 5 MHz Sample Rate 125 MS/s Vertical Resolution 14 bits Waveform Standard Waveform Sine, Square, Pulse, Ramp, and Noise Arbitrary Waveform Exponential Rise, Exponential Fall, Sin(x)/x, Step Wave, and others, total 45 built-in waveforms, and user-defined arbitrary waveform Frequency (resolution 1 ?Hz) Sine 1 ?Hz - 5 MHz Square 1 ?Hz - 5 MHz Pulse 1 ?Hz - 5 MHz Ramp 1 ?Hz - 1 MHz Noise 5 MHz (-3 dB) (typical) Arb 1 ?Hz - 5 MHz Amplitude Amplitude 1 m Vpp - 12.5 Vpp (50 ?) 1 m Vpp - 25 Vpp (high impedance) Resolution 1 m Vpp, or 4 digits DC Offset Range (AD+DC) ±6.25 V (50 ?), ±12.5 V (high impedance) DC Offset Range Resolution 1 mV, or 4 digits Load Impedance 50 ? (typical) Arbitrary Waveform Wave Length 2 pts to 8K pts Sample Rate 125 MS/s Vertical Resolution 14 bits Non-volatile Memory 64 M bytes Input / Output Display 4' (480 x 320 pixels) LCD Type External reference clock input Communication Interface USB device Mechanical Dimension (W x H x D) 235 x 110 x 295 mm Device Weight 3 kg
€ 199,95
Leden € 179,96
JYE Tech JYE Tech DSO068 Oscilloscope DIY Kit
This kit is particularly suitable for educational use. It uses through-hole components as much as possible. This eases off the requirement of assembly skills and at the same time allows deeper user involvement. It is a great tool for college students. Most importantly it brings in the freedom for users to test, modify, experiment, and even design their own projects. And this means more fun! More over, DSO 068 is not just a kit for training but also a practical tool for everyday use. Parameter setting is simply, straightforward, and quick. Mode switch and utilities are driven by menu. Absolutely no complicate navigation. It was designed on the base of DSO 062 kit and comprises many enhancements in hardware and firmware: Higher sensitivity (10 mV/div vs 100 mV/div) Wider analog bandwidth (3 MHz vs 1 MHz) Larger capture buffer (1024 points vs 256 points) Variable trigger position (1% - 100%) with indicator Test signal generator with variable frequency and amplitude USB connection Upload of captured raw data as CSV file (Example) Work as USB scope (with jyeLab) and data logger (8 channels, 10-bit resolution) Higher sensitivity (0.2 Vpp vs 3 Vpp) in built-in frequecy meter Battery/USB powered Fully enclosured Silicone pushbuttons and rotary encoder Major parts Main circuit board with pre-soldered ICs and a few SMD parts. Board is pre-tested and MCUs on board are pre-programmed. 128 x 64 graphic dot-matrix LCD module. Step-up voltage converter board (JYE116). It boosts battery voltage to 5 V from as low as 2 V. Voltage inverter board (JYE120). It generates -5 V from +5 V with current capacity up to 200 mA. On/Off switch board (JYE117). This is the power switch of instrument. [optional] Li-ion battery charger board (JYE118). It includes the USB/Battery power switch circuit. [optional] USB-Uart converter board (JYE119). This bridges the scope to USB host. [optional] Professional 20 MHz probe with selectable 1X/10X attenuation. Enclosure set including stand, switch caps, etc. All through-hole components, mechanical parts, accessories (battery not included) and Assembly Guide and User Manual. Source codes of student version firmware are also provided for downloading. They are simplified from full version to help users to understand how the oscilloscope works. The sampling rate of student version is limited to 500 Sa/s - 100 KSa/s with no other features. Important Notes Adequate soldering skills and troubleshooting skills to assemble the DSO138 kit are required. Each mainboard has been tested to ensure no short or open on MCU soldering. Each LCD board is also tested to verify soldering is good and display is functional. The other components are provided with good quality at our best knowledge. They are not tested.
€ 79,95
Leden € 71,96
OWON OWON HDS1021M-N 1-ch Oscilloscope (20 MHz) + Multimeter
Features 2 in 1 (DSO + Multimeter) Auto-scale function 20 automatic measurements Bandwidth: 20 MHz USB data transmission supported Waveform record and replay Multimeter newly supported SCPI Rechargeable Li-ion battery (6 hours' backup) 2-in-one measurement deviceOscilloscope + 3 3/4 digits multimeter + FFT spectrum analyzer.Auto-scale functionWhile in auto-scale status, the oscilloscope will switch to the specific trigger mode, vertical scale, and timebase scale according to the type, amplitude, and frequency of input signal.Adjustable trigger sensitivityThanks to adjustable trigger sensitivity, this device filters the overlay noise and triggers the signal stably under the circumstance of noise.Specifications Bandwidth 20 MHz Sample Rate (real-time ) 500 MS/s Horizontal Scale (s/div) 5 ns/div?100 s/div, step by 1?2.5?5 Display 3.7” color TFT display (640 × 480 pixels) Channel single Record Length 24K points Vertical Sensitivity 5 mV/div?5 V/div (at input) Vertical Resolution (A/D) 8 bits Trigger Type Edge and Video Trigger Mode Auto, Normal, and Single Trigger Level ±6 divisions from screen center Acquisition Mode Sample, Peak Detect, and Average Waveform Storage 4 waveforms Communication Interface mini-USB, mini-RS232 Power Supply 100 V-240 V AC, 50/60 Hz Li-ion Battery 7.4 V, 6 hours’ operation Dimensions (W × H × D) 115 × 180 × 40 (mm) Multimeter Specifications Full-Scale Reading 3 (3/4) digits (max 4000-count) diode 0 V - 1.5 V Input Impedance 10 M? On / Off Test < 50 (± 30) beeping Voltage VDC : 400 mV, 4 V, 40 V, 400 V, 1000 V : ±(1% ± 1 digit);max input: DC 1000 V VAC : 4 V, 40 V, 400 V : ±(1% ± 3 digits), 750 V : ±(2% ± 3 digits);Frequency : 40 Hz - 400 Hz; max input : AC 750 V (virtual value) Current DC : 40 mA, 400 mA : ±(1.5% ± 1 digit), 10 A : ±(3% ± 3 digits) AC : 40 mA : ±(1.5% ± 3 digits), 400 mA : ±(2% ± 1 digit), 10 A : ±(5% ± 3 digits) Impedance 400 ? : ±(1% ± 3 digits), 40 ?? 4 ?? : ±(1% ± 1 digit), 40 M? : ±(1.5% ± 3 digits) Capacitance 51.2 nF - 100 µF : ±(3% ± 3 digits) SoftwarePC software for DSO
-
, van David Ashton Review: De zingende en dansende multitester DSO-TC3
De DSO-TC3 is een van die verbazingwekkende alles-in-één meetapparaten die tegenwoordig steeds vaker lijken voor te komen. Het biedt een breed scala aan functies voor...
-
, van Günter Spanner FNIRSI 1014D digitale geheugenoscilloscoop: Goede prestaties voor weinig geld
Voor activiteiten zoals knutselen aan versterkers, sensoren en microcontrollers zoals Arduino's, ESP's, Raspberry Pis of het repareren van consumentenelektronica zijn een bandbreedte van 100 MHz...